首頁 感測器 溫度感測器 數位溫度感測器
首頁
感測器
溫度感測器
數位溫度感測器

LM80

不推薦在新設計中採用

序列介面 ACPI 相容微處理器系統硬體監控器

立即訂購
產品規格表
LM80 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
AMC80 現行 具風扇速度和電源電壓監控器的低功耗本機溫度感測器 Software compatible replacement with improved temperature sensing accuracy and lower power consumption.

LM80

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Operating temperature range (°C) -25 to 125 Supply voltage (min) (V) 2.8 Supply voltage (max) (V) 5.75 Rating Catalog
Operating temperature range (°C) -25 to 125 Supply voltage (min) (V) 2.8 Supply voltage (max) (V) 5.75 Rating Catalog
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4
  • Temperature Sensing
  • 7 Positive Voltage Inputs
  • 2 Programmable Fan Speed Monitoring Inputs
  • 10 mV LSB and 2.56V Input Range Accepts Outputs From Linear Temperature Sensors Such as the LM50
  • Chassis Intrusion Detector Input
  • WATCHDOG Comparison of all Monitored Values
  • Separate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors such as the LM56 or LM75
  • I2C Serial Bus Interface Compatibility
  • Shutdown Mode to Minimize Power Consumption
  • Programmable RST_OUT/OS pin: RST_OUT Provides a Reset Output; OS Provides an Interrupt Output Activated by an Overtemperature Shutdown Event

Key Specifications

  • Voltage Monitoring Error ±1% (Max)
  • Temperature Error (−25°C to +125°C) ±3°C (Max)
  • Supply Voltage Range 2.8 to 5.75 V
  • Supply Current: Operating 0.2 mA typ
  • Supply Current: Shutdown 15 µA typ
  • ADC Resolution 8 Bits
  • Temperature Resolution 0.5ºC

All trademarks are the property of their respective owners.

  • Temperature Sensing
  • 7 Positive Voltage Inputs
  • 2 Programmable Fan Speed Monitoring Inputs
  • 10 mV LSB and 2.56V Input Range Accepts Outputs From Linear Temperature Sensors Such as the LM50
  • Chassis Intrusion Detector Input
  • WATCHDOG Comparison of all Monitored Values
  • Separate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors such as the LM56 or LM75
  • I2C Serial Bus Interface Compatibility
  • Shutdown Mode to Minimize Power Consumption
  • Programmable RST_OUT/OS pin: RST_OUT Provides a Reset Output; OS Provides an Interrupt Output Activated by an Overtemperature Shutdown Event

Key Specifications

  • Voltage Monitoring Error ±1% (Max)
  • Temperature Error (−25°C to +125°C) ±3°C (Max)
  • Supply Voltage Range 2.8 to 5.75 V
  • Supply Current: Operating 0.2 mA typ
  • Supply Current: Shutdown 15 µA typ
  • ADC Resolution 8 Bits
  • Temperature Resolution 0.5ºC

All trademarks are the property of their respective owners.

The LM80 provides 7 positive voltage inputs, temperature measurement, fan speed measurement, and hardware monitoring on an I2C interface. The LM80 performs WATCHDOG comparisons of all measured values and an open-drain interrupt output becomes active when any values exceed programmed limits. A Chassis Intrusion input is provided to monitor and reset an external circuit designed to latch a chassis intrusion event.

The LM80 is especially suited to interface to both linear and digital temperature sensors. The 10 mV LSB and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM50. The BTI is used as an input from either digital or thermostat sensors such as LM75 and LM56.

The LM80's 2.8V to 5.75V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. These include hardware monitoring and protection applications in personal computers, electronic test equipment, and office electronics.

The LM80 provides 7 positive voltage inputs, temperature measurement, fan speed measurement, and hardware monitoring on an I2C interface. The LM80 performs WATCHDOG comparisons of all measured values and an open-drain interrupt output becomes active when any values exceed programmed limits. A Chassis Intrusion input is provided to monitor and reset an external circuit designed to latch a chassis intrusion event.

The LM80 is especially suited to interface to both linear and digital temperature sensors. The 10 mV LSB and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM50. The BTI is used as an input from either digital or thermostat sensors such as LM75 and LM56.

The LM80's 2.8V to 5.75V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. These include hardware monitoring and protection applications in personal computers, electronic test equipment, and office electronics.
filter 尋找其它 數位溫度感測器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor datasheet (Rev. F) 2013年 3月 22日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點