OPA2832

現行

雙低功耗高速固定增益運算放大器

立即訂購

產品規格表

document-pdfAcrobat Dual, Low-Power, High-Speed, Fixed-Gain Operational Amplifier datasheet (Rev. C) (英文)

OPA2832

現行

產品規格表

立即訂購

產品詳細資料

Architecture

Fixed Gain/Buffer

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

300

Vn at flatband (typ) (nV√Hz)

9.3

Vn at 1 kHz (typ) (nV√Hz)

9.2

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

In to V-, Out

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

72

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

27

Iout (typ) (mA)

75

2nd harmonic (dBc)

64

3rd harmonic (dBc)

57

Frequency of harmonic distortion measurement (MHz)

5

Architecture

Fixed Gain/Buffer

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

300

Vn at flatband (typ) (nV√Hz)

9.3

Vn at 1 kHz (typ) (nV√Hz)

9.2

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

In to V-, Out

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

72

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

27

Iout (typ) (mA)

75

2nd harmonic (dBc)

64

3rd harmonic (dBc)

57

Frequency of harmonic distortion measurement (MHz)

5

SOIC (D)

8

29.4 mm² 4.9 x 6

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

HIGH BANDWIDTH: 75MHz (G = +2)
LOW SUPPLY CURRENT: 7.8mA (V_S = +5V)
FLEXIBLE SUPPLY RANGE:
±1.5V to ±5.5V Dual Supply
+3V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON SINGLE SUPPLY
4.9V_PP OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 350V/µs
LOW INPUT VOLTAGE NOISE: 9.3nV/Hz
APPLICATIONS
- SINGLE-SUPPLY VIDEO LINE DRIVERS
- CCD IMAGING CHANNELS
- LOW-POWER ULTRASOUND
- PORTABLE CONSUMER ELECTRONICS

All other trademarks are the property of their respective owners.

HIGH BANDWIDTH: 75MHz (G = +2)
LOW SUPPLY CURRENT: 7.8mA (V_S = +5V)
FLEXIBLE SUPPLY RANGE:
±1.5V to ±5.5V Dual Supply
+3V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON SINGLE SUPPLY
4.9V_PP OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 350V/µs
LOW INPUT VOLTAGE NOISE: 9.3nV/Hz
APPLICATIONS
- SINGLE-SUPPLY VIDEO LINE DRIVERS
- CCD IMAGING CHANNELS
- LOW-POWER ULTRASOUND
- PORTABLE CONSUMER ELECTRONICS

All other trademarks are the property of their respective owners.

The OPA2832 is a dual, low-power, high-speed, fixed-gain amplifier designed to operate on a single +3V to +11V supply. Operation on ±1.5V to ±5.5V supplies is also supported. The input range extends below ground and to within 1.7V of the positive supply.

Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 60mV of the positive supply. The high output drive current and low differential gain and phase errors also make it ideal for single-supply consumer video products.

Low distortion operation is ensured by high bandwidth product (75MHz) and slew rate (350V/µs), making the OPA2832 an ideal input buffer stage to 3V and 5V CMOS converters. Unlike earlier low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.3nV/Hz input voltage noise supports wide dynamic range operation.

The OPA2832 is available in an industry-standard SO-8 package or a small MSOP-8 package. For gains other than +1, –1, or +2, consider the OPA2830.

The OPA2832 is a dual, low-power, high-speed, fixed-gain amplifier designed to operate on a single +3V to +11V supply. Operation on ±1.5V to ±5.5V supplies is also supported. The input range extends below ground and to within 1.7V of the positive supply.

Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 60mV of the positive supply. The high output drive current and low differential gain and phase errors also make it ideal for single-supply consumer video products.

Low distortion operation is ensured by high bandwidth product (75MHz) and slew rate (350V/µs), making the OPA2832 an ideal input buffer stage to 3V and 5V CMOS converters. Unlike earlier low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.3nV/Hz input voltage noise supports wide dynamic range operation.

The OPA2832 is available in an industry-standard SO-8 package or a small MSOP-8 package. For gains other than +1, –1, or +2, consider the OPA2830.

filter

尋找其它高速運算放大器 (GBW ≥ 50 MHz)

下載