首頁 放大器 運算放大器 (op amps) 精密度運算放大器 (Vos<1mV)
首頁
放大器
運算放大器 (op amps)
精密度運算放大器 (Vos<1mV)

OPA4277-SP

現行

高精密度運算放大器

立即訂購
產品規格表

OPA4277-SP

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
CDIP_SB (JDJ) 28 266.3444 mm² 35.56 x 7.49 CFP (HFR) 14 97.75 mm² 11.5 x 8.5 DIESALE (KGD) — See data sheet
  • QMLV Qualified: 5962-16209
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
  • Ultra-Low Offset Voltage: 20 µV
  • Ultra-Low Drift: ±0.15 µV/°C
  • High Open-Loop Gain: 134 dB
  • High Common-Mode Rejection: 140 dB
  • High-Power Supply Rejection: 130 dB
  • Wide Supply Range: ±2 to ±18 V
  • Low-Quiescent Current: 800 µA/Amplifier
  • Available in 14-lead CFP With Industry Standard Quad Operational Amplifier Pinout
  • QMLV Qualified: 5962-16209
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
  • Ultra-Low Offset Voltage: 20 µV
  • Ultra-Low Drift: ±0.15 µV/°C
  • High Open-Loop Gain: 134 dB
  • High Common-Mode Rejection: 140 dB
  • High-Power Supply Rejection: 130 dB
  • Wide Supply Range: ±2 to ±18 V
  • Low-Quiescent Current: 800 µA/Amplifier
  • Available in 14-lead CFP With Industry Standard Quad Operational Amplifier Pinout

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. It offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high-power supply rejection.

The OPA4277-SP operates from ±2- to ±18-V supplies with excellent performance. Unlike most operational amplifiers which are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5- to ±15-V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. It is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. It offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high-power supply rejection.

The OPA4277-SP operates from ±2- to ±18-V supplies with excellent performance. Unlike most operational amplifiers which are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5- to ±15-V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. It is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.
filter 尋找其它 精密度運算放大器 (Vos<1mV)
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet OPA4277-SP Radiation Hardened High-Precision Operational Amplifier datasheet (Rev. A) PDF | HTML 2019年 1月 9日
* Radiation & reliability report Single-Event Effects Test Report for OPA4277-SP High-Precision Operational Ampli 2018年 4月 10日
* Radiation & reliability report OPA4277-SP Total Ionizing Dose (TID) Radiation Report 2018年 3月 5日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​