OPA890

現行

具停用功能的低功耗寬頻電壓回饋運算放大器

立即訂購

產品規格表

document-pdfAcrobat Low-Power, Wideband, Voltage-Feedback Operational Amplifier w/ Disable datasheet (Rev. B) (英文)

OPA890

現行

產品規格表

立即訂購

產品詳細資料

Architecture

Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

12

GBW (typ) (MHz)

130

BW at Acl (MHz)

260

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

500

Vn at flatband (typ) (nV√Hz)

8

Vn at 1 kHz (typ) (nV√Hz)

8

Iq per channel (typ) (mA)

1.1

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

67

Input bias current (max) (pA)

1600000

Offset drift (typ) (µV/°C)

15

Iout (typ) (mA)

40

2nd harmonic (dBc)

88

3rd harmonic (dBc)

89

Frequency of harmonic distortion measurement (MHz)

1

Architecture

Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

12

GBW (typ) (MHz)

130

BW at Acl (MHz)

260

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

500

Vn at flatband (typ) (nV√Hz)

8

Vn at 1 kHz (typ) (nV√Hz)

8

Iq per channel (typ) (mA)

1.1

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Features

Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

67

Input bias current (max) (pA)

1600000

Offset drift (typ) (µV/°C)

15

Iout (typ) (mA)

40

2nd harmonic (dBc)

88

3rd harmonic (dBc)

89

Frequency of harmonic distortion measurement (MHz)

1

SOIC (D)

8

29.4 mm² 4.9 x 6

SOT-23 (DBV)

6

8.12 mm² 2.9 x 2.8

FLEXIBLE SUPPLY RANGE:
+3V to +12V Single Supply
±1.5V to ±6V Dual Supplies
UNITY-GAIN STABLE
WIDEBAND +5V OPERATION: 115MHz
(G = +2V/V)
OUTPUT VOLTAGE SWING: ±4V
HIGH SLEW RATE: 500V/µs
LOW QUIESCENT CURRENT: 1.1mA
LOW DISABLE CURRENT: 30µA
APPLICATIONS
- VIDEO LINE DRIVING
- xDSL LINE DRIVERS/RECEIVERS
- HIGH-SPEED IMAGING CHANNELS
- ADC BUFFERS
- PORTABLE INSTRUMENTS
- TRANSIMPEDANCE AMPLIFIERS
- ACTIVE FILTERS

All other trademarks are the property of their respective owners.

FLEXIBLE SUPPLY RANGE:
+3V to +12V Single Supply
±1.5V to ±6V Dual Supplies
UNITY-GAIN STABLE
WIDEBAND +5V OPERATION: 115MHz
(G = +2V/V)
OUTPUT VOLTAGE SWING: ±4V
HIGH SLEW RATE: 500V/µs
LOW QUIESCENT CURRENT: 1.1mA
LOW DISABLE CURRENT: 30µA
APPLICATIONS
- VIDEO LINE DRIVING
- xDSL LINE DRIVERS/RECEIVERS
- HIGH-SPEED IMAGING CHANNELS
- ADC BUFFERS
- PORTABLE INSTRUMENTS
- TRANSIMPEDANCE AMPLIFIERS
- ACTIVE FILTERS

All other trademarks are the property of their respective owners.

The OPA890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities provide exceptional full power bandwidth. Using a single +5V supply, the OPA890 can deliver a 1V to 4V output swing with over 35mA drive current and 220MHz bandwidth. This combination of features makes the OPA890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.

The low 1.1mA supply current of the OPA890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, operates the OPA890 normally. If pulled LOW, the OPA890 supply current drops to less than 30µA while the output goes into a high-impedance state.

The OPA890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities provide exceptional full power bandwidth. Using a single +5V supply, the OPA890 can deliver a 1V to 4V output swing with over 35mA drive current and 220MHz bandwidth. This combination of features makes the OPA890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.

The low 1.1mA supply current of the OPA890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, operates the OPA890 normally. If pulled LOW, the OPA890 supply current drops to less than 30µA while the output goes into a high-impedance state.

filter

尋找其它高速運算放大器 (GBW ≥ 50 MHz)

下載