產品詳細資料

Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type Single-Wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type Single-Wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
VSSOP (DGK) 8 14.7 mm² 3 x 4.9 WSON (NGR) 8 6.25 mm² 2.5 x 2.5
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

下載 觀看有字幕稿的影片 影片

索取更多資訊

提供 NIST 校準文件。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TMP1827 現行 SHA-256 驗證器和 2Kbit EEPROM,整合式 ±0.2°C 溫度感測器與 1-Wire® 通訊協定相容 Pin-to-pin, same accuracy temperature sensor, with 2-kbit EEPROM and SHA-256-HMAC authentication
功能與所比較的裝置相似
LMT01 現行 具有脈衝串介面的 0.5°C 準確 2 接腳溫度感測器 Pulse train, two-pin through hole or surface mount with 0.5°C accuracy
TMP107 現行 具有菊輪鍊 UART、EEPROM 與警示功能的 ±0.4°C 溫度感測器 UART daisy chain with 0.4°C accuracy
TMP117 現行 0.1°C 數位溫度感測器、48 位元 EEPROM、PT100/PT1000 RTD 替代品 I²C bus with 0.1°C accuracy

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet TMP1826 2-Kbit EEPROM, With Integrated ±0.2°C Temperature Sensor, Compatible With 1-Wire® Protocol datasheet (Rev. D) PDF | HTML 2025年 1月 17日
Application note How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) PDF | HTML 2025年 1月 21日
Application note Implementing Enumeration for 1-Wire® Protocol with TMP1826 and TM4C129x Microcontrollers (Rev. E) PDF | HTML 2025年 1月 21日
Application brief Replace External Memory for Module Identification With TMP1826 Embedded EEPROM (Rev. A) PDF | HTML 2025年 1月 21日
Functional safety information TMP1826 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 2023年 7月 20日
Application note Implementing Host Controller for TMP1826 & TMP1827 Single-Wire Temp. Sensor PDF | HTML 2022年 11月 3日
Technical article 3 tips to optimize data reliability with sensors in real-time control systems PDF | HTML 2022年 8月 9日
Application note RTD Alternative Measurement Methods in Real-Time Control Applications (Rev. A) PDF | HTML 2022年 6月 17日
EVM User's guide TMP1826EVM User's Guide PDF | HTML 2022年 1月 25日
Technical article How accurate sensing in HVAC systems improves efficiency and saves consumers money PDF | HTML 2021年 1月 26日
Technical article Interface to sensors in seconds with ASC Studio PDF | HTML 2020年 11月 12日
Technical article Getting the most out of your power stage at the full temperature range – part 2 PDF | HTML 2019年 9月 12日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMP1827EVM — 適用於單線數位溫度感測器的 TMP1827 評估模組

TMP1827 為具有含雜湊訊息認證編碼 (HMAC) 和 2-Kbit EEPROM 之整合式安全雜湊演算法 (SHA) 256 位元的高準確度單線相容數位輸出溫度感測器。TMP1827 在 -55°C 至 150°C 的溫度範圍中可提供 ±0.3°C 的高準確度

TMP1827EVM 旨在提供快速設定以評估 TMP182x,並深入熟悉產品至各位元暫存器等級。印刷電路板 (PCB) 穿孔也可讓使用者將 TMP1827 與 USB 介面分離。

使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
WSON (NGR) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片