首頁 感測器 溫度感測器 溫度開關
首頁
感測器
溫度感測器
溫度開關

TMP392

現行

TMP392 雙通道 (過熱和溫熱) 可編程電阻溫度開關

立即訂購
產品規格表

TMP392

現行
產品規格表 立即訂購

產品詳細資料

Setpoint type Resistor Programmable Setpoint value (°C) 30 to 105, 30 to 124 Operating temperature range (°C) -55 to 130 Accuracy over temp range (max) (°C) 1.5 Output type Open drain Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 5.5 Supply current (typ) (µA) 0.5 Number of comparator channels 2 Features Built-in hysteresis Rating Catalog Interface type Switch
Setpoint type Resistor Programmable Setpoint value (°C) 30 to 105, 30 to 124 Operating temperature range (°C) -55 to 130 Accuracy over temp range (max) (°C) 1.5 Output type Open drain Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 5.5 Supply current (typ) (µA) 0.5 Number of comparator channels 2 Features Built-in hysteresis Rating Catalog Interface type Switch
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • Resistor programmable temperature trip points and hysteresis options
    • Resistor tolerances contribute zero error
    • Hysteresis options: 5°C, 10°C and 20°C
  • Dual outputs for overtemperature detection
    • Channel A (overtemperature-hot): +30 to +124°C, 2°C steps
    • Channel B (overtemperature-warm): +30 to +105°C, 5°C steps
  • Accuracy level options (maximum at +30°C to +130°C):
    • A2 Level: ±3.0°C (±1.5°C from +30°C to +70°C)
    • A3 Level: ±3.5°C (±2.0°C from +30°C to +70°C)
  • Ultra-low power consumption: 0.5 µA typical at 25°C
  • Supply voltage: 1.62 to 5.5 V
  • Open-drain outputs
  • Trip test function enables in-system testing
  • Available in a SOT-563 (1.60-mm × 1.20-mm),
    6-pin package
  • Resistor programmable temperature trip points and hysteresis options
    • Resistor tolerances contribute zero error
    • Hysteresis options: 5°C, 10°C and 20°C
  • Dual outputs for overtemperature detection
    • Channel A (overtemperature-hot): +30 to +124°C, 2°C steps
    • Channel B (overtemperature-warm): +30 to +105°C, 5°C steps
  • Accuracy level options (maximum at +30°C to +130°C):
    • A2 Level: ±3.0°C (±1.5°C from +30°C to +70°C)
    • A3 Level: ±3.5°C (±2.0°C from +30°C to +70°C)
  • Ultra-low power consumption: 0.5 µA typical at 25°C
  • Supply voltage: 1.62 to 5.5 V
  • Open-drain outputs
  • Trip test function enables in-system testing
  • Available in a SOT-563 (1.60-mm × 1.20-mm),
    6-pin package

The TMP392 device is part of a family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from 30°C to 130°C. The TMP392 offers dual overtemperature (hot and warm) detection. The trip temperatures (TTRIP) and thermal hysteresis (THYST) options are programmed by two E96-series resistors (1% tolerance) on the SETA and SETB pins. Channel A resistors can range from 1.05 KΩ to 909 KΩ, representing one of 48 unique values. Channel B resistors can range from 10.5 KΩ to 909 KΩ

The value of the resistor to ground on SETA input sets the TTRIP threshold of Channel A. The value of the resistor to ground on SETB input sets the TTRIP threshold of Channel B, as well as the THYST options of 5°C, or 10°C for both channels, to prevent undesired digital output switching. When the SETB input is connected to ground, Channel A operates with 20°C hysteresis. Resistors accuracy has no impact to TTRIP accuracy.

To enable customer board-level manufacturing, the TMP392 supports a trip test function where the digital outputs are activated by exercising the SETA or SETB pin.

The TMP392 device is part of a family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from 30°C to 130°C. The TMP392 offers dual overtemperature (hot and warm) detection. The trip temperatures (TTRIP) and thermal hysteresis (THYST) options are programmed by two E96-series resistors (1% tolerance) on the SETA and SETB pins. Channel A resistors can range from 1.05 KΩ to 909 KΩ, representing one of 48 unique values. Channel B resistors can range from 10.5 KΩ to 909 KΩ

The value of the resistor to ground on SETA input sets the TTRIP threshold of Channel A. The value of the resistor to ground on SETB input sets the TTRIP threshold of Channel B, as well as the THYST options of 5°C, or 10°C for both channels, to prevent undesired digital output switching. When the SETB input is connected to ground, Channel A operates with 20°C hysteresis. Resistors accuracy has no impact to TTRIP accuracy.

To enable customer board-level manufacturing, the TMP392 supports a trip test function where the digital outputs are activated by exercising the SETA or SETB pin.

filter 尋找其它 溫度開關
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TMP392 Ultra-Small, Dual-Channel (Hot and Warm Trip), 0.5-µA, Resistor-Programmable Temperature Switch datasheet PDF | HTML 2019年 11月 15日
Application note System Optimization Through Integrated Solutions for Temp. Threshold Detection PDF | HTML 2021年 7月 13日
Certificate TMP392EVM EU Declaration of Conformity (DoC) 2020年 5月 6日
EVM User's guide TMP392EVM User's Guide 2019年 11月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMP390EVM — TMP390 雙跳閘電阻器可編程溫度開關評估模組

The TMP390 evaluation module (EVM) is a plug-and-play system to test and evaluate the TMP390 analog temperature switch. TMP390EVM features resistor-programmable inputs for the dual-channel switch with both hot and cold trip settings.

The EVM can be plugged into a USB port to supply power to the (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

TMP392EVM — TMP392 雙跳閘電阻器可編程溫度開關評估模組

The TMP392 evaluation kit is a plug and play system to test and evaluate the TMP392 analog temperature switch. The EVM features resistor-programmable inputs for the dual-channel switch with both hot and warm trip settings to protect two different over-temperature conditions or be used as an (...)
使用指南: PDF
TI.com 無法提供
參考設計

TIDA-050059 — 適用於固態繼電器的過電流與過熱防護參考設計

此參考設計顯示如何實現固態繼電器的過電流與過熱防護。參考設計配備 TPSI3050-Q1 5-kVRMS 強化型隔離開關驅動器。TPSI3050-Q1 裝置整合了層壓變壓器，在將訊號和電源傳輸至二次側時實現隔離。如此就不需要任何隔離偏壓電源。此外，TPSI3050-Q1 裝置可爲位於高電壓 (HV) 側的外部電路提供電源。此參考設計最多可支援 500-VDC 或 350-VAC 切換，具最大值為 4-A 負載條件。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片