AM26LV32E-EP

Name: AM26LV32E-EP
Brand: TI
SKU: AM26LV32E-EP
Price: 2.393 USD

AKTIV

Verbessertes Produkt – Vierfach-Differential-Leitungsempfänger, niedrige Spannung, Highspeed, ESD-Sc

Jetzt bestellen

Datenblatt

document-pdfAcrobat Low-Voltage High-Speed Quadruple Differential Line Reciever. datasheet (Rev. A) (Englisch)

AM26LV32E-EP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

3.3

Signaling rate (max) (Mbps)

32

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-14 to 14

Common-mode range (V)

-7 to 7

Number of nodes

32

Features

IEC ESD protection

Isolated

No

Supply current (max) (µA)

17000

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Number of receivers

4

Number of transmitters

0

Duplex

Half

Supply voltage (nom) (V)

3.3

Signaling rate (max) (Mbps)

32

IEC 61000-4-2 contact (±V)

8000

Fault protection (V)

-14 to 14

Common-mode range (V)

-7 to 7

Number of nodes

32

Features

IEC ESD protection

Isolated

No

Supply current (max) (µA)

17000

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

SOIC (D)

16

59.4 mm² 9.9 x 6

Meets or Exceeds Standard TIA/EIA-422-B and ITU Recommendation V.11
Operates From a Single 3.3-V Power Supply
ESD Protection for RS422 Bus Pins
- ±15-kV Human-Body Model (HBM)
- ±8-kV IEC61000-4-2, Contact Discharge
- ±15-kV IEC61000-4-2, Air-Gap Discharge
Switching Rates up to 32 MHz
Low Power Dissipation: 27 mW Typ
Open-Circuit, Short-Circuit, and Terminated Fail-Safe
±7-V Common-Mode Input Voltage Range With ±200-mV Sensitivity
Accepts 5-V Logic Inputs With 3.3-V Supply (Enable Inputs)
Input Hysteresis: 35 mV Typ
Pin-to-Pin Compatible With AM26C32, AM26LS32
I_off Supports Partial-Power-Down Mode Operation

⁽¹⁾ Additional temperature ranges are available – contact factory

Meets or Exceeds Standard TIA/EIA-422-B and ITU Recommendation V.11
Operates From a Single 3.3-V Power Supply
ESD Protection for RS422 Bus Pins
- ±15-kV Human-Body Model (HBM)
- ±8-kV IEC61000-4-2, Contact Discharge
- ±15-kV IEC61000-4-2, Air-Gap Discharge
Switching Rates up to 32 MHz
Low Power Dissipation: 27 mW Typ
Open-Circuit, Short-Circuit, and Terminated Fail-Safe
±7-V Common-Mode Input Voltage Range With ±200-mV Sensitivity
Accepts 5-V Logic Inputs With 3.3-V Supply (Enable Inputs)
Input Hysteresis: 35 mV Typ
Pin-to-Pin Compatible With AM26C32, AM26LS32
I_off Supports Partial-Power-Down Mode Operation

⁽¹⁾ Additional temperature ranges are available – contact factory

The AM26LV32E consists of quadruple differential line receivers with 3-state outputs. These differential receivers have ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection for RS422 bus pins.

This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system.

The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe, and terminated fail-safe, a high state is produced at the respective output.

This device is supported for partial-power-down applications using I_off. I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The AM26LV32EM is characterized for operation from –55°C to 125°C.

The AM26LV32E consists of quadruple differential line receivers with 3-state outputs. These differential receivers have ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection for RS422 bus pins.

This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system.

The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe, and terminated fail-safe, a high state is produced at the respective output.

This device is supported for partial-power-down applications using I_off. I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The AM26LV32EM is characterized for operation from –55°C to 125°C.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 4

	Typ	Titel		Datum
*	Data sheet	Low-Voltage High-Speed Quadruple Differential Line Reciever. datasheet (Rev. A)		10 Jul 2013
*	VID	AM26LV32E-EP VID V6209602		21 Jun 2016
*	Radiation & reliability report	AM26LV32ESDREP Reliability Report		19 Okt 2011
	Application note	Debugging Sitara AM2x Microcontrollers	PDF \| HTML	24 Okt 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

AM26LV32E IBIS Model (Rev. A)

SLLM218A.ZIP (21 KB) - IBIS Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
SOIC (D)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

AM26LV32E-EP

Verbessertes Produkt – Vierfach-Differential-Leitungsempfänger, niedrige Spannung, Highspeed, ESD-Sc

AM26LV32E-EP

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

AM26LV32E IBIS Model (Rev. A)

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos