Startseite Schnittstelle LVDS-, M-LVDS- und PECL-ICs
Startseite
Schnittstelle
LVDS-, M-LVDS- und PECL-ICs

EQ50F100

LETZTE KAUFMÖGLICHKEIT

Backplane-Equalizer für 1 bis 6,25 Gbit/s.

Jetzt bestellen
Datenblatt

EQ50F100

LETZTE KAUFMÖGLICHKEIT
Datenblatt Jetzt bestellen

Produktdetails

Function Equalizer Protocols CML Number of transmitters 1 Number of receivers 1 Supply voltage (V) 1.8 Signaling rate (Mbps) 6250 Input signal CML Output signal CML Rating Catalog Operating temperature range (°C) -40 to 85
Function Equalizer Protocols CML Number of transmitters 1 Number of receivers 1 Supply voltage (V) 1.8 Signaling rate (Mbps) 6250 Input signal CML Output signal CML Rating Catalog Operating temperature range (°C) -40 to 85
WSON (NGG) 6 9 mm² 3 x 3
  • Recovers 6.25 Gbps signals after 30" of FR4
  • Single 1.8V power supply
  • Low power consumption: 85mW
  • Equalize up to 20dB loss at 2.5 GHz
  • 35 ps residual deterministic jitter at 5 Gbps
  • On-chip CML terminations
  • Small 3 mm x 3 mm 6-pin leadless LLP package
  • Recovers 6.25 Gbps signals after 30" of FR4
  • Single 1.8V power supply
  • Low power consumption: 85mW
  • Equalize up to 20dB loss at 2.5 GHz
  • 35 ps residual deterministic jitter at 5 Gbps
  • On-chip CML terminations
  • Small 3 mm x 3 mm 6-pin leadless LLP package

The EQ50F100 is a equalizer designed to compensate transmission medium losses and reduce the medium-induced deterministic jitter. It is optimized for operation from 1Gbps to 6.25Gbps, on printed circuit backplane for up to 30" of FR4 striplines with backplane connectors at both ends. It is code independent, and functioning equally well for short run length, balanced codes such as 8b/10b, commonly used in multiplexed 1.25 Gbps Ethernet Systems.

The equalizer uses differential CML inputs and outputs with feed-through pin-outs, mounted in a 3 mm x 3 mm 6-pin leadless LLP package. It is powered from single 1.8V supply and consumes 85 mW.

The EQ50F100 is a equalizer designed to compensate transmission medium losses and reduce the medium-induced deterministic jitter. It is optimized for operation from 1Gbps to 6.25Gbps, on printed circuit backplane for up to 30" of FR4 striplines with backplane connectors at both ends. It is code independent, and functioning equally well for short run length, balanced codes such as 8b/10b, commonly used in multiplexed 1.25 Gbps Ethernet Systems.

The equalizer uses differential CML inputs and outputs with feed-through pin-outs, mounted in a 3 mm x 3 mm 6-pin leadless LLP package. It is powered from single 1.8V supply and consumes 85 mW.
filter Andere LVDS-, M-LVDS- und PECL-ICs suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet EQ50F100 1Gbps - 6.25 Gbps Backplane Equalizer datasheet (Rev. D) 14 Apr 2005

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort