Startseite Motortreiber Treiber für bürstenlose Gleichstrommotoren (BLDC) BLDC-Treiber mit integrierter Steuerung
Startseite
Motortreiber
Treiber für bürstenlose Gleichstrommotoren (BLDC)
BLDC-Treiber mit integrierter Steuerung
NEU

MCT8316A-Q1

AKTIV

3-Phasen-BLDC-Motortreiber, max. 40 V, 8 A Spitzenstrom, Trapezregelung ohne Sensor, für die Automob

Jetzt bestellen
Datenblatt

MCT8316A-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Architecture Integrated FET Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 120 or 150 degree modulation for improved acoustic performance, Active Demag to reduce power losses, Code-free high speed sensored trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Integrated FET Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 120 or 150 degree modulation for improved acoustic performance, Active Demag to reduce power losses, Code-free high speed sensored trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports upto 3kHz (electrical frequency)
    • Very fast startup time (<50ms)
    • Fast Deceleration (<150ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Active Demagnetization to reduce power losses
    • Configurable motor startup and stop options
    • Optional closed loop speed control
    • Anti-voltage surge protections prevents overvoltage
    • Variable monitoring through DACOUT
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • 95mΩ RDS(ON) (HS + LS) at TA = 25°C
  • Low power sleep mode
    • 3µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 100kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistor
  • Built-in 3.3V ±5%, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (5 different types)
    • Overcurrent protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports upto 3kHz (electrical frequency)
    • Very fast startup time (<50ms)
    • Fast Deceleration (<150ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Active Demagnetization to reduce power losses
    • Configurable motor startup and stop options
    • Optional closed loop speed control
    • Anti-voltage surge protections prevents overvoltage
    • Variable monitoring through DACOUT
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • 95mΩ RDS(ON) (HS + LS) at TA = 25°C
  • Low power sleep mode
    • 3µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 100kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistor
  • Built-in 3.3V ±5%, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (5 different types)
    • Overcurrent protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCT8316A-Q1 provides a single-chip, code-free sensorless trapezoidal device for customers requiring high speed operation (up to 3kHz electrical) or very fast startup time (<50ms) for 12 to 24V brushless-DC motors up to 8A peak current. The MCT8316A-Q1 integrates three 1/2-H bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side). Power management features of an adjustable buck regulator and LDO generate the 3.3V or 5.0V voltage rails for the device and can be used to power external circuits.

Sensorless trapezoidal control is highly configurable ranging from motor start-up behavior to closed loop operation through register settings. These settings can be saved in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8316A-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCT8316A-Q1 provides a single-chip, code-free sensorless trapezoidal device for customers requiring high speed operation (up to 3kHz electrical) or very fast startup time (<50ms) for 12 to 24V brushless-DC motors up to 8A peak current. The MCT8316A-Q1 integrates three 1/2-H bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side). Power management features of an adjustable buck regulator and LDO generate the 3.3V or 5.0V voltage rails for the device and can be used to power external circuits.

Sensorless trapezoidal control is highly configurable ranging from motor start-up behavior to closed loop operation through register settings. These settings can be saved in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8316A-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

filter Andere BLDC-Treiber mit integrierter Steuerung suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet MCT8316A-Q1 High Speed Sensorless Trapezoidal Control Integrated FET BLDC Driver datasheet PDF | HTML 08 Mai 2024
Application brief MCx8316x for Vacuum Robot Applications PDF | HTML 09 Sep 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

MCT8316AEVM — Evaluierungsmodul MCT8316 für dreiphasigen sensorlosen trapezförmigen integriertem MOSFET BLDC-Motor

Der MCT8316 verfügt über drei integrierte MOSFET-Halb-H-Brücken-Treiber zur sensorlosen Trapezsteuerung eines dreiphasigen bürstenlosen Gleichstrommotors (BLDC) für 4,5 V bis 35 V, 8 A Spitzenstromansteuerung. Der MCx8316 verfügt über einen integrierten Abwärtsregler, der 200 mA mit (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Berechnungstool

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
BLDC-Treiber
DRV8311 — Max. 24 V abs., 3 bis 20 V, dreiphasiger bürstenloser Gleichstrom-Motortreiber mit integrierten FETs DRV8316 — 3-Phasen-Motortreiber mit 8-A-Peak für max. 40 V mit integrierter Strommessung und integrierten FETs DRV8316-Q1 — 40-V-Drei-Phasen-Motortreiber, max. 8 A Spitze und integrierter Strommessung (Automobilindustrie) DRV8316C — 3-Phasen-Motortreiber mit 40 V max. 8 A Spitze, integrierter Strommessung, FETs und verbesserten CSA DRV8316C-Q1 — 40-V-Drei-Phasen-Motortreiber, max. 8 A Spitze und integrierter Strommessung (Automobilindustrie) DRV8317 — 24-V-Drei-Phasen-Motortreiber, max. 5 A Spitze und integrierte FETs und Strommessung
BLDC-Treiber mit integrierter Steuerung
MCF8316A — 3-phasiger BLDC-Motortreiber, max. 40 V, 8 A Spitze, sensorlose FOC-Steuerung MCF8316C-Q1 — 3-phasiger BLDC-Motortreiber für die Automobilindustrie, max. 40 V, 8 A Spitzenstrom, sensorlose fel MCT8316A — 3-phasiger BLDC-Motortreiber, max. 40 V, 8 A Spitzenstrom, sensorlose Trapezregelung MCT8316A-Q1 — 3-Phasen-BLDC-Motortreiber, max. 40 V, 8 A Spitzenstrom, Trapezregelung ohne Sensor, für die Automob MCT8316Z — 3-phasiger BLDC-Motortreiber, max. 40 V, 8 A Spitze, Trapezregelung mit Sensor MCT8316Z-Q1 — 3-Phasen-BLDC-Motortreiber, max. 40 V, 8 A Spitzenstrom, Trapezregelung mit Sensor, für die Automobi
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RGF) 40 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos