Startseite Verstärker Verstärker für Spezialfunktionen Leitungstreiber
Startseite
Verstärker
Verstärker für Spezialfunktionen
Leitungstreiber

OPA2670

AKTIV

VDSL2- und PLC-Leitungstreiber, einzelner Port, hoher Ausgangsstrom, mit Leistungssteuerung

Jetzt bestellen
Datenblatt

OPA2670

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 Architecture Current FB, DSL Line Driver, PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 BW at Acl (MHz) 420 Acl, min spec gain (V/V) 1 Vn at flatband (typ) (nV√Hz) 3.6 Vn at 1 kHz (typ) (nV√Hz) 6 Iq per channel (typ) (mA) 30.5 Vos (offset voltage at 25°C) (max) (mV) 6 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 56 Input bias current (max) (pA) 24000000 Offset drift (typ) (µV/°C) 8 GBW (typ) (MHz) 1400 Iout (typ) (mA) 700 2nd harmonic (dBc) 71 3rd harmonic (dBc) 80 Frequency of harmonic distortion measurement (MHz) 10
Number of channels 1 Architecture Current FB, DSL Line Driver, PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 BW at Acl (MHz) 420 Acl, min spec gain (V/V) 1 Vn at flatband (typ) (nV√Hz) 3.6 Vn at 1 kHz (typ) (nV√Hz) 6 Iq per channel (typ) (mA) 30.5 Vos (offset voltage at 25°C) (max) (mV) 6 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 56 Input bias current (max) (pA) 24000000 Offset drift (typ) (µV/°C) 8 GBW (typ) (MHz) 1400 Iout (typ) (mA) 700 2nd harmonic (dBc) 71 3rd harmonic (dBc) 80 Frequency of harmonic distortion measurement (MHz) 10
  • WIDEBAND +12V OPERATION:
    420MHz (G = +5V/V)
  • HIGH OUTPUT CURRENT: 700mA
  • OUTPUT VOLTAGE SWING: 9.4VPP into 10 Single-Ended Load
  • HIGH DIFFERENTIAL SLEW RATE: 5000V/µs
  • LOW SUPPLY CURRENT: 30.5mA
  • FLEXIBLE POWER CONTROL
  • APPLICATIONS
    • POWER LINE MODEM
    • xDSL LINE DRIVERS
    • CABLE MODEM DRIVERS
    • BROADBAND VIDEO LINE DRIVERS
    • ARB LINE DRIVERS

PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
  • WIDEBAND +12V OPERATION:
    420MHz (G = +5V/V)
  • HIGH OUTPUT CURRENT: 700mA
  • OUTPUT VOLTAGE SWING: 9.4VPP into 10 Single-Ended Load
  • HIGH DIFFERENTIAL SLEW RATE: 5000V/µs
  • LOW SUPPLY CURRENT: 30.5mA
  • FLEXIBLE POWER CONTROL
  • APPLICATIONS
    • POWER LINE MODEM
    • xDSL LINE DRIVERS
    • CABLE MODEM DRIVERS
    • BROADBAND VIDEO LINE DRIVERS
    • ARB LINE DRIVERS

PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The OPA2670 provides the high output current and low distortion required in emerging xDSL and Power Line Modem driver applications. Operating on a single +12V supply, the OPA2670 consumes a low 30.5mA quiescent current to deliver a very high 700mA output current. This output current supports even the most demanding xDSL requirements with greater than 450mA minimum output current (+25°C minimum value) with low harmonic distortion. Differential driver applications deliver less than –71dBc distortion at the peak upstream power levels of full-rate ADSL. The high 320MHz bandwidth also supports the most demanding VDSL2 line driver requirements.

Power control features are included to allow system power to be minimized. Two logic control lines allow four quiescent power settings, including full power, 66% power, 33% power, and shutdown.

The OPA2670 provides the high output current and low distortion required in emerging xDSL and Power Line Modem driver applications. Operating on a single +12V supply, the OPA2670 consumes a low 30.5mA quiescent current to deliver a very high 700mA output current. This output current supports even the most demanding xDSL requirements with greater than 450mA minimum output current (+25°C minimum value) with low harmonic distortion. Differential driver applications deliver less than –71dBc distortion at the peak upstream power levels of full-rate ADSL. The high 320MHz bandwidth also supports the most demanding VDSL2 line driver requirements.

Power control features are included to allow system power to be minimized. Two logic control lines allow four quiescent power settings, including full power, 66% power, 33% power, and shutdown.
filter Andere Leitungstreiber suchen
Herunterladen

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
OPA2675 AKTIV Zweikanal-Breitband-Transimpedanzverstärker mit hohem Ausgangsstrom Lower noise (2.4nV√Hz), lower IQ (16.5mA) and higher output current (1A)
Ähnliche Funktionalität wie verglichener Baustein
THS6222 AKTIV Differenzieller Breitband-PLC- und HPLC-Leitungstreiber mit Gleichtaktpuffer Single port line driver for power line communication and DSL applications

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet Dual Wideband, High Output Current Operational Amplifier with Power Control datasheet 19 Aug 2010

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos