Startseite Schnittstelle RS-232-Transceiver
Startseite
Schnittstelle
RS-232-Transceiver

SN75LV4737A

AKTIV

Mehrkanaliger RS-232-Leitungstreiber/-empfänger, 3,3 bis 5 V

Jetzt bestellen
Datenblatt

SN75LV4737A

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Drivers per package 3 Receivers per package 5 Logic voltage (min) (V) 3.3 Data rate (max) (Mbps) 0.128 Main supply voltage (nom) (V) 3.3, 5 ESD HBM (kV) 4 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 5.5
Drivers per package 3 Receivers per package 5 Logic voltage (min) (V) 3.3 Data rate (max) (Mbps) 0.128 Main supply voltage (nom) (V) 3.3, 5 ESD HBM (kV) 4 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 5.5
SSOP (DB) 28 79.56 mm² 10.2 x 7.8
  • Single-Chip and Single-Supply Interface for IBM PC/ATTM Serial Port
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.11 Standards
  • Operates With 3.3-V or 5-V Supplies
  • One Receiver Remains Active During Standby (Wake-up Mode)
  • Designed to Operate at 128 kbit/s Over a 3-m Cable
  • Low Standby Current...5 uA Max
  • ESD Protection on RS-232 Pins Meets or Exceeds 4 kV (HBM) and 1.5 kV (HBM) on All Pins Per MIL-STD-883, Method 3015
  • External Capacitors...0.1 uF
  • (VCC = 3.3 V...Five External Capacitors)
  • (VCC = 5 V...Four External Capacitors)
  • Accepts 5-V Logic Input With 3.3-V Supply
  • Applications
    • RS-232 Interface
    • Battery-Powered Systems, PDAs
    • Notebook, Laptop, and Palmtop PCs
    • External Modems and Hand-Held Terminals
  • Packaged in Shrink Small-Outline Package

Patent-pending design

IBM and PC/AT are trademarks of International Business Machines Corporation.
  • Single-Chip and Single-Supply Interface for IBM PC/ATTM Serial Port
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.11 Standards
  • Operates With 3.3-V or 5-V Supplies
  • One Receiver Remains Active During Standby (Wake-up Mode)
  • Designed to Operate at 128 kbit/s Over a 3-m Cable
  • Low Standby Current...5 uA Max
  • ESD Protection on RS-232 Pins Meets or Exceeds 4 kV (HBM) and 1.5 kV (HBM) on All Pins Per MIL-STD-883, Method 3015
  • External Capacitors...0.1 uF
  • (VCC = 3.3 V...Five External Capacitors)
  • (VCC = 5 V...Four External Capacitors)
  • Accepts 5-V Logic Input With 3.3-V Supply
  • Applications
    • RS-232 Interface
    • Battery-Powered Systems, PDAs
    • Notebook, Laptop, and Palmtop PCs
    • External Modems and Hand-Held Terminals
  • Packaged in Shrink Small-Outline Package

Patent-pending design

IBM and PC/AT are trademarks of International Business Machines Corporation.

The SN75LV4737A consists of three line drivers, five line receivers, and a charge-pump circuit. It provides the electrical interface between an asynchronous communication controller and the serial-port connector, and meets the requirements of TIA/EIA-232-F. This combination of drivers and receivers matches those needed for the typical serial port used in an IBM PC/AT or compatibles. The charge pump and five small external capacitors allow operation from a single 3.3-V supply, and four capacitors allow operation from a 5-V supply.

The device has flexible control options for power management when the serial port is inactive. A common disable for all of the drivers and receivers is provided with the active-high STBY input. The active-low EN\ input is an enable for one receiver to implement a wake-up feature for the serial port. All the logic inputs can accept signals from controllers operating from a 5-V supply, even though the SN75LV4737A is operating from 3.3 V.

The SN75LV4737A is characterized for operation over the temperature range of 0°C to 70°C.

The SN75LV4737A consists of three line drivers, five line receivers, and a charge-pump circuit. It provides the electrical interface between an asynchronous communication controller and the serial-port connector, and meets the requirements of TIA/EIA-232-F. This combination of drivers and receivers matches those needed for the typical serial port used in an IBM PC/AT or compatibles. The charge pump and five small external capacitors allow operation from a single 3.3-V supply, and four capacitors allow operation from a 5-V supply.

The device has flexible control options for power management when the serial port is inactive. A common disable for all of the drivers and receivers is provided with the active-high STBY input. The active-low EN\ input is an enable for one receiver to implement a wake-up feature for the serial port. All the logic inputs can accept signals from controllers operating from a 5-V supply, even though the SN75LV4737A is operating from 3.3 V.

The SN75LV4737A is characterized for operation over the temperature range of 0°C to 70°C.
filter Andere RS-232-Transceiver suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
TRS3243E AKTIV 3- bis 5,5-V-Mehrfachkanal-RS-232-Leitungstreiber/-Empfänger mit 500 Kbit/s und +/-15-k Faster data rate, wider operating temperature range, and provides auto-powerdown feature.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet 3.3-V/5-V Multichannel RS-232 Line Driver/Receiver datasheet (Rev. D) 23 Feb 2000

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SSOP (DB) 28 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos