THS6022

AKTIV

Zweifach-Differenz-DSL und PLC-Leitungstreiber, 250 mA

Jetzt bestellen

Datenblatt

document-pdfAcrobat 250-mA Dual Differential Line Driver datasheet (Rev. D) (Englisch)

THS6022

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

2

Architecture

DSL Line Driver, PLC Line Driver

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

9

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

33

BW at Acl (MHz)

210

Acl, min spec gain (V/V)

1

Vn at flatband (typ) (nV√Hz)

1.7

Vn at 1 kHz (typ) (nV√Hz)

1.8

Iq per channel (typ) (mA)

7.2

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

73

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

20

GBW (typ) (MHz)

210

Iout (typ) (mA)

250

2nd harmonic (dBc)

76

3rd harmonic (dBc)

80

Frequency of harmonic distortion measurement (MHz)

1

Number of channels

2

Architecture

DSL Line Driver, PLC Line Driver

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

9

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

33

BW at Acl (MHz)

210

Acl, min spec gain (V/V)

1

Vn at flatband (typ) (nV√Hz)

1.7

Vn at 1 kHz (typ) (nV√Hz)

1.8

Iq per channel (typ) (mA)

7.2

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

73

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

20

GBW (typ) (MHz)

210

Iout (typ) (mA)

250

2nd harmonic (dBc)

76

3rd harmonic (dBc)

80

Frequency of harmonic distortion measurement (MHz)

1

HTSSOP (PWP)

14

32 mm² 5 x 6.4

ADSL, HDSL and VDSL Differential Line Driver
200-mA Output Current Minimum Into 50- Load
High Speed
- 210-MHz Bandwidth (-3-dB) at 50- Load
- 1900-V/µs Slew Rate, G = 5
Low Distortion
- -69-dB Third-Order Harmonic Distortion at f = 1 MHz, 50- Load, and V_O(PP) = 20 V
Independent Power Supplies for Low Crosstalk
Wide Supply Range ±5 V to ±15 V
Thermal-Shutdown and Short-Circuit Protection
Evaluation Module Available

PowerPAD, MicroStar Junior are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

ADSL, HDSL and VDSL Differential Line Driver
200-mA Output Current Minimum Into 50- Load
High Speed
- 210-MHz Bandwidth (-3-dB) at 50- Load
- 1900-V/µs Slew Rate, G = 5
Low Distortion
- -69-dB Third-Order Harmonic Distortion at f = 1 MHz, 50- Load, and V_O(PP) = 20 V
Independent Power Supplies for Low Crosstalk
Wide Supply Range ±5 V to ±15 V
Thermal-Shutdown and Short-Circuit Protection
Evaluation Module Available

PowerPAD, MicroStar Junior are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

The THS6022 contains two high-speed drivers capable of providing 200-mA output current (minimum) into a 50- load. These drivers can be configured differentially to drive a 50-V p-p output signal over low-impedance lines. The drivers are current feedback amplifiers, designed for the high slew rates necessary to support low total harmonic distortion (THD) in xDSL applications. The THS6022 is ideally suited for asymmetrical digital subscriber line (ADSL) at the remote terminal, high-data-rate digital subscriber line (HDSL), and very high-data-rate digital subscribe line (VDSL), where it supports the high-peak voltage and current requirements of these applications. Separate power supply connections for each driver are provided to minimize crosstalk.

The THS6022 is packaged in the patented PowerPAD™ package. This package provides outstanding thermal characteristics in a small-footprint package that is fully compatible with automated surface-mount assembly procedures. The exposed thermal pad on the underside of the package is in direct contact with the die. By simply soldering the pad to the PWB copper and using other thermal outlets, the heat is conducted away from the junction.

The THS6022 contains two high-speed drivers capable of providing 200-mA output current (minimum) into a 50- load. These drivers can be configured differentially to drive a 50-V p-p output signal over low-impedance lines. The drivers are current feedback amplifiers, designed for the high slew rates necessary to support low total harmonic distortion (THD) in xDSL applications. The THS6022 is ideally suited for asymmetrical digital subscriber line (ADSL) at the remote terminal, high-data-rate digital subscriber line (HDSL), and very high-data-rate digital subscribe line (VDSL), where it supports the high-peak voltage and current requirements of these applications. Separate power supply connections for each driver are provided to minimize crosstalk.

The THS6022 is packaged in the patented PowerPAD™ package. This package provides outstanding thermal characteristics in a small-footprint package that is fully compatible with automated surface-mount assembly procedures. The exposed thermal pad on the underside of the package is in direct contact with the die. By simply soldering the pad to the PWB copper and using other thermal outlets, the heat is conducted away from the junction.

filter

Andere Leitungstreiber suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 6

	Typ	Titel	Datum
*	Data sheet	250-mA Dual Differential Line Driver datasheet (Rev. D)	27 Jul 2007
	Application note	Precision Sum Circuit Support Hi Output Current Multiple AFEs in Ultasound App	20 Nov 2017
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	28 Mär 2017
	Application note	Noise Analysis for High Speed Op Amps (Rev. A)	17 Jan 2005
	Application note	Active Output Impedance for ADSL Line Drivers	26 Nov 2002
	User guide	THS6022 EVM User's Guide	19 Nov 1998

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

THS6022 PSpice Model (Rev. B)

SLOJ010B.ZIP (39 KB) - PSpice Model

Herunterladen

Simulationsmodell

THS6022 TINA-TI Reference Design (Rev. B)

SLAC102B.TSC (104 KB) - TINA-TI Reference Design

Herunterladen

Simulationsmodell

THS6022 TINA-TI Spice Model (Rev. A)

SLAM031A.ZIP (4 KB) - TINA-TI Spice Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP)	14	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

THS6022

Zweifach-Differenz-DSL und PLC-Leitungstreiber, 250 mA

THS6022

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

THS6022 PSpice Model (Rev. B)

THS6022 TINA-TI Reference Design (Rev. B)

THS6022 TINA-TI Spice Model (Rev. A)

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos