AFE5801
8 canales VGA con convertidor analógico a digital (ADC)
AFE5801
- Eight Variable-Gain Amplifiers (VGA)
- Eight Differential Buffered Inputs With 2Vpp Maximum Swing
- 5.5nV/√Hz VCA Input Noise (31dB Gain)
- Variable Gain, –5dB to 31dB With 0.125dB or 1dB Steps
- Digital Gain Control
- Third-Order Antialiasing Filter With Programmable Cutoff Frequency (7.5, 10, or 14MHz)
- Clamping
- Analog-to-Digital Converter (ADC)
- Octal Channel, 12Bit, 65MSPS
- Internal and External Reference Support
- No External Decoupling Required for References
- Serial LVDS Outputs
- 1.8V and 3.3V Supplies
- 50mW Total Power per Channel at 30MSPS
- 58mW Total Power per Channel at 50MSPS
- 64QFN Package (9mm × 9mm)
- APPLICATIONS
- Imaging: Ultrasound, PET
- APPLICATIONS
- AFE5851: 16-Channel VGA + ADC, 32.5MSPS/Channel
The AFE5801 is an analog front end, targeting applications where the power and level of integration are critical. The device contains eight variable-gain amplifiers (VGA), each followed by a high-speed (up to 65MSPS) ADC, for a total of eight ADCs per device.
Each of the eight differential inputs is buffered, accepts up to 2Vpp maximum input swing, and is followed by a VGA with a gain range from –5dB to 31dB. The VGA gain is digitally controlled, and the gain curves versus time can be stored in memory integrated within the device using the serial interface.
A selectable clamping and antialias low-pass filter (with 3dB attenuation at 7.5, 10, or 14MHz) is also integrated between VGA and ADC, for every channel.
The VGA/antialias filter outputs are differential (limited to 2Vpp) and drive the onboard 12bit, 65MSPS ADC. The ADC also scales down its power consumption should a lower sampling rate be selected. The ADC outputs are serialized in LVDS streams, which further minimizes power and board area.
The AFE5801 is available in a 64-pin QFN package (9mm × 9mm) and is specified over the full industrial temperature range (–40°C to 85°C).
Documentación técnica
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
AFE5801EVM — Módulo de evaluación AFE5801
El módulo de evaluación (EVM) AFE5801 es una plataforma para desarrollar el dispositivo AFE5801. El AFE5801 incluye un amplificador controlado por tensión (VCA) de ocho canales con control digital y un convertidor analógico a digital (ADC) 65 MSPS de ocho canales. El circuito de extremo frontal (...)
SLOC231 — TSW1250EVM Software
Productos y hardware compatibles
Productos
AFE de ultrasonido
Desarrollo de hardware
Placa de evaluación
SLOC145 — AFE5801 and AFE5851 TGC Calculator
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
VQFN (RGC) | 64 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.