Detalles del producto

Number of input channels 1 Rating Catalog Operating temperature range (°C) -40 to 125
Number of input channels 1 Rating Catalog Operating temperature range (°C) -40 to 125
WSON (NHR) 16 20 mm² 5 x 4
  • Magnet-free operation
  • Sub-micron precision
  • Adjustable sensing range (through coil design)
  • Lower system cost
  • Remote sensor placement (decoupling the LDC from harsh environments)
  • High durability (by virtue of contact-less operation)
  • Insensitivity to environmental interference (such as dirt, dust, water, oil)
  • Supply voltage, analog: 4.75 V to 5.25 V
  • Supply voltage, I/O: 1.8 V to 5.25 V
  • Supply current (without LC tank): 1.7 mA
  • RP resolution: 16 bit
  • L resolution: 24 bit
  • LC frequency range: 5 kHz to 5 MHz
  • Magnet-free operation
  • Sub-micron precision
  • Adjustable sensing range (through coil design)
  • Lower system cost
  • Remote sensor placement (decoupling the LDC from harsh environments)
  • High durability (by virtue of contact-less operation)
  • Insensitivity to environmental interference (such as dirt, dust, water, oil)
  • Supply voltage, analog: 4.75 V to 5.25 V
  • Supply voltage, I/O: 1.8 V to 5.25 V
  • Supply current (without LC tank): 1.7 mA
  • RP resolution: 16 bit
  • L resolution: 24 bit
  • LC frequency range: 5 kHz to 5 MHz

The LDC1001 device is a 4.75-V to 5.25-V inductance-to-digital converter designed for parallel resistance (Rp) and inductance (L) measurements. Inductive sensing technology enables precise measurement of linear or angular position of metal targets in automotive and industrial applications.

Inductive sensing is a contactless, short-range sensing technology that can enable high-resolution sensing of conductive targets in the presence of dust, dirt, oil, and moisture, which can be used by applications in harsh environments.

The LDC1001 system consists of an inductive sensor, typically a PCB coil, and a conductive target.

The LDC1001 is available in a 16-pin WSON package and offers several modes of operation. A serial peripheral interface (SPI) simplifies connection to an MCU.

The LDC1001 device is a 4.75-V to 5.25-V inductance-to-digital converter designed for parallel resistance (Rp) and inductance (L) measurements. Inductive sensing technology enables precise measurement of linear or angular position of metal targets in automotive and industrial applications.

Inductive sensing is a contactless, short-range sensing technology that can enable high-resolution sensing of conductive targets in the presence of dust, dirt, oil, and moisture, which can be used by applications in harsh environments.

The LDC1001 system consists of an inductive sensor, typically a PCB coil, and a conductive target.

The LDC1001 is available in a 16-pin WSON package and offers several modes of operation. A serial peripheral interface (SPI) simplifies connection to an MCU.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LDC1101 ACTIVO Convertidor inductivo a digital monocanal, 1.8 V, L de 24 bits, Rp de 16 bits para aplicaciones de a LDC1101 offers similar measurements of Rp and L, with more configurability and a lower price.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Tipo Título Fecha
* Data sheet LDC1001 Inductance-to-Digital Converter datasheet PDF | HTML 21 nov 2019
Application note Common Inductive and Capacitive Sensing Applications (Rev. B) PDF | HTML 22 jun 2021
Application note LDC Device Selection Guide (Rev. D) PDF | HTML 15 jun 2021
Application note Sensor Design for Inductive Sensing Applications Using LDC (Rev. C) PDF | HTML 21 may 2021
Application note LDC Target Design (Rev. B) PDF | HTML 13 may 2021
EVM User's guide LDC1000/LDC1001/LDC1041/LDC1051 Evaluation Module User's Guide (Rev. B) 15 nov 2019
Application note LDC100x Temperature Compensation (Rev. A) 12 nov 2019
Application note Using Multiple Sensors With LDC100x (Rev. A) 12 nov 2019
Application note Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. B) 11 nov 2019
Application note Performing L Measurements from LDC DRDY Timing (Rev. A) 11 nov 2019
Application note Measuring Rp of an L-C Sensor for Inductive Sensing 01 oct 2015
Technical article Inductive sensing: Meet the new multichannel LDCs PDF | HTML 27 abr 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LDC1000EVM — LDC1000EVM: módulo de evaluación para convertidor inductivo a digital con bobina PCB de muestra

The LDC1000EVM (Evaluation Module) demonstrates the use of inductive sensing technology to sense and measure the presence, position or composition of a conductive target object. The module includes an example of a PCB sensor coil. An MSP430 microcontroller is used to interface the LDC to a host (...)

Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (NHR) 16 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos