Detalles del producto

Type Integrated Features Transformer drive Gain (min) (dB) 40 Gain (max) (dB) 64 Number of input channels 1 Supply voltage (min) (V) 7 Supply voltage (max) (V) 18 Operating temperature range (°C) -40 to 125 Interface type GPIO, LIN, SCI, SPI, UART Rating Automotive
Type Integrated Features Transformer drive Gain (min) (dB) 40 Gain (max) (dB) 64 Number of input channels 1 Supply voltage (min) (V) 7 Supply voltage (max) (V) 18 Operating temperature range (°C) -40 to 125 Interface type GPIO, LIN, SCI, SPI, UART Rating Automotive
TSSOP (PW) 28 62.08 mm² 9.7 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    Measurements up to 7 Meters through Air
  • Dual NMOS Low-Side Drivers
  • Configurable Burst Generator
  • Low-Noise Amplifier
  • 12-Bit SAR ADC
  • Configurable Digital Bandpass Filter
  • Digital Signal Envelope Detect
  • On-Chip 8-Bit Microprocessor
  • LIN 2.1 Physical Interface and Protocol
  • Watchdog Timer
  • Four-Wire SPI for Testability and Programming
  • 8K Bytes of OTP
  • 768 Bytes of FIFO RAM
  • 256 Bytes of Scratchpad RAM
  • 8K Bytes of Development RAM
  • 32 Bytes of EEPROM for Application

All trademarks are the property of their respective owners.

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    Measurements up to 7 Meters through Air
  • Dual NMOS Low-Side Drivers
  • Configurable Burst Generator
  • Low-Noise Amplifier
  • 12-Bit SAR ADC
  • Configurable Digital Bandpass Filter
  • Digital Signal Envelope Detect
  • On-Chip 8-Bit Microprocessor
  • LIN 2.1 Physical Interface and Protocol
  • Watchdog Timer
  • Four-Wire SPI for Testability and Programming
  • 8K Bytes of OTP
  • 768 Bytes of FIFO RAM
  • 256 Bytes of Scratchpad RAM
  • 8K Bytes of Development RAM
  • 32 Bytes of EEPROM for Application

All trademarks are the property of their respective owners.

The PGA450-Q1 device is a fully integrated system-on-a-chip analog front-end for ultrasonic sensing in automotive park-assist, object-detection through air, level sensing in large tanks, and distance measurements for anti-collision and landing assist of unmanned systems (such as drones, cameras, and robots). This highly integrated device enables a small form-factor and cost-optimized solution compared to discrete ultrasonic-sensor solutions. The PGA450-Q1 device can measure distances ranging from less than 1 meter up to 7 meters, at a resolution of 1 cm depending on the transducer-transformer sensor pair used in the system.

The PGA450-Q1 device has an integrated 8051 8-bit microcontroller and OTP memory for program storage to process the echo signal and calculate the distance between the transducer and targeted object. Full programmability is available for optimization of specific end applications, and to accommodate a wide-range of closed-top or open-top transducers. Configurable variables include the number of transmit pulses, driving frequency, LNA gain, and comparison signal thresholds. External communication with the PGA450-Q1 device is capable through the LIN 2.1 protocol, SPI, or UART interfaces.

For all available packages, see the orderable addendum at the end of the data sheet.

The PGA450-Q1 device is a fully integrated system-on-a-chip analog front-end for ultrasonic sensing in automotive park-assist, object-detection through air, level sensing in large tanks, and distance measurements for anti-collision and landing assist of unmanned systems (such as drones, cameras, and robots). This highly integrated device enables a small form-factor and cost-optimized solution compared to discrete ultrasonic-sensor solutions. The PGA450-Q1 device can measure distances ranging from less than 1 meter up to 7 meters, at a resolution of 1 cm depending on the transducer-transformer sensor pair used in the system.

The PGA450-Q1 device has an integrated 8051 8-bit microcontroller and OTP memory for program storage to process the echo signal and calculate the distance between the transducer and targeted object. Full programmability is available for optimization of specific end applications, and to accommodate a wide-range of closed-top or open-top transducers. Configurable variables include the number of transmit pulses, driving frequency, LNA gain, and comparison signal thresholds. External communication with the PGA450-Q1 device is capable through the LIN 2.1 protocol, SPI, or UART interfaces.

For all available packages, see the orderable addendum at the end of the data sheet.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
PGA460-Q1 ACTIVO Procesador de señal ultrasónica y controlador de transductor para sector automotriz PGA460-Q1 is an ultrasonic signal processor and transducer driver that supports a wider frequency range 30-80 kHZ and 180-480 kHz.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Tipo Título Fecha
* Data sheet PGA450-Q1 Ultrasonic-Sensor Signal Conditioner datasheet (Rev. D) PDF | HTML 07 jun 2016
Application note Ultrasonic Sensing Basics (Rev. D) PDF | HTML 02 dic 2021
Application note PGA450-Q1 Software Development Guide 31 oct 2018
Technical article How ultrasonic technology improves convenience and performance in home automation PDF | HTML 05 oct 2017
Technical article Power naps: saving energy using ultrasonic sensing PDF | HTML 16 ago 2016
Application note PGA450-Q1 Reset Issue During VPWR Ramp Down 24 may 2016
EVM User's guide PGA450Q1EVM-S User's Guide and TIDA-00151 UART Demo Instructional (Rev. B) PDF | HTML 24 mar 2016
EVM User's guide PGA450Q1EVM User's Guide (Rev. C) PDF | HTML 05 nov 2015
Application note LIN Demonstration using PGA450Q1EVM Firmware Rev 2.1 (Rev. A) 13 jul 2015
Application note Optimizing Performance of the PGA450-Q1 23 jun 2015
Application note Automatic Slave Node Position Detection (SNPD) for PGA450-Q1 17 jun 2015
Analog Design Journal 3Q 2012 Issue Analog Applications Journal 17 jul 2012
Analog Design Journal Using a fixed threshold in ultrasonic distance-ranging automotive applications 17 jul 2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

PGA450Q1EVM — PGA450Q1EVM - Módulo de evaluación del acondicionador de señal del sensor ultrasónico IC

This evaluation module features a PGA450-Q1 device which is a system on Chip (SOC) sensor interface IC for automotive ultrasonic sensors. It provides all signal conditioning and processing for the transducer echo signals and for calculating the distance between the transducer and objects. MCU and (...)

Guía del usuario: PDF | HTML
Firmware

TIDCAB3 TIDA-00151 UART & LIN Demo Firmware for PGA450-Q1

Productos y hardware compatibles

Productos y hardware compatibles

Productos
AFE sensores ultrasónicos
PGA450-Q1 Procesador de señal de sensor ultrasónico con microcontrolador (MCU) integrado
Desarrollo de hardware
Placa de evaluación
PGA450Q1EVM PGA450Q1EVM - Módulo de evaluación del acondicionador de señal del sensor ultrasónico IC PGA450Q1EVM-S Módulo de evaluación de factor de forma pequeño para IC de sensor ultrasónico para detección de dist
GUI para el módulo de evaluación (EVM)

SLDC008 PGA450Q1EVM GUI v1.50.3

Productos y hardware compatibles

Productos y hardware compatibles

Productos
AFE sensores ultrasónicos
PGA450-Q1 Procesador de señal de sensor ultrasónico con microcontrolador (MCU) integrado
Desarrollo de hardware
Placa de evaluación
PGA450Q1EVM PGA450Q1EVM - Módulo de evaluación del acondicionador de señal del sensor ultrasónico IC PGA450Q1EVM-S Módulo de evaluación de factor de forma pequeño para IC de sensor ultrasónico para detección de dist
Diseños de referencia

TIDA-00151 — IC de interfaz del sensor ultrasónico para sistemas de detección de puntos ciegos o asistente de est

The TIDA-00151 reference design contains a PGA450-Q1 which is a system on Chip (SOC) sensor interface IC for automotive Ultrasonic sensors. It provides all signal conditioning and processing for the transducer echo signals and for calculating the distance between the transducer and objects. MCU and (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 28 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos