Inicio Convertidores de datos Convertidores de datos integrados y de funciones especiales AFE de uso médico AFE de ultrasonido
Inicio
Convertidores de datos
Convertidores de datos integrados y de funciones especiales
AFE de uso médico
AFE de ultrasonido

TX7516

ACTIVO

Transmisor de 16 canales de 5 niveles

Haga su pedido ahora
Hoja de datos

TX7516

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Device type Transmitter Number of input channels 16 Active supply current (typ) (mA) 3.6 Supply voltage (max) (V) 5.5 Operating temperature range (°C) 0 to 70 Interface type Serial Rating Catalog
Device type Transmitter Number of input channels 16 Active supply current (typ) (mA) 3.6 Supply voltage (max) (V) 5.5 Operating temperature range (°C) 0 to 70 Interface type Serial Rating Catalog
FCCSP (ALH) 144 100 mm² 10 x 10
  • Transmitter supports:
    • 16-channel 5-level pulser and active transmit/receive (T/R) switch
  • 5-level pulser:
    • Maximum output voltage: ±100 V
    • Minimum output voltage: ±1 V
    • Maximum output current: 2 A
    • Support 4A output current mode.
    • True return to zero to discharge output to ground
    • Second harmonic of –45 dBc at 5 MHz
    • –3-dB Bandwidth with 1-kΩ || 240-pF load
      • 20 MHz for a ±100-V supply
      • 25 MHz for a ±70-V supply
      • 35 MHz for a ±100-V supply in 4A mode
    • Integrated jitter: 100 fs measured from 100 Hz to 20 kHz
    • CW mode close-in phase noise: –154 dBc/Hz at 1 kHz offset for 5-MHz signal
    • Very low receive power: 1mW/ch
  • Active transmit/receive (T/R) switch with:
    • Turnon resistance of 8 Ω
    • Turnon and Turnoff time: 100 ns
    • Transient glitch: 10 mVPP
  • On-chip beam former with:
    • Channel based T/R switch on and off controls
    • Delay resolution: half beamformer clock period, minimum 2 ns
    • Maximum delay: 214 beamformer clock period
    • Maximum beamformer clock speed: 320 MHz
    • Per channel pattern control with 2K distinct level.
    • Global and local repeat pattern, enabling long duration patterns for Shear Wave imaging
    • Supports 120 delay profiles
  • High-speed (400 MHz maximum), 2-lane LVDS serial programming interface.
    • Low programming time: < 500 ns for delay profile update
    • 32-bit Checksum feature to detect wrong SPI writes
  • Supports CMOS serial programming interface (50 MHz maximum)
  • Internal temperature sensor and automatic thermal shutdown
  • No specific power sequencing requirement
  • Error flag register to detect faulty conditions
  • Integrated passives for the floating supplies and bias voltages
  • Small package: FC-BGA-144 (10 mm × 10 mm) with 0.8-mm pitch
  • Transmitter supports:
    • 16-channel 5-level pulser and active transmit/receive (T/R) switch
  • 5-level pulser:
    • Maximum output voltage: ±100 V
    • Minimum output voltage: ±1 V
    • Maximum output current: 2 A
    • Support 4A output current mode.
    • True return to zero to discharge output to ground
    • Second harmonic of –45 dBc at 5 MHz
    • –3-dB Bandwidth with 1-kΩ || 240-pF load
      • 20 MHz for a ±100-V supply
      • 25 MHz for a ±70-V supply
      • 35 MHz for a ±100-V supply in 4A mode
    • Integrated jitter: 100 fs measured from 100 Hz to 20 kHz
    • CW mode close-in phase noise: –154 dBc/Hz at 1 kHz offset for 5-MHz signal
    • Very low receive power: 1mW/ch
  • Active transmit/receive (T/R) switch with:
    • Turnon resistance of 8 Ω
    • Turnon and Turnoff time: 100 ns
    • Transient glitch: 10 mVPP
  • On-chip beam former with:
    • Channel based T/R switch on and off controls
    • Delay resolution: half beamformer clock period, minimum 2 ns
    • Maximum delay: 214 beamformer clock period
    • Maximum beamformer clock speed: 320 MHz
    • Per channel pattern control with 2K distinct level.
    • Global and local repeat pattern, enabling long duration patterns for Shear Wave imaging
    • Supports 120 delay profiles
  • High-speed (400 MHz maximum), 2-lane LVDS serial programming interface.
    • Low programming time: < 500 ns for delay profile update
    • 32-bit Checksum feature to detect wrong SPI writes
  • Supports CMOS serial programming interface (50 MHz maximum)
  • Internal temperature sensor and automatic thermal shutdown
  • No specific power sequencing requirement
  • Error flag register to detect faulty conditions
  • Integrated passives for the floating supplies and bias voltages
  • Small package: FC-BGA-144 (10 mm × 10 mm) with 0.8-mm pitch

TX7516 is a highly integrated, high-performance transmitter solution for ultrasound imaging system. The device has total 16 pulser circuits, 16 transmit/receive switches (referred as T/R or TR switches), and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high voltage power supplies.

TX7516 has a pulser circuit that generates five-level high voltage pulses (up to ±100 V) that is used to excite multiple channels of an ultrasound transducer. The device supports total 16 outputs. The maximum output current is 2 A.

Device can be used as a transmitter solution for many applications like ultrasound imaging, non-destructive testing, SONAR, LIDAR, marine navigation system, brain imaging systems and so on.

TX7516 is a highly integrated, high-performance transmitter solution for ultrasound imaging system. The device has total 16 pulser circuits, 16 transmit/receive switches (referred as T/R or TR switches), and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high voltage power supplies.

TX7516 has a pulser circuit that generates five-level high voltage pulses (up to ±100 V) that is used to excite multiple channels of an ultrasound transducer. The device supports total 16 outputs. The maximum output current is 2 A.

Device can be used as a transmitter solution for many applications like ultrasound imaging, non-destructive testing, SONAR, LIDAR, marine navigation system, brain imaging systems and so on.
filter Buscar otro/a AFE de ultrasonido
Descargar Ver vídeo con transcripción Video
Solicitar más información

Consulte la hoja de datos completa y otros recursos de diseño para el TX7516 comercial específico para tecnología inalámbrica. Solicitar ahora

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TX7516 Five-Level, 16-Channel Transmitter with T/R Switch, and On-Chip Beamformer datasheet (Rev. A) PDF | HTML 30 mar 2022
Application note Improve Portability of Ultrasound Scanners with TI High-Voltage Switches PDF | HTML 12 jul 2024
Product overview Optimizing the Size of Handheld Ultrasound Front-End Circuit Designs PDF | HTML 15 dic 2023
Certificate TX7516EVM EU Declaration of Conformity (DoC) 05 oct 2023
Application brief Building High-Performance NDT Systems with Ultrasound Transmitters and Receivers PDF | HTML 04 ago 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TX7516EVM — Módulo de evaluación para transmisor de 16 canales de 5 niveles TX7516

El módulo de evaluación (EVM) TX7516 evalúa el rendimiento y las funciones del TX7516, que es una solución de transmisor de alto rendimiento altamente integrada para sistemas de imágenes por ultrasonidos. El TX7516 tiene un total de 16 circuitos pulsadores, 16 interruptores de transmisión/recepción (...)

Solicitar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
FCCSP (ALH) 144 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos