TLK1101E

Name: TLK1101E
Brand: TI
SKU: TLK1101E
Price: 8.045 USD

アクティブ

11.3Gbps ケーブルとプリント基板のイコライザ

ご注文はこちら

データシート

document-pdfAcrobat 11.3-Gbps Cable and PC Board Equalizer データシート (Rev. A) (英語)

TLK1101E

アクティブ

データシート

ご注文はこちら

製品詳細

Type

Redriver

Number of channels

1

Input compatibility

AC-coupling

Speed (max) (Gbpp)

11.3

Protocols

10G-SR/LR, Fibre Channel

Operating temperature range (°C)

-40 to 100

Type

Redriver

Number of channels

1

Input compatibility

AC-coupling

Speed (max) (Gbpp)

11.3

Protocols

10G-SR/LR, Fibre Channel

Operating temperature range (°C)

-40 to 100

VQFN (RGP)

20

16 mm² 4 x 4

Multi-Rate Operation up to 11.3Gbps
Compensates for up to 30dB Loss on the Receive Side and up to 7dB Loss on the Transmit Side at 5.65GHz
Input Offset Cancellation
Output Disable/Squelch Function
Loss Of Signal Detection
Adjustable Output Swing
Adjustable Output De-Emphasis
Two-Wire Serial Interface
Single 3.3V Supply
Surface Mount Small Footprint 4-mm × 4-mm 20-Pin QFN Package
APPLICATIONS
- High-Speed Links In Communication And Data Systems
- SFP+ and XFP Active Cables
- Backplane, Daughtercard, and Cable Interconnects for 10GE, 8GFC, 10GFC, 10G SONET, SAS, SATA

Multi-Rate Operation up to 11.3Gbps
Compensates for up to 30dB Loss on the Receive Side and up to 7dB Loss on the Transmit Side at 5.65GHz
Input Offset Cancellation
Output Disable/Squelch Function
Loss Of Signal Detection
Adjustable Output Swing
Adjustable Output De-Emphasis
Two-Wire Serial Interface
Single 3.3V Supply
Surface Mount Small Footprint 4-mm × 4-mm 20-Pin QFN Package
APPLICATIONS
- High-Speed Links In Communication And Data Systems
- SFP+ and XFP Active Cables
- Backplane, Daughtercard, and Cable Interconnects for 10GE, 8GFC, 10GFC, 10G SONET, SAS, SATA

The TLK1101E is a versatile and flexible high-speed equalizer for applications in digital high-speed links with data rates up to 11.3Gbps.

The TLK1101E can be configured in many ways to optimize its performance. It provides output de-emphasis adjustable from 0dB to 7dB using pins DE0 and DE1.

The output differential voltage swing can be set to 300mV_p-p, 600mV_p-p, or 900mV_p-p using the SWG pin. A controlling voltage on pin VTH can be used to adjust the input threshold voltage.

Pins LN0 and LN1 can be used to optimize the device performance for various interconnect lengths, e.g. from 0 to 20 meters of 24-AWG twinaxial cable.

The LOS (loss of signal) assert level can be set to a desired level through a controlling voltage connected to pin LOSL. The LOS assert levels can be chosen from two LOS assert level ranges selectable with the LOSR pin.

The output can be disabled using the DIS pin. The DIS and the LOS pin can be connected together to implement a squelch function.

The de-emphasis, the output voltage swing, the input threshold voltage, the output disable, and the LOS assert levels and ranges can alternatively be set using the two-wire serial interface through the SCL and SDA pins. The external pin configuration is the default device setup method. The active device control method is selected through register address 0 bit 0 (see Table 4 and Table 20). The two-wire serial interface also allows for the control of the input bandwidth to optimize the device performance for various data rates.

The high input signal dynamic range ensures low jitter output signals even when overdriven with input signal swings as high as 1600mV_p-p differential.

The low-frequency cut-off is low enough to support low-frequency control signals such as SAS and SATA out-of-band (OOB) signals.