この製品には新バージョンがあります。
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
TPS3808-Q1
- Qualified for Automotive Applications
- Power-On Reset Generator With Adjustable Delay Time: 1.25 ms to 10 s
- Very Low Quiescent Current: 2.4 µA Typical
- High Threshold Accuracy: 0.5% Typical
- Fixed Threshold Voltages for Standard Voltage Rails From 1.2 V to 5 V and Adjustable Voltage Down to 0.4 V Are Available
- Manual Reset (MR) Input
- Open-Drain RESET Output
- Temperature Range: –40°C to +125°C
- Small SOT-23 Package and WSON Package (TPS3808G01QDRVRQ1 only)
The TPS3808Gxx-Q1 microprocessor supervisory circuits monitor system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user-adjustable delay time after the SENSE voltage and MR return above their thresholds.
The TPS3808Gxx-Q1 device uses a precision reference to achieve 0.5% threshold accuracy for VIT ≤ 3.3 V. The reset delay time can be set to 20 ms by disconnecting the CT pin, 300 ms by connecting the CT pin to VDD using a resistor, or can be user-adjusted from 1.25 ms to 10 s by connecting the CT pin to an external capacitor. The TPS3808Gxx-Q1 has a very low typical quiescent current of 2.4 µA, so it is well suited for battery-powered applications. The device is available in a small SOT-23 package (one option available in WSON) and is fully specified over a temperature range of –40°C to +125°C (TJ).
For more information about TIs voltage supervisor portfolio, visit the Supervisor and Reset IC Overview Page page.
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン配置が異なる製品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPS3808Gxx-Q1 Low-Quiescent-Current Programmable-Delay Supervisory Circuit データシート (Rev. J) | PDF | HTML | 2017年 6月 13日 | ||
機能安全情報 | TPS3808-Q1 Functional Safety FIT Rate and Failure Mode Distribution | 2019年 12月 19日 | ||||
e-Book(PDF) | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019年 6月 28日 | ||||
設計ガイド | Automotive Power Reference Design for Low-Power TDA3x Based Systems (Rev. B) | 2017年 6月 14日 | ||||
設計ガイド | Automotive Power Frontend With Cold Crank Operation and EMI Filter Design Guide | 2015年 11月 30日 | ||||
設計ガイド | TIDA-00530 Test Results | 2015年 10月 13日 |
設計および開発
デスクトップにある「Design & development」(設計と開発) セクションをご覧ください。購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点