전원 관리 LCD 및 OLED 디스플레이 전원 및 드라이버

VCOM 조정을 위한 레퍼런스 전압 생성기

제품 상세 정보

Display type LCD unipolar IC integration Gamma buffer Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Level shifter/scan driver (Ch) 0 Features I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) to
Display type LCD unipolar IC integration Gamma buffer Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Level shifter/scan driver (Ch) 0 Features I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) to
TSSOP (PW) 8 19.2 mm² 3 x 6.4 VSON (DRC) 10 9 mm² 3 x 3
  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • ONBOARD NONVOLATILE MEMORY
  • IOUT: 100mA
  • LOW SUPPLY CURRENT: 900µA
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE
  • HIGH ESD RATING: 2kV HBM, 500V CDM
  • APPLICATIONS
    • LCD PANEL VCOM CALIBRATION
    • LCD PANEL BRIGHTNESS AND CONTRAST CONTROL
    • POTENTIOMETER REPLACEMENT
    • MOTOR DRIVE
    • PROGRAMMABLE POWER SUPPLY
    • PROGRAMMABLE OFFSET ADJUSTMENT
    • ACTUATOR CONTROL

PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.

  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • ONBOARD NONVOLATILE MEMORY
  • IOUT: 100mA
  • LOW SUPPLY CURRENT: 900µA
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE
  • HIGH ESD RATING: 2kV HBM, 500V CDM
  • APPLICATIONS
    • LCD PANEL VCOM CALIBRATION
    • LCD PANEL BRIGHTNESS AND CONTRAST CONTROL
    • POTENTIOMETER REPLACEMENT
    • MOTOR DRIVE
    • PROGRAMMABLE POWER SUPPLY
    • PROGRAMMABLE OFFSET ADJUSTMENT
    • ACTUATOR CONTROL

PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.

The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the integrated nonvolatile memory.

An initial output voltage and adjustment range can be set by an external resistor-divider. With its large output current capability (up to 100mA), the BUF01900 and BUF01901 are ideally suited as programmable VCOM calibrators in LCD panels.

The BUF01901 has the digital-to-analog converter (DAC) output brought out directly. It has a slightly lower cost than the BUF01900, and works very well with the integrated VCOM in traditional gamma buffers such as the BUFxx702, BUFxx703, BUFxx704 and BUF11705.

The BUF01900 and BUF01901 are both available in TSSOP-8 and 3mm x 3mm DFN-10 packages. The DFN-10 package (only 0.9mm in height) is especially well-suited for notebook computers. Both devices are specified from -40°C to +85°C.

The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the integrated nonvolatile memory.

An initial output voltage and adjustment range can be set by an external resistor-divider. With its large output current capability (up to 100mA), the BUF01900 and BUF01901 are ideally suited as programmable VCOM calibrators in LCD panels.

The BUF01901 has the digital-to-analog converter (DAC) output brought out directly. It has a slightly lower cost than the BUF01900, and works very well with the integrated VCOM in traditional gamma buffers such as the BUFxx702, BUFxx703, BUFxx704 and BUF11705.

The BUF01900 and BUF01901 are both available in TSSOP-8 and 3mm x 3mm DFN-10 packages. The DFN-10 package (only 0.9mm in height) is especially well-suited for notebook computers. Both devices are specified from -40°C to +85°C.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet Programmable Voltage Source with Memory datasheet (Rev. A) 2006/10/23
Application note Driving Capacitive Loads with Gamma Buffers 2012/11/20

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

Gamma Buffer I2C IBIS Model

SBOM409.ZIP (39 KB) - IBIS Model
계산 툴

SBOC222 Resistor Divider Calculator.ZIP

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
LCD 및 OLED 디스플레이 전원 및 드라이버
BUF01900 VCOM 조정을 위한 레퍼런스 전압 생성기
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 8 Ultra Librarian
VSON (DRC) 10 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상