홈 절연 절연 인터페이스 IC 절연 CAN 트랜시버
홈
절연
절연 인터페이스 IC
절연 CAN 트랜시버

ISO1042-Q1

활성

70V 버스 고장 방지 및 유연한 데이터 전송률을 제공하는 오토모티브 절연 CAN 트랜시버

지금 주문
데이터 시트

ISO1042-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Isolation rating Basic, Reinforced Data rate (max) (Mbps) 5 Working isolation voltage (VIOWM) (Vrms) 1060 Surge isolation voltage (VIOSM) (VPK) 6000, 10000 Transient isolation voltage (VIOTM) (VPK) 7071 Withstand isolation voltage (VISO) (Vrms) 5000 CMTI (min) (kV/µs) 85 Bus fault voltage (V) -70 to 70 Common-mode voltage (V) -30 to 30 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
Rating Automotive Isolation rating Basic, Reinforced Data rate (max) (Mbps) 5 Working isolation voltage (VIOWM) (Vrms) 1060 Surge isolation voltage (VIOSM) (VPK) 6000, 10000 Transient isolation voltage (VIOTM) (VPK) 7071 Withstand isolation voltage (VISO) (Vrms) 5000 CMTI (min) (kV/µs) 85 Bus fault voltage (V) -70 to 70 Common-mode voltage (V) -30 to 30 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
SOIC (DW) 16 106.09 mm² 10.3 x 10.3 SOIC (DWV) 8 67.275 mm² 5.85 x 11.5
  • AEC Q100: Qualified for automotive applications
  • Grade 1: –40°C to 125°C ambient temperature
  • Functional Safety-Capable
  • Meets the ISO 11898-2:2016 physical layer standard
  • Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps
  • Low loop delay: 152 ns
  • Protection features
    • DC bus fault protection voltage: ±70 V
    • HBM ESD tolerance on bus pins: ±16 kV
    • Driver Dominant Time Out (TXD DTO)
    • Undervoltage protection on VCC1 and VCC2
  • Common-Mode Voltage Range: ±30 V
  • Ideal passive, high impedance bus terminals when unpowered
  • High CMTI: 100 kV/µs
  • VCC1 voltage range: 1.71 V to 5.5 V
    • Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
  • VCC2 Voltage Range: 4.5 V to 5.5 V
  • Robust Electromagnetic Compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • Low emissions
  • 16-SOIC and 8-SOIC package options
  • Industrial version available: ISO1042
  • Safety-related certifications:
    • 7071-VPK VIOTM and 1500-VPK VIORM (Reinforced and Basic Options) per DIN VDE V 0884-11:2017-01
    • 5000-VRMS Isolation for 1 Minute per UL 1577
    • CQC, TUV and CSA certifications
  • AEC Q100: Qualified for automotive applications
  • Grade 1: –40°C to 125°C ambient temperature
  • Functional Safety-Capable
  • Meets the ISO 11898-2:2016 physical layer standard
  • Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps
  • Low loop delay: 152 ns
  • Protection features
    • DC bus fault protection voltage: ±70 V
    • HBM ESD tolerance on bus pins: ±16 kV
    • Driver Dominant Time Out (TXD DTO)
    • Undervoltage protection on VCC1 and VCC2
  • Common-Mode Voltage Range: ±30 V
  • Ideal passive, high impedance bus terminals when unpowered
  • High CMTI: 100 kV/µs
  • VCC1 voltage range: 1.71 V to 5.5 V
    • Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
  • VCC2 Voltage Range: 4.5 V to 5.5 V
  • Robust Electromagnetic Compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • Low emissions
  • 16-SOIC and 8-SOIC package options
  • Industrial version available: ISO1042
  • Safety-related certifications:
    • 7071-VPK VIOTM and 1500-VPK VIORM (Reinforced and Basic Options) per DIN VDE V 0884-11:2017-01
    • 5000-VRMS Isolation for 1 Minute per UL 1577
    • CQC, TUV and CSA certifications

The ISO1042-Q1 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1042-Q1 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000 VRMS and a working voltage of 1060 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1042-Q1 device is available for both basic and reinforced isolation (see Reinforced and Basic Isolation Options). The ISO1042-Q1 device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV) package.

The ISO1042-Q1 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1042-Q1 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000 VRMS and a working voltage of 1060 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1042-Q1 device is available for both basic and reinforced isolation (see Reinforced and Basic Isolation Options). The ISO1042-Q1 device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV) package.
filter 기타 절연 CAN 트랜시버 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
22개 모두 보기
유형 직함 날짜
* Data sheet ISO1042-Q1 ISO CAN Transceiver With 70-V Bus Fault Protection and Flexible Data datasheet (Rev. B) 2020/10/15
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) 2024/02/29
Certificate VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) 2024/01/31
White paper Understanding failure modes in isolators (Rev. B) PDF | HTML 2024/01/29
Certificate CQC Certificate for ISOxxDWx (Rev. J) 2023/03/27
Certificate CSA Certificate for ISO1042xDW 2023/03/16
Certificate CSA Certificate for ISO1042xDWV 2023/03/16
Certificate CQC Certificate for ISOxxDWV (Rev. A) 2023/02/07
Certificate TUV Certificate for Isolation Devices (Rev. K) 2022/08/05
Certificate UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. P) 2022/08/05
Application brief Isolate Your CAN Systems Without Compromising on Performance or Space (Rev. F) PDF | HTML 2022/08/04
White paper Distance Through Insulation: How Digital Isolators Meet Certification Requiremen PDF | HTML 2021/06/11
Application brief How to Isolate Signal and Power in Isolated CAN Systems (Rev. C) PDF | HTML 2021/05/25
Application note Top Design Questions about Isolating CAN Nodes Bus Design (Rev. A) PDF | HTML 2021/05/19
Application note Isolated CAN Reference Design (Rev. E) 2020/07/22
Functional safety information ISO1042-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA 2020/06/18
Technical article Streamlining isolated CAN and power interface designs for 48-V HEV systems PDF | HTML 2020/05/01
Technical article Why signal isolation matters in 48-V HEV/EV systems PDF | HTML 2019/11/20
Third party document Simplify Isolated CAN, Power Interfaces for HEV 48-V Systems 2019/07/16
Technical article 5 ways TI’s tiny devices deliver huge innovations to engineers PDF | HTML 2018/11/08
Technical article Reduce emissions and drive up immunity in your isolated CAN systems PDF | HTML 2018/11/07
Application note How to Design Isolated CAN Systems With Correct Bus Protection 2018/06/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ISO1042DWEVM — ISO1042DW 고속, 고성능, 견고한 EMC 절연 CAN 평가 모듈

ISO1042DWEVM is an evaluation module used to evaluate the high performance, reinforced isolated CAN ISO1042 in a 16-pin wide body SOIC package (package code DW). The EVM features enough test points and jumper options to evaluate the device with minimal external components.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

ISO1042DWVEVM — ISO1042DWV 고속, 고성능, 견고한 EMC 절연 CAN 평가 모듈

ISO1042DWVEVM is an evaluation module used to evaluate the high performance, reinforced isolated CAN ISO1042 in an 8-pin wide body SOIC package (package code DWV). The EVM features enough test points and jumper options to evaluate the device with minimal external components.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

ISO1042 IBIS Model

SLLM395.ZIP (84 KB) - IBIS Model
다운로드
레퍼런스 디자인

PMP22650 — GaN 기반, 6.6kW, 양방향, 온보드 충전기 레퍼런스 디자인

PMP22650 레퍼런스 설계는 6.6kW 양방향 온보드 충전기입니다. 이 설계에서는 2상 토템 폴 PFC와 동기 정류를 지원하는 풀 브리지 CLLLC 컨버터를 사용합니다. CLLLC은 주파수 및 위상 변조를 모두 활용하여 필요한 조정 범위 전반에 걸쳐 출력을 조정합니다. 이 설계에서는 TMS320F28388D 마이크로컨트롤러 내부의 단일 프로세싱 코어를 사용하여 PFC 및 CLLLC를 모두 제어합니다. 동기 정류는 로고우스키(Rogowski) 코일 전류 센서가 탑재된 동일한 마이크로컨트롤러를 통해 구현됩니다. 고속 GaN (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

TIDM-02014 — 고전력, 고성능 차량용 SiC 트랙션 인버터 레퍼런스 설계

TIDM-02014는 Texas Instruments와 Wolfspeed가 개발한 800V, 300kW SiC 기반 트랙션 인버터 시스템 레퍼런스 설계로, OEM 및 설계 엔지니어가 고성능, 고효율 트랙션 인버터 시스템을 만들고 출시 시기를 앞당길 수 있는 기반을 제공합니다. 이 솔루션은 TI 및 Wolfspeed의 트랙션 인버터 시스템 기술이 Wolfspeed SiC 전력 모듈을 구동하는 고성능 절연 게이트 드라이버 및 실시간 가변 게이트 구동 강도를 통해 사용 가능한 전압의 오버슈트를 줄임으로써 시스템 효율성을 개선하는 방법을 (...)
Design guide: PDF
레퍼런스 디자인

TIDA-020019 — 차량용 절연 CAN과 전원 프론트 엔드 레퍼런스 설계

This reference design demonstrates reinforced isolated CAN communication, which is widely used in automotive environments, in a small footprint. In hybrid and electric vehicles (HEV/EVs), a high-voltage network is floating with respect to the chassis ground. Isolation is required for the power and (...)
Design guide: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
SOIC (DW) 16 Ultra Librarian
SOIC (DWV) 8 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상