전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

LM3495

활성

2.9V~18V, 에뮬레이트된 피크 전류 모드 벅 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
비교 대상 장치와 유사한 기능
TPS546A24A 활성 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 10A, 동기 SWIFT™ 벅 컨버터 Upgraded PMBus and faster switching frequency.

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Controller Iout (max) (A) 10 Vin (min) (V) 2.9 Vin (max) (V) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Enable, Frequency synchronization, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iq (typ) (µA) 1800 Duty cycle (max) (%) 94
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Controller Iout (max) (A) 10 Vin (min) (V) 2.9 Vin (max) (V) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Enable, Frequency synchronization, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iq (typ) (µA) 1800 Duty cycle (max) (%) 94
  • Input Voltage from 2.9V to 18V
  • Output Voltage Adjustable from 0.6V to 5.5V
  • Feedback Accuracy: ±1%
  • Low-Side Sensing, Programmable Current Limit without Sense Resistor
  • Input Under Voltage Lockout
  • Hiccup Mode Current Limit Protection Eliminates Thermal Runaway During Fault Conditions
  • Internal Soft Start with Tracking Capability
  • 200 kHz to 1.5 MHz Switching Frequency, Synchronizable
  • On-Chip Gate Drivers
  • Soft Output Discharge During Shutdown
  • Startup into Output Pre-Bias
  • Operation from a Single Input Rail
  • Adaptive Duty Cycle Limit
  • TSSOP-16 Package

All trademarks are the property of their respective owners.

  • Input Voltage from 2.9V to 18V
  • Output Voltage Adjustable from 0.6V to 5.5V
  • Feedback Accuracy: ±1%
  • Low-Side Sensing, Programmable Current Limit without Sense Resistor
  • Input Under Voltage Lockout
  • Hiccup Mode Current Limit Protection Eliminates Thermal Runaway During Fault Conditions
  • Internal Soft Start with Tracking Capability
  • 200 kHz to 1.5 MHz Switching Frequency, Synchronizable
  • On-Chip Gate Drivers
  • Soft Output Discharge During Shutdown
  • Startup into Output Pre-Bias
  • Operation from a Single Input Rail
  • Adaptive Duty Cycle Limit
  • TSSOP-16 Package

All trademarks are the property of their respective owners.

The LM3495 is a PWM buck regulator which implements a unique emulated peak current mode control. This control method eliminates the switching noise which typically limits current mode operation at extremely short duty cycles and high operating frequency. The switching frequency is programmable between 200 kHz and 1.5 MHz, and can also be synchronized to an external clock. The LM3495 is also very fault tolerant with both switch node short, hiccup mode, and adaptive duty cycle limit protection. A 0.6V 1% reference and glitch free pre-biased start-up ensure the most demanding digital loads operate reliably. Internal soft start and the ability to track the output of another supply make the LM3495 versatile and efficient.

The LM3495 is a PWM buck regulator which implements a unique emulated peak current mode control. This control method eliminates the switching noise which typically limits current mode operation at extremely short duty cycles and high operating frequency. The switching frequency is programmable between 200 kHz and 1.5 MHz, and can also be synchronized to an external clock. The LM3495 is also very fault tolerant with both switch node short, hiccup mode, and adaptive duty cycle limit protection. A 0.6V 1% reference and glitch free pre-biased start-up ensure the most demanding digital loads operate reliably. Internal soft start and the ability to track the output of another supply make the LM3495 versatile and efficient.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet LM3495 Emulated Peak Current Mode Buck Controller for Low Output Voltage datasheet (Rev. F) 2013/04/04

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상