LMR36506-Q1
- AEC-Q100-qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- Documentation available to aid functional safety system design
- >80% efficiency at 1 mA
- 4 µA Iq (switching) at 24 VIN to 3.3 VOUT (fixed output option)
- Miniature solution size and low component cost
- 2-mm × 2-mm HotRod™ package with wettable flanks
- Internal compensation
- Designed for automotive applications:
- Junction temperature range –40°C to +150°C
- Pseudo-random spread spectrum compatible with CISPR 25 EMI standard
- Wide input voltage range: 3.0 V (falling threshold) to 65 V
- Adjustable, 3.3-V and 5-V fixed output voltage options available
- Synchronizable with MODE/SYNC pin variant
- Adjustable FSW: 200 kHz to 2.2 MHz with RT pin variant
- Pin compatible with LMR36503-Q1 (65 V, 300 mA)
The LMR36506-Q1 is the industrys smallest 65 V, 0.6 A synchronous step-down DC/DC converter in 2-mm x 2-mm HotRod™ package. This easy-to-use converter can handle input voltage transients up to 70 V, provide excellent EMI performance and support fixed 3.3 V, 5 V and other adjustable output voltages.
The LMR36506-Q1 uses peak current mode control architecture with internal compensation and maintains stable operation with minimal output capacitance. The wide input operating range of the LMR36506-Q1 helps it remain functional during a deep input voltage sag condition, making it an excellent choice for automotive applications withstanding severe cold crank start impulses. The PGOOD flag in the LMR36506-Q1 provides precise indication of the output voltage status, eliminating the requirement for an external supervisor. A seamless transition from FPWM to PFM, with an ultra-low standby quiescent current allows the LMR36506-Q1 to support much higher system efficiency at low output loads. The MODE/SYNC pin variant helps to synchronize the LMR36506-Q1 to an external clock. With the right resistor selection, the LMR36506-Q1 RT pin variant can also be externally programmed to any desired switching frequency of operation. The rich feature set of the LMR36506-Q1 is designed to simplify implementation for a wide range of automotive end equipments.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LMR36506-Q1 3-V to 65-V, 0.6-A Synchronous Buck Converter Optimized for Size and Light Load Efficiency datasheet (Rev. C) | PDF | HTML | 2020/06/19 |
Selection guide | Buck Converter Quick Reference Guide (Rev. B) | 2021/04/08 | ||
Functional safety information | LMR3650x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2020/10/26 | |
EVM User's guide | LMR36506MSCEVM User’s Guide (Rev. A) | 2020/05/19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMR36506EVM — 오토모티브 3V~65V, 0.6A 초소형 동기 벅 컨버터 평가 모듈
The LMR36506MSCEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36506-Q1 synchronous step-down converter. The LMR36503-Q1 can also be evaluated with LMR36506MSCEVM.
LMR36506MSC-Q1 PSpice Unencrypted Transient Model (Rev. A)
LMR36506MSC-Q1 TINA-TI Buck Startup Transient Model
LMR36506MSC-Q1 TINA-TI Buck Steady State Transient Model
LMR36506MSC-Q1 TINA-TI IBB Startup Transient Model
LMR36506MSC-Q1 TINA-TI IBB Steady State Transient Model
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN-HR (RPE) | 9 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치