전원 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)

LMZ10501

활성

5.5V, 1A 스텝다운 DC/DC 전원 모듈(3mm × 2.6mm 패키지)

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPSM82821 활성 5.5V 입력, 1A, 감압 모듈 - 통합 인덕터, 2 x 2.5 x 1.1mm μSIP 패키지 Newer solution with smaller BOM size, lower Iq, higher voltage accuracy
신규 TPSM828511 활성 2.7V~6V, 1A 저잡음 스텝다운 모듈, QFN 패키지 내 일체형 인덕터 포함 QFN package
비교 대상 장치와 유사한 기능
TPSM82821A 활성 µSiP 패키지에 통합 인덕터 및 강제 PWM 모드를 지원하는 5.5V 입력, 1A 스텝다운 컨버터 Smaller total BOM size of 23 mm² (saves >40% area) and 1% output voltage accuracy
신규 TPSM828301 활성 일체형 인덕터가 있는 2.25V~5.5V, 1A 고효율 강압 전원 모듈 Overmolded package with improved efficiency

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0.6 Vout (max) (V) 3.6 Switching frequency (min) (kHz) 1750 Switching frequency (max) (kHz) 2250 Features EMI Tested, Enable Control mode current mode Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0.6 Vout (max) (V) 3.6 Switching frequency (min) (kHz) 1750 Switching frequency (max) (kHz) 2250 Features EMI Tested, Enable Control mode current mode Duty cycle (max) (%) 100
USIP (SIL) 8 See data sheet
  • Output current up to 1 A
  • 2.7-V to 5.5-V input voltage range
  • 0.6-V to 3.6-V output voltage range
  • Efficiency up to 95%
  • Integrated inductor
  • 8-pin microSiP footprint
  • –40°C to 125°C junction temperature range
  • Adjustable output voltage
  • 2-MHz fixed PWM switching frequency
  • Integrated compensation
  • Soft-start function
  • Current limit protection
  • Thermal shutdown protection
  • Input voltage UVLO for power-up, power-down, and brownout conditions
  • Only 5 external components — resistor divider and 3 ceramic capacitors
  • Small design size
  • Low output voltage ripple
  • Easy component selection and simple PCB layout
  • High efficiency reduces system heat generation
  • Create a custom design using the LMZ10501 with the WEBENCH Power Designer
  • Output current up to 1 A
  • 2.7-V to 5.5-V input voltage range
  • 0.6-V to 3.6-V output voltage range
  • Efficiency up to 95%
  • Integrated inductor
  • 8-pin microSiP footprint
  • –40°C to 125°C junction temperature range
  • Adjustable output voltage
  • 2-MHz fixed PWM switching frequency
  • Integrated compensation
  • Soft-start function
  • Current limit protection
  • Thermal shutdown protection
  • Input voltage UVLO for power-up, power-down, and brownout conditions
  • Only 5 external components — resistor divider and 3 ceramic capacitors
  • Small design size
  • Low output voltage ripple
  • Easy component selection and simple PCB layout
  • High efficiency reduces system heat generation
  • Create a custom design using the LMZ10501 with the WEBENCH Power Designer

The LMZ10501 nano module is an easy-to-use step-down DC-DC design capable of driving up to 1-A load in space-constrained applications. Only an input capacitor, an output capacitor, a small V CON filter capacitor, and two resistors are required for basic operation. The nano module comes in an 8-pin µSIP footprint package with an inductor. Internal current limit based soft-start function, current overload protection, and thermal shutdown are also provided.

The LMZ10501 nano module is an easy-to-use step-down DC-DC design capable of driving up to 1-A load in space-constrained applications. Only an input capacitor, an output capacitor, a small V CON filter capacitor, and two resistors are required for basic operation. The nano module comes in an 8-pin µSIP footprint package with an inductor. Internal current limit based soft-start function, current overload protection, and thermal shutdown are also provided.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMR24220RB — LMR24220 5와트 멀티 레일 전원 공급 장치 레퍼런스 보드

The LMR24220 Multi-Rail reference board implements an extremely compact solution. It is designed to convert from 12V or 24V rails down to typical point-of-load voltages of 3.3V, 1.8V and 1.2V. This design utilizes an LMR24220 Nano Regulator and two LMZ10501 Nano Modules to demonstrate a complete (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LMZ10501SILEVM — LMZ10501 1A SIMPLE SWITCHER® 나노 모듈 평가 보드

The LMZ10501 SIMPLE SWITCHER® Nano Modules are easy-to-use DC/DC solutions optimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load with excellent power conversion efficiency, line and load regulation, and EMI performance.

The evaluation board (EVM) is (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LMZ10501 PSpice Average Model

SNVM146.ZIP (51 KB) - PSpice Model
시뮬레이션 모델

LMZ10501 PSpice Transient Model

SNVM148.ZIP (255 KB) - PSpice Model
시뮬레이션 모델

LMZ10501 Unencrypted PSpice Average Model

SNVM734.ZIP (1 KB) - PSpice Model
시뮬레이션 모델

LMZ10501 Unencrypted PSpice Transient Model

SNVM733.ZIP (2 KB) - PSpice Model
레퍼런스 디자인

TIDA-00420 — ADC 기반, 디지털 절연, 넓은 입력, 16채널, AC/DC 이진 입력 레퍼런스 설계

This reference design showcases a cost-optimized and scalable ADC-based AC/DC binary input module (BIM) architecture with reinforced isolation. The 16 channels of a 10- or 12-bit SAR ADC are used for sensing multiple binary inputs. The op amps, in addition to keeping the cost per-channel low, (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00204 — EMI/EMC 준수, 산업용 온도, 듀얼 포트 기가비트 이더넷 PHY 레퍼런스 설계

This design allows for performance evaluation of two industrial grade DP83867IR Gigabit Ethernet PHYs and Sitara™ host processors with integrated Ethernet MAC and Switch. It was developed to meet industrial requirements for EMI and EMC. The application firmware implements a driver for the (...)
사용 설명서: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010011 — 보호 릴레이 프로세서 모듈을 위한 고효율 전원 공급 장치 아키텍처 레퍼런스 설계

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
USIP (SIL) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상