홈 전원 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)
홈
전원 관리
DC/DC 전력 모듈
벅 모듈(통합 인덕터)

LMZ12010

활성

10A SIMPLE SWITCHER® 전원 모듈(20V 최대 입력 전압)

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPSM5D1806 활성 4.5V~15V 입력, 듀얼 6A, 단일 12A, 출력 전원 모듈 Higher current converter with remote sense in a smaller package.

LMZ12010

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 10 Vin (min) (V) 6 Vin (max) (V) 20 Vout (min) (V) 0.8 Vout (max) (V) 6 Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404 Features EMI Tested, Enable, Tracking Control mode current mode Duty cycle (max) (%) 85
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 10 Vin (min) (V) 6 Vin (max) (V) 20 Vout (min) (V) 0.8 Vout (max) (V) 6 Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404 Features EMI Tested, Enable, Tracking Control mode current mode Duty cycle (max) (%) 85
TO-PMOD (NDY) 11 266.85 mm² 15 x 17.79
  • Integrated shielded inductor
  • Simple PCB layout
  • Fixed switching frequency (350 kHz)
  • Flexible start-up sequencing using external soft start, tracking, and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • Junction temperature range: –40°C to 125°C
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fully enabled for WEBENCH power designer
  • Pin compatible with LMZ22010, LMZ22008, LMZ22006, LMZ12008, LMZ12006, LMZ23610, LMZ23608, LMZ23606, LMZ13610, LMZ13608, and LMZ13606
  • Electrical specifications
    • 50-W maximum total output power
    • Up to 10-A output current
    • Input voltage range: 6 V to 20 V
    • Output voltage range: 0.8 V to 6 V
    • Efficiency up to 92%
  • Performance benefits
    • High efficiency reduces system heat generation
    • Low radiated emissions (EMI) tested to EN55022 (1)
    • Only seven external components
    • Low output voltage ripple
    • No external heat sink required

(1)EN 55022:2006, +A1:2007, FCC Part 15 Subpart B, tested on Evaluation Board with EMI configuration.
  • Integrated shielded inductor
  • Simple PCB layout
  • Fixed switching frequency (350 kHz)
  • Flexible start-up sequencing using external soft start, tracking, and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • Junction temperature range: –40°C to 125°C
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fully enabled for WEBENCH power designer
  • Pin compatible with LMZ22010, LMZ22008, LMZ22006, LMZ12008, LMZ12006, LMZ23610, LMZ23608, LMZ23606, LMZ13610, LMZ13608, and LMZ13606
  • Electrical specifications
    • 50-W maximum total output power
    • Up to 10-A output current
    • Input voltage range: 6 V to 20 V
    • Output voltage range: 0.8 V to 6 V
    • Efficiency up to 92%
  • Performance benefits
    • High efficiency reduces system heat generation
    • Low radiated emissions (EMI) tested to EN55022 (1)
    • Only seven external components
    • Low output voltage ripple
    • No external heat sink required

(1)EN 55022:2006, +A1:2007, FCC Part 15 Subpart B, tested on Evaluation Board with EMI configuration.

The LMZ12010 SIMPLE SWITCHER power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ12010 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 device can accept an input voltage rail between 6 V and 20 V and deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12010 only requires two external resistors and external capacitors to complete the power solution. The LMZ12010 is a reliable and robust design with the following protection features: thermal shutdown, programmable input undervoltage lockout, output overvoltage protection, short circuit protection, output current limit, and the device allows start-up into a prebiased output.

The LMZ12010 SIMPLE SWITCHER power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ12010 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 device can accept an input voltage rail between 6 V and 20 V and deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12010 only requires two external resistors and external capacitors to complete the power solution. The LMZ12010 is a reliable and robust design with the following protection features: thermal shutdown, programmable input undervoltage lockout, output overvoltage protection, short circuit protection, output current limit, and the device allows start-up into a prebiased output.
filter 기타 벅 모듈(통합 인덕터) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
13개 모두 보기
유형 직함 날짜
* Data sheet LMZ12010 10-A SIMPLE SWITCHER® Power Module With 20-V Maximum Input Voltage datasheet (Rev. I) PDF | HTML 2022/03/30
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016/01/20
Application note AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013/05/06
User guide AN-2134 LMZ13610/8/6 and LMZ12010/8/6 Evaluation Board (Rev. C) 2013/04/24
EVM User's guide AN-2136 LMZ13610/8/6 and LMZ12010/8/6 Demo Board (Rev. B) 2013/04/24
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013/04/23
Application note AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013/04/23
Application note AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013/04/23
Design guide LMZ12010 20VIN 10AOUT Simple Switcher® Module Reference Design 2012/01/27
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMZ12010DEMO — 20V Simple Switcher® 모듈 10A 데모 보드

The LMZ12010 SIMPLE SWITCHER® power module is an easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 can accept an input voltage rail between 6V and 20V. (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LMZ12010EVAL — 20V Simple Switcher® 모듈 10A 평가 보드

The LMZ13610/8 and LMZ12010/8 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610/8 can accept an input voltage rail (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LMZ12010 PSpice Average Model

SNVM198.ZIP (50 KB) - PSpice Model
다운로드
시뮬레이션 모델

LMZ12010 PSpice Transient Model

SNVM199.ZIP (158 KB) - PSpice Model
다운로드
시뮬레이션 모델

LMZ12010 Unencrypted PSpice Average Model

SNVM756.ZIP (1 KB) - PSpice Model
다운로드
시뮬레이션 모델

LMZ12010 Unencrypted PSpice Transient Model

SNVM757.ZIP (2 KB) - PSpice Model
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TO-PMOD (NDY) 11 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상