TCAN1146-Q1
- AEC-Q100 (Grade 1): Qualified for automotive applications
- Meets the requirements of ISO 11898-2:2016
- TCAN1145-Q1 and TCAN1146-Q1 provide support for selective wake/partial networking while transmitting/receiving error-free Classic CAN or CAN FD data.
- CAN FD communication rates up to 5 Mbps
- Functional Safety Quality-Managed (TCAN1144-Q1 and TCAN1146-Q1)
- Functional Safety-Capable (TCAN1145-Q1)
- The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V
- Wide operating range:
- ±58-V Bus fault protection
- ±12-V Common mode
- TCAN1144-Q1 and TCAN1146-Q1 support:
- Watchdog: Timeout, Window and Q&A
- Bus fault diagnostics and reporting
- Programmable INH/LIMP pin
- 14-Pin SOIC, VSON and SOT23 packages
- VSON package with improved automated optical inspection (AOI) capability
The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.
The TCAN1145-Q1 and TCAN1146-Q1 transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode). The transceivers and selective wake function meet the specifications of the ISO 11898-2:2016 standard.
The TCAN1144-Q1 and TCAN1146-Q1 are full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults.
The TCAN114x-Q1 is a family of enhanced high-speed CAN FD transceivers that are register compatible enabling system designers the flexibility to implement features needed without hardware modifications and with minimal software changes. The TCAN1144-Q1 and TCAN1146-Q1 inhibit (INH) pin can be used to either enable node power or be configured as a limp home pin when a watchdog error takes place.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TCAN114x-Q1 Enhanced CAN FD Transceiver with Partial Networking datasheet (Rev. B) | PDF | HTML | 2022/03/23 |
| Application brief | Simplify the Design of Isolated CAN with Selective Wake ECUs | PDF | HTML | 2023/04/18 | |
| Application note | How Selective Wake Enables Partial Networking (Rev. B) | PDF | HTML | 2022/06/22 | |
| Application note | Protecting Automotive CAN Bus Systems From ESD Overvoltage Events | PDF | HTML | 2022/04/27 | |
| User guide | Q&A Watchdog Overview and Configuration | PDF | HTML | 2021/06/03 | |
| Technical article | How selective wake CAN transceivers enable lower power consumption in automotive d | PDF | HTML | 2021/02/22 | |
| Functional safety information | TCAN114x-Q1 Functional Safety Analysis Report | PDF | HTML | 2020/10/19 | |
| Functional safety information | TCAN114x-Q1 Functional Safety Report | PDF | HTML | 2020/10/19 | |
| Functional safety information | TCAN114x-Q1 Functional Safety Manual | PDF | HTML | 2020/03/04 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TCAN1145EVM — 워치독 및 부분 네트워킹을 지원하는 TCAN1145-Q1 CAN 트랜시버 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 14 | Ultra Librarian |
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
| VSON (DMT) | 14 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.