TLV841
Designed for high performance:
- Nano quiescent current: 125 nA (typical)
- High threshold accuracy: ±0.5% (typical)
- Built-in precision hysteresis (VHYS): 5% (typical)
Designed for a wide range of applications:
- Operating voltage range: 0.7 V to 5.5 V
- Adjustable threshold voltage: 0.505 V (typical)
- Fixed (VIT-) voltage: 0.8 V to 4.9 V in 0.1 V steps
- Separate SENSE pin (TLV841S)
- Active-low manual reset (MR) (TLV841M)
- Push-button monitoring for TLV841 (S/M variants)
- Reset time delay (tD): Capacitor-based programmable (TLV841C)
- Min time delay: 40 µs (typical) without capacitor
- Reset time delay (tD): Fixed time delay options (TLV841M and TLV841S)
- 40 µs, 2 ms, 10 ms, 30 ms, 50 ms, 80 ms, 100 ms, 150 ms, 200 ms
- Temperature range: –40°C to +125°C
Multiple output topologies, package type:
- TLV841xxDL: open-drain, active-low (RESET)
- TLV841xxPL: push-pull, active-low (RESET)
- TLV841xxDH: open-drain, active-high (RESET)
- TLV841xxPH: push-pull, active-high (RESET)
- Package: 0.73-mm x 0.73-mm DSBGA
TLV841 is a nano power, precision voltage supervisor with ±0.5% threshold accuracy in an ultra small DSBGA package. The TLV841 offers three pinout variants (S, M, C) to provide many unique options in the smallest total solution size in its class. Built-in hysteresis along with fixed or programmable (TLV841C) reset delay prevent false reset signals when monitoring a voltage rail or push button signals. On active-low outputs of TLV841S, increasing the voltage threshold hysteresis can be achieved by adding an external resistor between the SENSE and RESET pins. TLV841 with its precision performance, low power consumption, and best in-class features in the smallest compact form factor, offers an ideal solution for wide range battery powered applications such as personal and consumer products.
The separate VDD and SENSE (TLV841S) pins allow for the redundancy sought by high-reliability systems. SENSE is decoupled from VDD and can monitor rail voltages other than VDD or can be used as a push-button input. Optional use of external resistors are supported by the high impedance input of the SENSE pin. TLV841S offers fixed reset delay timing options with no need of an external capacitor. TLV841C allows programmable reset time delay including a minimum delay when the CT pin is left floating. TLV841M offers a separate manual reset (MR) pin to force a reset condition with an external signal or be used as a push button input. TLV841M can be setup for VDD and MR pin monitoring to create a simple two-channel supervisor solution. TLV841 operates over a temperature range of -40°C to +125°C (TA).
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TLV841 Small Size Nano-Power Voltage Supervisor in WCSP Package datasheet (Rev. D) | PDF | HTML | 2022/10/20 |
Technical article | Three reasons to add a voltage supervisor to your next wearable power design | PDF | HTML | 2021/06/17 | |
EVM User's guide | TLV841EVM Voltage Supervisor User's Guide (Rev. A) | PDF | HTML | 2021/06/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TLV841EVM — 조정 가능한 릴리스 지연 기능을 갖춘 초저전압 나노파워 슈퍼바이저용 TLV841 평가 모듈
TLV841 평가 모듈(EVM)은 4핀 WCSP(웨이퍼 칩 스케일 패키지)의 전압 감시 및 재설정 IC인 TLV841을 평가하기 위한 플랫폼입니다. TLV841은 1.5μA(최대)의 낮은 정동작 전류와 ±2% 정확도를 유지하면서 최대 6V까지 작동합니다.
TLV841EVM은 유연성을 극대화하기 위해 보드에 특별히 배치된 점퍼를 사용하여 세 가지 장치 변형 및 출력 토폴로지를 모두 지원합니다. 자세한 내용은 데이터시트를 참조하십시오.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
DSBGA (YBH) | 4 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치