TPS2513
- Supports USB DCP shorting D+ line to
D– line per USB battery charging specification, revision 1.2 (BC1.2) - Supports shorted mode (shorting D+ line to D– line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
- Supports USB DCP applying 2.7 V on D+ Line and 2 V on D- line (or USB DCP applying
2 V on D+ line and 2.7 V on D– line) (TPS2513, TPS2514) - Supports USB DCP applying 2.7 V on D+ line and 2.7 V on D- line (TPS2513A, TPS2514A)
- Supports USB DCP applying 1.2 V on
D+ and D– Lines - Automatically Switch D+ and D– Lines Connections for an Attached Device
- Dual USB Port Controller
(TPS2513, TPS2513A) - Single USB port controller
(TPS2514, TPS2514A) - Operating range: 4.5 V to 5.5 V
- Available in SOT23-6 package
The TPS251xx devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS251xx USB Dedicated Charging Port Controller datasheet (Rev. D) | PDF | HTML | 2018/08/08 |
| Application note | Effective System ESD Protection Guidelines:TPS251x USB Charging Port Controllers | 2016/07/19 | ||
| EVM User's guide | TPS2513EVM-527 (Rev. B) | 2013/10/10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS2513EVM-527 — TPS2513 듀얼 채널, 자동 감지 USB 충전 컨트롤러 평가 모듈
The Texas Instruments TPS2513EVM-527 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2513 Dual Channel, Auto Detect USB Charging Controller. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features
사용 설명서: PDF
시뮬레이션 모델
TPS2513 Unencrypted PSpice Transient Model Package (Rev. A)
SLVM877A.ZIP (39 KB) - PSpice Model
레퍼런스 디자인
PMP10885 — 85-265VAC 입력 5V의 4.8A 듀얼 포트 USB 충전기 레퍼런스 디자인
The PMP10885 reference design is capable of charging two devices simultaneously at 2.4A each. The UCC24636 synchronous rectifier controller and CSD18531Q5A FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2559 provides accurate and independent (...)
레퍼런스 디자인
PMP11281 — 88% 이상의 평균 효율성을 지원하는 범용 AC 입력 5V/10A/50W PSR 플라이백 전원 공급 장치 레퍼런스 디자인
PMP11281 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 40mW standby power losses and over 88% average (...)
레퍼런스 디자인
PMP11232 — 89.5% 이상의 평균 효율성을 지원하는 범용 AC 입력 5V/6A/30W PSR 플라이백 전원 공급 장치 레퍼런스 디자인
PMP11232 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 40mW standby power losses and over 89.5% average (...)
레퍼런스 디자인
PMP10974 — 89% 이상의 평균 효율성을 지원하는 범용 AC 입력 5V/10A/50W PSR 플라이백 전원 공급 장치 레퍼런스 디자인
PMP10974 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 40mW standby power losses and over 89% average (...)
레퍼런스 디자인
PMP9402 — 소형 듀얼 2.5A USB 차량용 충전기 레퍼런스 디자인
PMP9402 is a dual USB car charger. This design utilizes the LM3150, TPS2561 Dual Channel Power Switch and a TPS2513 USB Dedicated Charging Port Controller. This design operates from 6 to 40V in. The output is set to 5V; both channels have a 2.5A current limit. This design has a switching frequency (...)
레퍼런스 디자인
PMP9367 — 17.5W 듀얼 USB 차량용 충전기 레퍼런스 디자인
PMP9367 is a dual USB car charger reference design intended for use in aftermarket automotive application. This design utilizes the LM3150, TPS2561 Dual Channel Power Switch and a TPS2513 USB Dedicated Charging Port Controller. This design operates from 6 to 40V in. The outputs is set to 5V, (...)
레퍼런스 디자인
PMP10478 — 태블릿 및 스마트폰용 85VAC~265VAC 입력, 5V@30W 듀얼 포트 충전기 레퍼런스 디자인
This reference design is capable of charging two devices at 2.5A each with over 82% efficiency. The UCC24610 synchronous rectifier controller and CSD17312Q5 FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2561A provides accurate and independent (...)
레퍼런스 디자인
PMP8817 — 태블릿 및 스마트폰용 85VAC~265VAC 입력, 5V@4A 듀얼 포트 충전기 레퍼런스 디자인
This reference design is capable of charging two devices at 2A each with over 85% efficiency. The UCC24610 synchronous rectifier controller and CSD18533Q5A FET reduce the rectifier loss and provide ultra-high efficiency with a minimal increase in cost. The UCC28700 primary-side regulated (...)
Test report: PDF
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치