전원 관리 USB 전원 스위치 및 충전 포트 컨트롤러

조정 가능, 능동 저압, 정전류, 전류 제한 배전 스위치

TPS2550은(는) 새 설계에 권장하지 않습니다.
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS2552 활성 0.075-1.7A 조정 ILIMIT, 2.5-6.5V, 85mΩ USB 전원 스위치, 액티브-로우, 역방향 차단 This product is more accurate, SBS 1.1 Compliant, has faster communication capability and has a maintained design environment.

제품 상세 정보

Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TPS255x Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. C) PDF | HTML 2023/10/09

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치