TPS37100-Q1
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature TA
- Functional Safety-Capable (Targeted)
- Documentation available to aid functional safety system design
- ASIL-D Functional Safety-Compliant (Targeted for TPS37102)
- Development targeted for Functional Safety applications
- Documentation to aid ISO 26262 system design
- Systematic capability up to ASIL-D targeted
- Hardware capability up to ASIL-D targeted
- Wide supply voltage range: 3V to 105V
- Low quiescent current: 5µA
- High threshold accuracy: 1.1% (Max)
- -105V reverse polarity protection on SENSE
- 5µs fast UV/OV monitor for 24V/48V systems
- Integrated buffer (AOUT) for supply voltage measurement with enable and disable pin
- Fixed and programmable release time delay
- Fixed and programmable sense time delay
- Open-drain, active-low output: OUT A and OUT B
The TPS37100-Q1 and TPS37102-Q1 are 105V input voltage supervisors with low quiescent current (5uA), fast detection time, and an integrated buffer for supply voltage measurements. This family of devices can be connected directly to a 24V / 48V / 52V battery or voltage rail for continuous monitoring of over (OV) or under (UV) voltage conditions. Wide hysteresis voltage options are available to ignore false output deassertions that are be caused by battery voltage transients.
The TPS37100-Q1 and TPS37102-Q1 include two outputs (OUT A and OUT) that are used as separate OV and UV fault monitors enabling system to take different action based on the fault that occurs. Additionally, the AOUT pin provides a scaled down SENSE pin voltage output and is intended to be sampled by ADC for supply voltage measurements. The user can choose the scaling factor desired based on the orderable part selected. The TPS37102-Q1 comes with BIST which is implemented at start-up to verify device health as well as an optional latching feature on OUT A to help the system bring into a safe state when critical faults occurs.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS37100-Q1, TPS37102-Q1 Automotive 105V, 5μA, Window, Overvoltage, or Undervoltage Supervisor with Integrated Buffer for Supply Voltage Measurements datasheet | PDF | HTML | 2024/09/17 |
| EVM User's guide | TPS3710X Evaluation Module User's Guide | PDF | HTML | 2024/09/06 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS3710XEVM — TPS3710X 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치