전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

TPS53632

활성

3-2-1 위상 D-CAP+ 스텝다운 드라이버리스 컨트롤러(I2C 제어 지원)

제품 상세 정보

Vin (min) (V) 2.5 Vin (max) (V) 24 Iout (max) (A) 90 Operating temperature range (°C) -10 to 105 Control mode D-CAP+ Rating Catalog Vout (min) (V) 0.5 Vout (max) (V) 1.52 Features Adjustable current limit, Enable, Light Load Efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification Iq (typ) (µA) 6000 Duty cycle (max) (%) 50 Number of phases 3
Vin (min) (V) 2.5 Vin (max) (V) 24 Iout (max) (A) 90 Operating temperature range (°C) -10 to 105 Control mode D-CAP+ Rating Catalog Vout (min) (V) 0.5 Vout (max) (V) 1.52 Features Adjustable current limit, Enable, Light Load Efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification Iq (typ) (µA) 6000 Duty cycle (max) (%) 50 Number of phases 3
VQFN (RSM) 32 16 mm² 4 x 4
  • Selectable Phase Count: (3, 2, or 1)
  • I2C Interface for VID Control and Telemetry with Eight Device Addresses
  • D-CAP+ Control for Fast Transient Response
  • Dynamic Phase Add and Drop Operation
  • Switching Frequency: 300 kHz to 1 MHz
  • Digital Current Monitor
  • 7-Bit, DAC Output Range: 0.50 V to 1.52 V
  • Optimized Efficiency at Light and Heavy Loads
  • Accurate, Adjustable Voltage Positioning or Zero Slope Load-Line
  • Patented AutoBalance Phase Balancing
  • Selectable, 8-Level Current Limit
  • 2.5-V to 24-V Conversion Voltage Range
  • Default Boot Voltage: 1.00 V
  • Small, 4-mm x 4-mm, 32-Pin, VQFN PowerPAD Package
  • Selectable Phase Count: (3, 2, or 1)
  • I2C Interface for VID Control and Telemetry with Eight Device Addresses
  • D-CAP+ Control for Fast Transient Response
  • Dynamic Phase Add and Drop Operation
  • Switching Frequency: 300 kHz to 1 MHz
  • Digital Current Monitor
  • 7-Bit, DAC Output Range: 0.50 V to 1.52 V
  • Optimized Efficiency at Light and Heavy Loads
  • Accurate, Adjustable Voltage Positioning or Zero Slope Load-Line
  • Patented AutoBalance Phase Balancing
  • Selectable, 8-Level Current Limit
  • 2.5-V to 24-V Conversion Voltage Range
  • Default Boot Voltage: 1.00 V
  • Small, 4-mm x 4-mm, 32-Pin, VQFN PowerPAD Package

The TPS53632 device is a driverless step-down controller with serial control. Advanced features such as D-CAP+ architecture provide fast transient response, lowest output capacitance and high efficiency. The TPS53632 device supports the standard I2C Rev 3.0 interface for dynamic control of the output voltage and current monitor telemetry. It also has dynamic phase add and drop control and enters single-phase, discontinuous-current-mode operation to maximize light-load efficiency.

Other features include adjustable control of VCORE slew rate and voltage positioning. The TPS51604 device driver is designed specifically for this generation of controllers. In addition, the TPS53632 device can be used along with the TI power stage devices (driver MOSFETs). The TPS53632 device is packaged in a space saving, thermally enhanced, 32-pin VQFN package and is rated

The TPS53632 device is a driverless step-down controller with serial control. Advanced features such as D-CAP+ architecture provide fast transient response, lowest output capacitance and high efficiency. The TPS53632 device supports the standard I2C Rev 3.0 interface for dynamic control of the output voltage and current monitor telemetry. It also has dynamic phase add and drop control and enters single-phase, discontinuous-current-mode operation to maximize light-load efficiency.

Other features include adjustable control of VCORE slew rate and voltage positioning. The TPS51604 device driver is designed specifically for this generation of controllers. In addition, the TPS53632 device can be used along with the TI power stage devices (driver MOSFETs). The TPS53632 device is packaged in a space saving, thermally enhanced, 32-pin VQFN package and is rated

다운로드 스크립트와 함께 비디오 보기 동영상

설계 지원 툴은 VR@list.ti.com으로 문의해 주시기 바랍니다

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet TPS53632 3-2-1 Phase D-CAP+™ Step-Down Driverless Controller for Low-Voltage Applications with I2C Interface Control datasheet PDF | HTML 2014/08/08
Application note Multiphase Buck Design from Start to Finish, Part 1 (Rev. B) 2021/04/07

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RSM) 32 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상