TPS53840

활성

DDR5 서버 MRDIMM용 향상된 고전류 PMIC

제품 상세 정보

Vin (min) (V) 4.5 Vin (max) (V) 15 Features Complete Solution Iq (typ) (mA) 5 Rating Catalog Operating temperature range (°C) -40 to 125 DDR memory type DDR5, DDR5 server
Vin (min) (V) 4.5 Vin (max) (V) 15 Features Complete Solution Iq (typ) (mA) 5 Rating Catalog Operating temperature range (°C) -40 to 125 DDR memory type DDR5, DDR5 server
VQFN-HR (RWZ) 35 25 mm² 5 x 5
  • Compliant to JEDEC PMIC5020 for DDR5 MRDIMM and RDIMM
  • 4 Buck regulators
    • SWA (1.1V) 8.5A DC/10A Pk
    • SWB (1.1V) 8.5A DC/10A Pk
    • SWC (1.1V) 10A DC/11.5A Pk
    • SWD (1.8V) 3A DC/3.5A Pk
  • Single or dual phase for SWA and SWB
  • 2 LDO: 1.8V / 25mA and 1.0V / 20mA
  • VIN_Bulk (4.25V to 15V) and VIN_Mgmt (3.0V to 3.6V) input supplies
  • Automatic switchover from VIN_Mgmt to VIN_Bulk
  • Overvoltage, under voltage, over current, temperature warning and temperature shutdown
  • Error injection capability
  • DIMM specific registers for customization (EEPROM)
  • Persistent error log registers
  • Programmable switching frequency: 500kHz to 1.375MHz
  • Power good pin (CAMP) and General status interrupt pin (GSI_n)
  • I2C and I3C Bus interface for telemetry of voltage, current, power, temperature, and fault conditions
  • Enable with I2C/I3C, VR_EN pin or Auto power on
  • 5mm × 5mm, 35-Pin, QFN PowerPad™ package
  • Compliant to JEDEC PMIC5020 for DDR5 MRDIMM and RDIMM
  • 4 Buck regulators
    • SWA (1.1V) 8.5A DC/10A Pk
    • SWB (1.1V) 8.5A DC/10A Pk
    • SWC (1.1V) 10A DC/11.5A Pk
    • SWD (1.8V) 3A DC/3.5A Pk
  • Single or dual phase for SWA and SWB
  • 2 LDO: 1.8V / 25mA and 1.0V / 20mA
  • VIN_Bulk (4.25V to 15V) and VIN_Mgmt (3.0V to 3.6V) input supplies
  • Automatic switchover from VIN_Mgmt to VIN_Bulk
  • Overvoltage, under voltage, over current, temperature warning and temperature shutdown
  • Error injection capability
  • DIMM specific registers for customization (EEPROM)
  • Persistent error log registers
  • Programmable switching frequency: 500kHz to 1.375MHz
  • Power good pin (CAMP) and General status interrupt pin (GSI_n)
  • I2C and I3C Bus interface for telemetry of voltage, current, power, temperature, and fault conditions
  • Enable with I2C/I3C, VR_EN pin or Auto power on
  • 5mm × 5mm, 35-Pin, QFN PowerPad™ package

The TPS53840 is a D-CAP+™ mode integrated step-down converter for DDR5 on-DIMM power supply in servers fully compliant to Jedec PMIC5020. It provides VDD, VDDQ and VPP voltages to the DRAM chips on the DIMM module with configurable current capability. SWA and SWB can be configured to be either a dual phase output (20A) or 2 single outputs (10A each), while SWC is a single phase rail capable of 11.5A. The converter also employs internal compensation for ease of use and reduce external components.

The converter provides a full set of telemetry, including input voltage, output voltage, output current and output power. Protection features include input and output over voltage, input and output undervoltage, buck overcurrent limit, and die over temperature.

TPS53840 with its significantly higher current capability than JEDEC PMIC5000, and configurable Auto power on or VR_EN pin, is suitable for CXL memory module applications.

The TPS53840 is packaged in a thermally-enhanced 35-pin QFN and operates from -40°C to +105°C.

The TPS53840 is a D-CAP+™ mode integrated step-down converter for DDR5 on-DIMM power supply in servers fully compliant to Jedec PMIC5020. It provides VDD, VDDQ and VPP voltages to the DRAM chips on the DIMM module with configurable current capability. SWA and SWB can be configured to be either a dual phase output (20A) or 2 single outputs (10A each), while SWC is a single phase rail capable of 11.5A. The converter also employs internal compensation for ease of use and reduce external components.

The converter provides a full set of telemetry, including input voltage, output voltage, output current and output power. Protection features include input and output over voltage, input and output undervoltage, buck overcurrent limit, and die over temperature.

TPS53840 with its significantly higher current capability than JEDEC PMIC5000, and configurable Auto power on or VR_EN pin, is suitable for CXL memory module applications.

The TPS53840 is packaged in a thermally-enhanced 35-pin QFN and operates from -40°C to +105°C.

다운로드 스크립트와 함께 비디오 보기 동영상
추가 정보 요청

전체 데이터시트 및 추가 문서가 NDA에 따라 제공됩니다. 지금 요청

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TPS53840 Integrated Step-Down Converter for DDR5 MRDIMM Server Power Supply datasheet PDF | HTML 2024/04/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RWZ) 35 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상