TPS5420
- Wide Input Voltage Range: 5.5V to 36V
- Up to 2A Continuous (3A Peak) Output Current
- High Efficiency up to 95% Enabled by 110mΩ Integrated MOSFET Switch
- Wide Output Voltage Range: Adjustable Down to 1.22V with 1.5% Initial Accuracy
- Internal Compensation Minimizes External Parts Count
- Fixed 500kHz Switching Frequency for Small Filter Size
- Improved Line Regulation and Transient Response by Input Voltage Feed Forward
- System Protected by Over Current Limiting, Over Voltage Protection and Thermal Shutdown
- –40°C to 125°C Operating Junction Temperature Range
- Available in Small 8-Pin SOIC Package
The TPS5420 is a high-output-current PWM converter that integrates a low resistance high side N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5420 feedback loop is internally compensated.
The TPS5420 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS5420 2A, Wide Input Range, Step-Down Converter datasheet (Rev. F) | PDF | HTML | 2024/01/19 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Analog Design Journal | Power-supply design for high-speed ADCs (Rev. A) | 2015/05/18 | ||
| Application note | Output Ripple Voltage for Buck Switching Regulator (Rev. A) | 2014/10/13 | ||
| Application note | Using the TPS5430 As An Inverting Buck Boost Converter (Rev. A) | 2007/08/15 | ||
| Application note | Using TPS5410/20/30/31/50 w/Aluminum/Ceramic Output Capacitors (Rev. C) | 2007/03/21 | ||
| EVM User's guide | TPS5420EVM-175 User's Guide | 2006/04/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS5420EVM-175 — 10V~36Vin, 2A 스텝다운 컨버터 평가 모듈
The TPS5420EVM-175 evaluation module allows the designer to evaluate the TPS5420 SWIFT DC/DC converter optimized for small size. The input voltage range of this module is 10 V to 36 V and the output voltage is pre-set to 5 V. The output voltage can be easily adjusted by changing a (...)
TPS5420 TINA-TI Steady State Reference Design
TIDEP0008 — PROFINET 통신 개발 플랫폼
TIDEP0003 — 이더넷/IP 통신 개발 플랫폼
TIDEP0002 — PROFIBUS 통신 개발 플랫폼
TIDEP0054 — 변전소 자동화를 위한 병렬 중복 프로토콜(PRP) 이더넷 레퍼런스 설계
TIDEP0043 — Acontis EtherCAT 마스터 스택 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치