TPS60205
- Regulated 3.3-V output voltage with up to 100-mA output current from a 1.8-V to 3.6-V input voltage
- Less than 5-mV (PP) output voltage ripple achieved with push-pull topology
- Integrated low-battery and power-good detector
- Switching frequency can be synchronized to external clock signal
- Extends battery usage with up to 90% efficiency and 35-µA quiescent supply current
- Easy-to-design, low cost, low EMI power supply since no inductors are used
- 0.05-µA shutdown current, battery is isolated from load in shutdown mode
- Compact converter solution in ultrasmall 10-pin MSOP with only four external capacitors required
- Evaluation module available (TPS60200EVM-145)
The TPS6020x step-up, regulated charge pumps generate a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage. The devices are typically powered by two Alkaline, NiCd, or NiMH battery cells and operate down to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 mA from a 2-V input. Only four external capacitors are needed to build a complete low-ripple dc/dc converter. The push-pull operating mode of two single-ended charge pumps assures the low output voltage ripple, as current is continuously transferred to the output.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS60204, TPS60205 Regulated 3.3-V, 100-mA Low-Ripple Charge Pump Low-Power DC/DC Converters datasheet (Rev. B) | PDF | HTML | 2023/05/30 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치