홈 전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전원 관리
AC/DC 및 DC/DC 컨버터(통합 FET)

TPS61021A

활성

3A 부스트 컨버터(0.5V 초저전력 입력 전압)

지금 주문
데이터 시트

TPS61021A

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 0.5 Vin (max) (V) 4.4 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 2000 Features Bypass Mode Pass-through Mode, Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification Vout (min) (V) 1.8 Vout (max) (V) 4 Iq (typ) (µA) 17 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.3
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 0.5 Vin (max) (V) 4.4 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 2000 Features Bypass Mode Pass-through Mode, Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification Vout (min) (V) 1.8 Vout (max) (V) 4 Iq (typ) (µA) 17 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.3
WSON (DSG) 8 4 mm² 2 x 2
  • Input Voltage Range: 0.5 V to 4.4 V
  • 0.9 V Minimum Input Voltage for Startup
  • Output Voltage Setting Range: 1.8 V to 4.0 V
  • 91% Efficiency at VIN = 2.4 V, VOUT = 3.3 V and
    IOUT = 1.5 A
  • 2.0-MHz Switching Frequency
  • IOUT > 1.5 A at VOUT = 3.3 V when VIN > 1.8 V
  • 17-µA Typical Quiescent Current
  • ±2.5% Reference Voltage Accuracy over –40°C to
    125°C
  • PFM Operation Mode at Light Load
  • True Disconnection Between Input and Output
    During Shutdown
  • Output Over Voltage Protection
  • Output Short Circuit Protection
  • Thermal Shutdown Protection
  • 2-mm × 2-mm WSON Package
  • Input Voltage Range: 0.5 V to 4.4 V
  • 0.9 V Minimum Input Voltage for Startup
  • Output Voltage Setting Range: 1.8 V to 4.0 V
  • 91% Efficiency at VIN = 2.4 V, VOUT = 3.3 V and
    IOUT = 1.5 A
  • 2.0-MHz Switching Frequency
  • IOUT > 1.5 A at VOUT = 3.3 V when VIN > 1.8 V
  • 17-µA Typical Quiescent Current
  • ±2.5% Reference Voltage Accuracy over –40°C to
    125°C
  • PFM Operation Mode at Light Load
  • True Disconnection Between Input and Output
    During Shutdown
  • Output Over Voltage Protection
  • Output Short Circuit Protection
  • Thermal Shutdown Protection
  • 2-mm × 2-mm WSON Package

The TPS61021A provides a power supply solution for portable or smart devices powered by alkaline, NiMH, Li-Mn, or Li-ion batteries. The TPS61021A is capable of outputting 3.3-V voltage and 1.5-A current from a battery discharged to as low as 1.8 V. Capable of operating with 0.5-V input voltage enables the TPS61021A to extend the battery run time.

The TPS61021A operates at 2-MHz switching frequency at heavy load and enters power-save mode at light load to maintain high efficiency over the entire load current range. The device only consumes a 17-µA quiescent current from VOUT in light load condition. During shutdown, the load is completely disconnected from the input. In addition, The TPS61021A provides 4.35-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.

The TPS61021A offers a very small solution size due to low count of external components. It allows the use of small inductors and output capacitors with the 2-MHz switching frequency.

The TPS61021A is available in 2.0-mm × 2.0-mm WSON package.

The TPS61021A provides a power supply solution for portable or smart devices powered by alkaline, NiMH, Li-Mn, or Li-ion batteries. The TPS61021A is capable of outputting 3.3-V voltage and 1.5-A current from a battery discharged to as low as 1.8 V. Capable of operating with 0.5-V input voltage enables the TPS61021A to extend the battery run time.

The TPS61021A operates at 2-MHz switching frequency at heavy load and enters power-save mode at light load to maintain high efficiency over the entire load current range. The device only consumes a 17-µA quiescent current from VOUT in light load condition. During shutdown, the load is completely disconnected from the input. In addition, The TPS61021A provides 4.35-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.

The TPS61021A offers a very small solution size due to low count of external components. It allows the use of small inductors and output capacitors with the 2-MHz switching frequency.

The TPS61021A is available in 2.0-mm × 2.0-mm WSON package.
filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV61070A 활성 최저 입력 전압 0.5V의 5V 2A 부스트 컨버터 More cost-effective
TPS61033 활성 5V, 5A 부스트 컨버터(전원 양호, 출력 방전 및 PFM/PWM 제어 포함) 5A/1.5A valley switch current limit and SOT583 packge with size of 2.1 x 1.2mm

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
13개 모두 보기
유형 직함 날짜
* Data sheet TPS61021A 3-A Boost Converter with 0.5-V Ultra Low Input Voltage datasheet PDF | HTML 2016/06/01
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
Application note 스트컨버터의 전력계 기본 계산 (Rev. D) PDF | HTML 2022/11/21
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 2021/02/22
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
Technical article How energy harvesting can extend the life of your fault indicator on the grid PDF | HTML 2017/10/18
Application note Single LED Driver in AA Battery-Powered Systems 2017/08/25
Application note Feedforward Capacitor Makes Boost Converter Fast and Stable 2016/11/02
User guide TPS61021A-PWR723 Evaluation Module (Rev. A) 2016/06/16
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 2012/04/26
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/09/19
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17
Application note Minimizing Ringing at the Switch Node of a Boost Converter 2006/09/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS61021EVM-723 — TPS61021A용 부스트 컨버터 평가 모듈

The TPS61021A provides a power supply solution for portable devices and IoT devices powered by alkaline battery or LiMn battery. The TPS61021A supports up to 1.5A load current from a battery discharged as low as 1.8V. The TPS61021A operates at a regulated 2.0-MHz switching frequency and enters (...)
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS61021A Unencrypted PSpice Transient Model Package (Rev. B)

SLVMBI5B.ZIP (97 KB) - PSpice Model
다운로드
레퍼런스 디자인

TIDA-00998 — 오버헤드 고장 표시기용 에너지 하베스팅 및 고장 표시기 서브시스템 레퍼런스 디자인

This reference design shows multiple architectures for extending primary battery life using a secondary battery or supercapacitor with energy harvested from a current transformer (CT) or solar cells. Optimal power management is done using efficient LED drivers to drive series or parallel (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01385 — 고장 표시기를 위한 슈퍼 커패시터를 사용한 전류 변압기의 에너지 하베스팅 레퍼런스 디자인

Power management for the energy harvesting, energy buffering and back-up power is a key challenge in the fault indicator design. The TIDA-01385 introduces a circuit about harvesting energy from a current transformer for the system load of a fault indicator while storing the extra energy in a super (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01574 — 전력 도용 온도 조절기용 전력계 레퍼런스 설계

TIDA-01574 is a reference design for high-efficiency power stealing for smart thermostats and other building automation equipment. In general, power stealing enables to extend battery life of Wi-Fi enabled smart thermostats by drawing power from 24-V AC when the HVAC load is off. This (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01387 — LiSoCL2 배터리를 사용하는 GPRS 모뎀용 전원 공급 장치 레퍼런스 디자인

This design demonstrates how to power GPRS modems in smart meters using LiSoCL2 batteries. GPRS modems require peak current of up to 2A during transmission. This design reduces the peak load requirements on the battery by using the TPS61021A boost converter and a 20F super capacitor to provide the (...)
Design guide: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WSON (DSG) 8 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상