TPS62902-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T A
- Level 2 device HBM ESD classification
- Level C4B CDM ESD classification
- Functional Safety-Capable
- Extended T J range: up to 165°C
- High efficiency DCS-Control topology
- R DS(ON): 62-mΩ high side, 22-mΩ low side
- Seamless PWM/PFM transition
- Internal compensation
- 4-µA low I Q (typical)
- Up to 2-A continuous output current
- ±1.5% output voltage accuracy across temp
- Configurable output voltage options:
- 0.6-V to 5.5-V V FB external divider
- V SET internal divider
- 16 options between 0.4 V and 5.5 V
- Flexibility through the MODE/S-CONF pin
- 2.5-MHz or 1.0-MHz switching frequency
- Forced PWM or Auto PFM (power save mode) with dynamic mode change option
- Output discharge on and off
- No external bootstrap capacitor required
- Overcurrent and overtemperature protection
- 100% duty cycle mode
- Precise enable input
- Adjustable soft start and tracking
- Power-good output
- Optimized pinout for single-layer routing
- Wettable 2.2-mm × 2.0-mm VQFN package with 0.5-mm pitch
- Create a custom design with the TPS62902-Q1 using the WEBENCH Power Designer
The TPS62902-Q1 is a highly efficient, small, and flexible synchronous step-down DC/DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high V OUT accuracy of ± 1.5% across the entire operating temperature range and enhanced load transient performance with the DCS-Control topology. The wide 3-V to 18-V input voltage range supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.
The TPS62902-Q1 can automatically enter power save mode (if auto PFM or PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across V IN, V OUT, and load current. The device includes a MODE/Smart-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS62902-Q1 3-V to 18-V, 2-A, Automotive Low IQ Buck Converter with +165°C TJ datasheet | PDF | HTML | 2023/04/24 |
| Certificate | TPS62902-Q1EVM EU RoHS Declaration of Conformity (DoC) | 2023/04/13 | ||
| Application note | Comparison of TPS629xx-Q1 vs. TPS621x0A-Q1 | PDF | HTML | 2022/12/13 | |
| Application note | Using the TPS6290x in an Inverting Buck – Boost Topology | PDF | HTML | 2022/07/12 | |
| Functional safety information | TPS629xx-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2022/05/06 | |
| User guide | TPS6290x-Q1 Step-Down Converter Evaluation Module User's Guide | PDF | HTML | 2022/05/02 | |
| Application note | How to Best Use TPS62903 for a Given Application Requirement | PDF | HTML | 2021/08/13 | |
| Application brief | Multi-Function Pins for Easy Designing | PDF | HTML | 2021/07/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62901-Q1EVM — TPS62901 3V~18V, 1A, 저 IQ 동기식 벅 컨버터용 평가 모듈
TPS62902-Q1(BSR196) 평가 모듈(EVM)은 습식 플랭크가 달린 소형 2.2mm x 2mm VQFN 패키지에 들어 있는 1A, 2A 및 3A 핀 대 핀 호환 벅 컨버터 평가를 용이하게 합니다. BSR196-003은 3A TPS62903-Q1을 사용하여 3V~18V 사이의 입력 전압에서 1.2V 출력 전압을 출력합니다. BSR196-002는 2A TPS62902-Q1을 사용하여 3V~18V 사이의 입력 전압에서 1.8V 출력 전압을 출력합니다. BSR196-001은 1A TPS62901-Q1을 사용하여 3V~18V (...)
TPS62903-Q1EVM — 3V~18V, 3A, 저 IQ, 동기 벅 컨버터용 TPS62903 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RYT) | 9 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치