TPS65131-Q1
- Qualified for automotive applications
- AEC-Q100 test guidance with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Electrical characteristics tested over –40°C to 125°C junction temperature range
- Device HBM ESD classification level H1C
- Device CDM ESD classification level C4B
- Dual adjustable output voltages up to 15V and down to –15V
- 2A typical switch-current limit for boost and inverter main switches
- High conversion efficiency
- Up to 91% at positive output rail
- Up to 85% at negative output rail
- Power-save mode at low load
- Independent enable inputs for power-up and power-down Sequencing
- Control output for external PFET to support complete supply Disconnect When Shut Down
- 2.7V to 5.5V input-voltage range
- Minimum 1.25MHz fixed-frequency PWM operation
- Thermal shutdown
- Overvoltage protection on both outputs
- 0.2µA typical shutdown current
- Small 4mm × 4mm QFN-24 package (RGE) with wettable flanks
The TPS65131-Q1 device is dual-output dc-dc converter generating a positive output voltage up to 15V and a negative output voltage down to –15V with output currents of typically 200mA, depending on input-voltage to output-voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input-voltage range of 2.7V to 5.5V allows, for example, 3.3V and 5V rails to power the TPS65131-Q1 device. The TPS65131-Q1 device comes in a QFN-24 package with thermal pad and wettable flanks. Requiring few and small external components, the overall solution size can be small.
The converter operates with a fixed-frequency PWM control topology and, with power-save mode enabled, uses a pulse-skipping mode at light load currents. In operation, the typical overall device quiescent current is only 500µA. In shutdown, the device draws typically 0.2µA. Independent enable pins allow power-up and power-down sequencing for both outputs. The device has an internal current limit, overvoltage protection, and a thermal shutdown for highest reliability under fault conditions.
The TPS65131-Q1 device is qualified for automotive applications, according to AEC-Q100 temperature grade 2. The electrical characteristics are tested over –40°C to 125°C device junction temperature. This, combined with lowest shutdown currents, small solution size, package with thermal pad, plus good efficiency and protection features, targets automotive and industrial applications.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS65131-Q1 Positive- and Negative-Output DC-DC Converter datasheet (Rev. F) | PDF | HTML | 2024/08/25 |
| Application note | 스트컨버터의 전력계 기본 계산 (Rev. D) | PDF | HTML | 2022/11/21 | |
| Application note | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018/09/19 | ||
| White paper | Powering automotive displays to create interactive driving experiences | 2017/12/21 | ||
| Application note | Basic calculation of an inverting buck-boost power stage (Rev. A) | 2017/08/28 | ||
| Technical article | Split-rail converters reduce BOM size and cost in new automotive displays | PDF | HTML | 2015/07/01 | |
| EVM User's guide | TPS65131EVM User's Guide (Rev. C) | 2010/11/23 | ||
| Application note | Minimizing Ringing at the Switch Node of a Boost Converter | 2006/09/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
PMP9780 — 레퍼런스 디자인: TPS65131-Q1 및 충전 펌프를 사용한 양극 TFT LCD 전원
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.