TPS65735

활성

액티브 셔터 3D 안경을 위한 전원 관리 IC(PMIC)

제품 상세 정보

Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 1 LDO 1 Vin (min) (V) 2.5 Vin (max) (V) 6.5 Vout (min) (V) 2.2 Vout (max) (V) 16 Iout (max) (A) 0.15 Features Power good, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.0086 Product type Processor and FPGA
Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 1 LDO 1 Vin (min) (V) 2.5 Vin (max) (V) 6.5 Vout (min) (V) 2.2 Vout (max) (V) 16 Iout (max) (A) 0.15 Features Power good, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.0086 Product type Processor and FPGA
WQFN (RSN) 32 16 mm² 4 x 4
  • Linear Charger
    • Three Charger Phases: Pre-Charge,
      Fast Charge, and Charge Termination
    • Externally Set Charge Current Which Supports
      up to 100 mA
    • LED Current Sinks for Power Good and Charger
      Status Indication
  • Low-Dropout Regulator (LDO) Supply for External
    Modules (Microcontroller, RF Module, IR Module)
    • LDO Continuous Output Current up to 30 mA
  • Boost Converter
    • Adjustable Output Voltage: 8 V to 16 V
    • Boost Output Internally Connected to H-Bridge
      Analog Switches
  • Full H-Bridge Analog Switches
    • Controlled by an External Microcontroller for
      System Operation
  • Output Pin for Divided Down Battery Voltage
    Useful for ADC or Comparator Input of an MCU
  • Linear Charger
    • Three Charger Phases: Pre-Charge,
      Fast Charge, and Charge Termination
    • Externally Set Charge Current Which Supports
      up to 100 mA
    • LED Current Sinks for Power Good and Charger
      Status Indication
  • Low-Dropout Regulator (LDO) Supply for External
    Modules (Microcontroller, RF Module, IR Module)
    • LDO Continuous Output Current up to 30 mA
  • Boost Converter
    • Adjustable Output Voltage: 8 V to 16 V
    • Boost Output Internally Connected to H-Bridge
      Analog Switches
  • Full H-Bridge Analog Switches
    • Controlled by an External Microcontroller for
      System Operation
  • Output Pin for Divided Down Battery Voltage
    Useful for ADC or Comparator Input of an MCU

The TPS65735 device is a power management unit (PMU) for active shutter 3D glasses consisting of an integrated power path, linear charger, LDO, boost converter, and full H-bridge analog switches for left and right shutter operation in a pair of active shutter 3D glasses. In addition to the power devices, a typical 3D glasses system contains both a microcontroller and a communications front end (IR, RF, or other) in order to handle the communication and synchronous operation along with a 3D television.

The TPS65735 device is a power management unit (PMU) for active shutter 3D glasses consisting of an integrated power path, linear charger, LDO, boost converter, and full H-bridge analog switches for left and right shutter operation in a pair of active shutter 3D glasses. In addition to the power devices, a typical 3D glasses system contains both a microcontroller and a communications front end (IR, RF, or other) in order to handle the communication and synchronous operation along with a 3D television.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS65835 활성 액티브 셔터 3D 안경용 MSP430이 통합된 고급 전원 관리 IC(PMIC) This product has an intergated MSP430 MCU.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기
유형 직함 날짜
* Data sheet TPS65735 PMU for Active Shutter 3D Glasses datasheet (Rev. A) PDF | HTML 2016/01/06
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
User guide TPS65735 System Eval Board User's Guide 2011/06/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RSN) 32 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상