홈 전원 관리 멀티 채널 IC(PMIC)
홈
전원 관리
멀티 채널 IC(PMIC)

TPS68470

활성

소형 카메라 모듈을 위한 플래시 LED 드라이버와 레퍼런스 클록 생성을 지원하는 PMIC(전원 관리 IC)

지금 주문
데이터 시트

TPS68470

활성
데이터 시트 지금 주문

제품 상세 정보

Processor supplier Generic Processor name Generic Regulated outputs (#) 8 Step-down DC/DC converter 1 Step-up DC/DC converter 1 LDO 6 Vin (min) (V) 2.97 Vin (max) (V) 3.63 Vout (min) (V) 0.875 Vout (max) (V) 3.1 Iout (max) (A) 1 Configurability Factory programmable, Software configurable Features Enable, Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) 0 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.1 Switching frequency (max) (kHz) 6000 Switching frequency (typ) (kHz) 5200 Product type Camera sensor
Processor supplier Generic Processor name Generic Regulated outputs (#) 8 Step-down DC/DC converter 1 Step-up DC/DC converter 1 LDO 6 Vin (min) (V) 2.97 Vin (max) (V) 3.63 Vout (min) (V) 0.875 Vout (max) (V) 3.1 Iout (max) (A) 1 Configurability Factory programmable, Software configurable Features Enable, Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) 0 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.1 Switching frequency (max) (kHz) 6000 Switching frequency (typ) (kHz) 5200 Product type Camera sensor
DSBGA (YFF) 56 10.7999999999999988 mm² 3 x 3.5999999999999996
  • High-Efficiency Buck Converter
    • Output Current up to 500 mA
    • Output Voltage Selectable: 0.9 V to 1.95 V
  • Dual Flash LED Driver
    • High-Efficiency Boost Converter
      • Adaptive Output Voltage Regulation Based on LED Vf
    • Low Side LED Current Drivers
      • Two 1-A Current Drivers
      • LED Temperature Monitoring
      • Open/Short LED Detection/Protection
      • Controlled LED Current Ramp-Up/Down
  • Linear Regulator for Sensor Analog Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 200 mA
  • Linear Regulator for IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for VCM (Voice Coil Motor) Driver Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 500 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for Sensor IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Clock Generation
    • Programmable PLL
    • Crystal Oscillator
  • I2C Interface
  • 7 GPIOs
  • System Reset
  • Operating Temperature Range: 0°C to 85°C
  • DSBGA with Package Height of 0.625 mm
  • High-Efficiency Buck Converter
    • Output Current up to 500 mA
    • Output Voltage Selectable: 0.9 V to 1.95 V
  • Dual Flash LED Driver
    • High-Efficiency Boost Converter
      • Adaptive Output Voltage Regulation Based on LED Vf
    • Low Side LED Current Drivers
      • Two 1-A Current Drivers
      • LED Temperature Monitoring
      • Open/Short LED Detection/Protection
      • Controlled LED Current Ramp-Up/Down
  • Linear Regulator for Sensor Analog Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 200 mA
  • Linear Regulator for IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for VCM (Voice Coil Motor) Driver Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 500 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for Sensor IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Clock Generation
    • Programmable PLL
    • Crystal Oscillator
  • I2C Interface
  • 7 GPIOs
  • System Reset
  • Operating Temperature Range: 0°C to 85°C
  • DSBGA with Package Height of 0.625 mm

The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates the clock for the image sensor, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators . The TPS68470 is capable of generating all needed power rails in a CCM.

The CORE voltage regulator is a state of the art buck converter which can be used for the image sensor digital supply. An LDO (LDO_ANA) can be used for the image sensor analog supply.

The TPS68470 also has a high efficiency boost converter to support two 1A LED flash drivers. The LED currents are controlled with regulated low side current sources.

The TPS68470 has five other LDOs. Two of them can be used for generic and sensor IO supply voltage generation (LDO_IO and LDO_S_IO). One can be dedicated to the VCM driver supply (LDO_VCM). The remaining two are auxiliary LDOs (LDO_AUX1 and LDO_AUX2).

The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates the clock for the image sensor, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators . The TPS68470 is capable of generating all needed power rails in a CCM.

The CORE voltage regulator is a state of the art buck converter which can be used for the image sensor digital supply. An LDO (LDO_ANA) can be used for the image sensor analog supply.

The TPS68470 also has a high efficiency boost converter to support two 1A LED flash drivers. The LED currents are controlled with regulated low side current sources.

The TPS68470 has five other LDOs. Two of them can be used for generic and sensor IO supply voltage generation (LDO_IO and LDO_S_IO). One can be dedicated to the VCM driver supply (LDO_VCM). The remaining two are auxiliary LDOs (LDO_AUX1 and LDO_AUX2).
filter 기타 멀티 채널 IC(PMIC) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
유형 직함 날짜
* Data sheet TPS68470 Power Management Unit with LED Flash Driver and Reference Clock Generation for Compact Camera Module (CCM) Applications datasheet (Rev. B) PDF | HTML 2017/01/19
Technical article Use PMICs to extend battery life in portable applications PDF | HTML 2016/09/08
EVM User's guide TPS68470EVM User's Guide 2014/09/10

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS68470EVM-089 — TPS68470EVM-089 평가 모듈

The TPS68470EVM-089 evaluation module is a fully assembled and tested circuit for evaluating the TPS68470 8-Channel Power Management IC.

사용 설명서: PDF
요청
거버(Gerber) 파일

TPS68470 EVM Design Files

SLVC664.ZIP (968 KB)
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFF) 56 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상