TPS786
- 1.5-A Low-Dropout Regulator With Enable
- Available in Fixed and Adjustable (1.2 V to 5.5 V)
Output Versions - High PSRR (49 dB at 10 kHz)
- Ultralow Noise (48 µVRMS, TPS78630)
- Fast Start-Up Time (50 µs)
- Stable With a 1-µF Ceramic Capacitor
- Excellent Load and Line Transient Response
- Very Low Dropout Voltage (390 mV at Full Load,
TPS78630) - 3 × 3 SON PowerPAD, 6-Pin SOT223 and 5-Pin
DDPAK Package - APPLICATIONS
- RF: VCOs, Receivers, ADCs
- Audio
- Bluetooth®, Wireless LAN
- Cellular and Cordless Telephones
- Handheld Organizers, PDAs
Bluetooth Is a trademark of Texas Instruments,
The TPS786 family of low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses in small outline, SOT223-6 and DDPAK-5 packages. Each device in the family is stable, with a small 1-µF ceramic capacitor on the output. The family uses an advanced, proprietary BiCMOS fabrication process to yield extremely low dropout voltages (for example, 390 mV at 1.5 A). Each device achieves fast start-up times (approximately 50 µs with a 0.001-µF bypass capacitor) while consuming very low quiescent current (265 µA, typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than 1 µA. The TPS78630 exhibits approximately 48 µVRMS of output voltage at 3-V output noise with a 0.1-µF bypass capacitor. Applications with analog components that are noise sensitive, such as portable RF electronics, benefit from the high PSRR, low noise features, and the fast response time.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS786 Ultralow-Noise, High-PSRR, Fast, RF, 1.5-A Low-Dropout Linear Regulators datasheet (Rev. M) | PDF | HTML | 2015/09/30 |
| White paper | Parallel LDO Architecture Design Using Ballast Resistors | PDF | HTML | 2022/12/14 | |
| White paper | Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast | PDF | HTML | 2022/12/13 | |
| Application note | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020/08/18 | |
| Application note | Using Thermal Calculation Tools for Analog Components (Rev. A) | 2019/08/30 | ||
| Application note | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017/08/09 | |
| EVM User's guide | TPS786/795/79601DRB EVM Users Guide (Rev. A) | 2016/09/09 | ||
| User guide | DEM-SOT223LDO Demonstration Fixture | 2003/10/15 | ||
| User guide | DEM-TO263LDO Demonstration Fixture | 2003/10/15 | ||
| EVM User's guide | 1.5 Amp, High PSRR, Low-Noise, Low Dropout Linear Regulator EVM | 2002/09/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-SOT223LDO — DEM-SOT223LDO 호환 최대 양극 출력 LDO(SOT223(DCQ) 패키지)
The Texas Instruments DEM-SOT223LDO demonstration module (DEM) helps designers evaluate the operation and performance of Texas Instruments low-dropout regulators (LDOs). This module is compatible with most positive output LDOs offered in the SOT223 (DCQ) package.
TPS78601DRBEVM — TPS78601 단일 출력 LDO용 평가 모듈
TIDEP0008 — PROFINET 통신 개발 플랫폼
TIDEP0003 — 이더넷/IP 통신 개발 플랫폼
TIDEP0002 — PROFIBUS 통신 개발 플랫폼
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-223 (DCQ) | 6 | Ultra Librarian |
| TO-263 (KTT) | 5 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.