전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS7A03

활성

빠른 과도 응답을 지원하는 나노전력 IQ 200nA 200mA 저손실(LDO) 전압 레귤레이터

제품 상세 정보

Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 6 Vin (min) (V) 1.5 Vout (max) (V) 5 Vout (min) (V) 0.8 Fixed output options (V) 0.9, 1, 1.2, 1.3, 1.5, 1.75, 1.8, 1.85, 2, 2.1, 2.2, 2.3, 2.5, 2.8, 2.9, 3, 3.1, 3.3, 3.6, 5 Noise (µVrms) 130 Iq (typ) (mA) 0.0002 Thermal resistance θJA (°C/W) 179.1, 201.1 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 PSRR at 100 KHz (dB) 35 Dropout voltage (Vdo) (typ) (mV) 205 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 6 Vin (min) (V) 1.5 Vout (max) (V) 5 Vout (min) (V) 0.8 Fixed output options (V) 0.9, 1, 1.2, 1.3, 1.5, 1.75, 1.8, 1.85, 2, 2.1, 2.2, 2.3, 2.5, 2.8, 2.9, 3, 3.1, 3.3, 3.6, 5 Noise (µVrms) 130 Iq (typ) (mA) 0.0002 Thermal resistance θJA (°C/W) 179.1, 201.1 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 PSRR at 100 KHz (dB) 35 Dropout voltage (Vdo) (typ) (mV) 205 Operating temperature range (°C) -40 to 125
DSBGA (YCH) 4 0.405769 mm² 0.637 x 0.637 SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8 X2SON (DQN) 4 1 mm² 1 x 1
  • Ultra-low IQ: 200 nA (typ), even in dropout
  • Shutdown IQ: 3 nA (typ)
  • Excellent transient response (1 mA to 50 mA)
    • < 10-µs settling time
    • 80-mV undershoot
  • Packages:
    • 1.0-mm × 1.0-mm X2SON
    • SOT23-5
    • 0.64-mm × 0.64-mm DSBGA
  • Input voltage range: 1.5 V to 6.0 V
  • Output voltage range: 0.8 V to 5.0 V (fixed)
  • Output accuracy: 1.5% over temperature
  • Smart enable pulldown
  • Very low dropout:
    • 270 mV (max) at 200 mA (VOUT = 3.3 V)
  • Stable with a 1-µF or larger capacitor
  • Ultra-low IQ: 200 nA (typ), even in dropout
  • Shutdown IQ: 3 nA (typ)
  • Excellent transient response (1 mA to 50 mA)
    • < 10-µs settling time
    • 80-mV undershoot
  • Packages:
    • 1.0-mm × 1.0-mm X2SON
    • SOT23-5
    • 0.64-mm × 0.64-mm DSBGA
  • Input voltage range: 1.5 V to 6.0 V
  • Output voltage range: 0.8 V to 5.0 V (fixed)
  • Output accuracy: 1.5% over temperature
  • Smart enable pulldown
  • Very low dropout:
    • 270 mV (max) at 200 mA (VOUT = 3.3 V)
  • Stable with a 1-µF or larger capacitor

The TPS7A03 is an ultra-small, ultra-low quiescent current low-dropout linear regulator (LDO) that can source 200 mA with excellent transient performance.

The TPS7A03, with an ultra-low IQ of 200 nA, is designed specifically for applications where very-low quiescent current is a critical parameter. This device maintains low IQ consumption even in dropout mode to further increase battery life. When in shutdown or disabled mode, the device consumes ultra-low, 3-nA IQ that helps increase the shelf life of the battery. The TPS7A03 has an output range of 0.8 V to 5.0 V available in 50-mV steps to support the lower core voltages of modern microcontrollers (MCUs).

The TPS7A03 features a smart enable circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps minimize the external components used to pulldown the EN pin. This circuit also helps minimize the current drawn through the external pulldown circuit when the device is enabled.

The TPS7A03 is fully specified for TJ = –40°C to +125°C operation.

The TPS7A03 is an ultra-small, ultra-low quiescent current low-dropout linear regulator (LDO) that can source 200 mA with excellent transient performance.

The TPS7A03, with an ultra-low IQ of 200 nA, is designed specifically for applications where very-low quiescent current is a critical parameter. This device maintains low IQ consumption even in dropout mode to further increase battery life. When in shutdown or disabled mode, the device consumes ultra-low, 3-nA IQ that helps increase the shelf life of the battery. The TPS7A03 has an output range of 0.8 V to 5.0 V available in 50-mV steps to support the lower core voltages of modern microcontrollers (MCUs).

The TPS7A03 features a smart enable circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps minimize the external components used to pulldown the EN pin. This circuit also helps minimize the current drawn through the external pulldown circuit when the device is enabled.

The TPS7A03 is fully specified for TJ = –40°C to +125°C operation.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
TPS7A02 활성 200mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable Lower quiescent current
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS7A05 활성 200mA, ultra-low-IQ, high-accuracy, low-dropout voltage regulator with enable Alternative with slightly higher IQ

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기
유형 직함 날짜
* Data sheet TPS7A03 Nanopower IQ, 200-nA, 200-mA, Low-Dropout Voltage Regulator With Fast Transient Response datasheet (Rev. C) PDF | HTML 2022/09/27
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021/02/18
Technical article Overcoming common design challenges in an UV sterilization box system PDF | HTML 2020/07/27
Technical article Accelerate your electric mask design PDF | HTML 2020/07/01
Application brief No Tradeoffs: Linear Power Supplies for Ultra-Low Power and Dynamic Performance 2020/02/06
Analog Design Journal Using power solutions to extend battery life in MSP430(TM) MCU applications (Rev. A) 2019/09/11
Technical article LDO basics: introduction to quiescent current PDF | HTML 2018/06/20

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

MULTIPKGLDOEVM-823 — DBV, DRB, DRV 및 DQN 패키지용 범용 LDO 선형 전압 레귤레이터 평가 모듈

TI MULTIPKGLDOEVM-823 평가 모듈(EVM)은 회로 애플리케이션에서 사용할 수 있는 몇 가지 일반적인 선형 레귤레이터 패키지의 작동과 성능을 평가하는 데 도움이 됩니다. 이 특정 EVM 구성에는 사용자를 위한 DRB, DRV, DQN 및 DBV 풋프린트가 있으며 저손실(LDO) 레귤레이터를 납땜하고 평가할 수 있습니다.

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS7A0x CORE PSPICE Model

SBVM950.ZIP (15 KB) - PSpice Model
레퍼런스 디자인

TIDA-010224 — 배터리 수명 연장을 위한 저전력 무선 카메라 레퍼런스 디자인

이 레퍼런스 설계는 업계 최고의 이미지 처리, 커넥티비티, 센서 및 전력을 결합하여 배터리 작동 무선 카메라용 솔루션을 제공합니다. 고효율 전력 컨버터와 최적화된 시스템 아키텍처는 배터리 수명을 늘려줍니다. 이미지
Wi-Fi® 연결 디바이스가 포함된 프로세서를 사용하면 안전한 고품질 라이브 비디오 스트리밍 및 양방향 오디오 스트리밍으로 잡음 감소 및 음향 반향 제거 기능을 구현할 수 있습니다. 이 설계에는 나이트 비전 기능을 지원하는 적외선(IR) LED 및 IR 차단 필터가 포함되어 있습니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YCH) 4 Ultra Librarian
SOT-23 (DBV) 5 Ultra Librarian
X2SON (DQN) 4 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상