TPS7A6650H-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature: –40°C to 150°C
Ambient Operating Temperature Range - Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4
- Device Temperature: –40°C to 150°C
- 4-V to 40-V Wide Vin Input Voltage Range With
up to 45-V Transient - Output Current: 50 mA
- Low Quiescent Current, I(q):
- 2 µA when EN = Low (Shutdown Mode)
- 12 µA Typical at Light Loads
- Low ESR Ceramic Output Stability Capacitor
(2.2 µF–100 µF) - 130-mV Dropout Voltage at 50 mA
(Typical, V(Vin) = 4 V) - Fixed 5-V Output Voltage
- Low Input Voltage Tracking
- Integrated Power-On Reset
- Programmable Reset-Pulse Delay
- Open-Drain Reset Output
- Integrated Fault Protection
- Thermal Shutdown
- Short-Circuit Protection
- 8-Pin MSOP-DGN Package
The TPS7A6650H-Q1 is a low-dropout linear regulator designed for up to 40-V Vin operations. With only 12-µA quiescent current at no load, it is quite suitable for standby microprocessor control-unit systems, especially in automotive applications.
The device features integrated short-circuit and overcurrent protection. The device implements reset delay on power up to indicate the output voltage is stable and in regulation. One can program the delay with an external capacitor. A low-voltage tracking feature allows for a smaller input capacitor and can possibly eliminate the need of using a boost converter during cold-crank conditions.
The device operates in the –40°C to 150°C temperature range, which makes it well suited for power supplies in various automotive applications.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS7A6650H-Q1 40-V, Ultralow-I(q), 150°C-Ambient-Temperature Regulator datasheet | PDF | HTML | 2015/12/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
HVSSOP (DGN) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.