TPS7H4104-SEP
- Total ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) availability up to 100krad(Si)
- Single-event effects (SEE) characterized
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75 MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
- Input voltage range from 3V to 7V
- Up to 3A of maximum output current per channel or more when channels are paralleled
- Typical efficiency of 91.1% (typ.) at VIN = 5V, VOUT = 1.8V, IOUT = 1A at fSW = 500kHz
- Integrated 62mΩ (HS) and 55mΩ (LS) MOSFETs (typ. at VIN = 5V)
- Flexible switching frequency:
- 100kHz to 1MHz, internal oscillator
- External synchronization capability
- Accurate voltage reference of 599.48mV ± 1% over line, temperature, and TID
- Monotonic start-up into pre-biased outputs
- Per channel (CHx)
- Adjustable slope compensation (RSCx)
- Adjustable soft-start (SS_TRx)
- Power-good output monitor for undervoltage and overvoltage (PWRGDx)
- Input enable (ENx)
- Sequence up and reverse sequence down when using EN_SEQ (only valid for TPS7H4104)
- Plastic packages outgas tested per ASTM E595
- Available in military (–55°C to 125°C) temp range
The TPS7H4104 and TPS7H4102 are 7V, 3A per channel, multichannel, peak-current mode, synchronous buck converters optimized for use in area sensitive, space environment applications. The device incorporates four (TPS7H4104) or two (TPS7H4102) identical channels that can be use to step down the power input voltage into independent voltages up to 3A per phase or interleaved to increment the output current up to 12A (TPS7H4104) or 6A (TPS7H4102).
Each channel incorporate the high and low side power MOSFETs with programmable soft-start and slope compensation. Additionally, per channel power-good flags and enable signals are provided. The TPS7H4104 also incorporates an input (EN_SEQ) to create a sequential power up and reverse sequence down.
Various current limit mechanisms are included for robust current limiting during fault conditions. Thermal shutdown disables the device when the die temperature exceeds thermal limit.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7H4104EVM — TPS7H4104 evaluation module
The TPS7H4104 evaluation module (EVM) is optimized for 5V input voltage with four separate 3A outputs. Each converter is set-up separately so the board has a 0.8V output, a 1.2V output, a 1.5V output and a 1.8V output.
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
HTQFP (PAP) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치