TPSM82913E
- Low output noise < 20 µVRMS(100 Hz to 100 kHz)
- Low output voltage ripple < 10 µVRMS after ferrite bead
- High PSRR of > 65 dB (up to 100 kHz)
- 2.2-MHz or 1-MHz fixed frequency peak current mode control
- Synchronizable with external clock (optional)
- Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
- Spread spectrum modulation (optional)
- 3.0-V to 17-V input voltage range
- 0.8-V to 5.5-V output voltage range
- 57-mΩ/20-mΩ RDSon
- Output voltage accuracy of ±1%
- Precise enable input allows
- User-defined undervoltage lockout
- Exact sequencing
- Adjustable soft start
- Power-good output
- Output discharge (optional)
- –40°C to 125°C junction temperature range
- –55°C to 125°C for -ET versions
- Create a custom design using the TPSM8291x with the WEBENCH Power Designer
The TPSM8291x devices are a family of high-efficiency, low-noise and low-ripple current mode synchronous buck power modules. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.
The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz and can be synchronized to an external clock.
To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This feature allows an output voltage ripple below 10 µVRMS.
Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with an integrated capacitor on the NR/SS pin. An external capacitor can be added to the module for additional filtering.
The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPSM8291x 3-V to 17-V, 2-A/3-A Low-Noise and Low-Ripple Buck Power Module with Integrated Ferrite Bead Filter Compensation datasheet (Rev. C) | PDF | HTML | 2023/07/18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPSM82913EVM — 3A 저잡음 및 저리플 벅 모듈용 TPSM82913 평가 모듈
TPSM8291xEVM(BSR213)은 소형 4.5mm x 5.5mm QFN 패키지로 TPSM8291x 2A 및 3A 핀 대 핀 호환 저잡음(<20μVRMS) 및 낮은 리플(<10μVRMS) 벅 전원 모듈의 평가를 용이하게 합니다. BSR213-001은 3A TPSM82913을 사용하여 3V~17V 사이의 입력 전압에서 1.2V 출력 전압을 출력합니다. BSR213-002는 2A TPSM82912를 사용하여 최대 17V의 입력 전압에서 3.3V 출력 전압을 출력합니다
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
B0QFN (RDU) | 28 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치