전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC24624

활성

LLC 컨버터를 위한 고주파 듀얼 동기 정류기 컨트롤러

제품 상세 정보

Vin (max) (V) 26 Operating temperature range (°C) -40 to 125 Control mode VDS sensing Topology LLC Rating Catalog Features Automatic Standby Mode, Dual Channel, Proportional gate drive, Synchronous Rectifier, USB C/PD compatible
Vin (max) (V) 26 Operating temperature range (°C) -40 to 125 Control mode VDS sensing Topology LLC Rating Catalog Features Automatic Standby Mode, Dual Channel, Proportional gate drive, Synchronous Rectifier, USB C/PD compatible
SOIC (D) 8 29.4 mm² 4.9 x 6
  • 230-V VD pins rating
  • 23-ns turn-off delay to support LLC operating above resonant frequency and up to 625-kHz switching frequency
  • Proportional gate drive to extend the SR conduction time
  • Adjustable turn-off threshold for minimum body diode conduction
  • Automatic standby mode detection with 180 µA of low standby current
  • Wide 4.25-V to 26-V VDD operation range with internal clamp
  • Adaptive turn-on delay for better DCM ring rejection
  • Two-channel interlock to prevent shoot-through
  • Integrated 1.5-A source and 4-A sink capability gate driver for N-channel MOSFETs
  • 8-pin SOIC package
  • 230-V VD pins rating
  • 23-ns turn-off delay to support LLC operating above resonant frequency and up to 625-kHz switching frequency
  • Proportional gate drive to extend the SR conduction time
  • Adjustable turn-off threshold for minimum body diode conduction
  • Automatic standby mode detection with 180 µA of low standby current
  • Wide 4.25-V to 26-V VDD operation range with internal clamp
  • Adaptive turn-on delay for better DCM ring rejection
  • Two-channel interlock to prevent shoot-through
  • Integrated 1.5-A source and 4-A sink capability gate driver for N-channel MOSFETs
  • 8-pin SOIC package

The UCC24624 high-performance synchronous rectifier (SR) controller is dedicated for LLC resonant converters to replace the lossy diode output rectifiers with SR MOSFETs and improve the overall system efficiency.

The UCC24624 SR controller uses drain-to-source voltage sensing method to achieve on and off control of the SR MOSFET. Proportional gate drive is implemented to extend the SR conduction time, minimize the body diode conduction time. To compensate for the offset voltage caused by the SR MOSFET parasitic inductance, the UCC24624 implements an adjustable positive turn-off threshold to accommodate different SR MOSFET packages. UCC24624 has a built-in 475-ns on-time blanking and a fixed 650-ns off-time blanking to avoid SR false turn-on and turn-off. UCC24624 also integrates a two-channel interlock function that prevents the two SRs from being on at the same time. With 230-V voltage-sensing pins and 28-V ABS maximum VDD rating, it can be directly used in converters with output voltage up to 24.75 V. The internal clamp allows the controller to support 36-V output voltage easily by adding an external current limiting resistor on VDD.

space

The UCC24624 high-performance synchronous rectifier (SR) controller is dedicated for LLC resonant converters to replace the lossy diode output rectifiers with SR MOSFETs and improve the overall system efficiency.

The UCC24624 SR controller uses drain-to-source voltage sensing method to achieve on and off control of the SR MOSFET. Proportional gate drive is implemented to extend the SR conduction time, minimize the body diode conduction time. To compensate for the offset voltage caused by the SR MOSFET parasitic inductance, the UCC24624 implements an adjustable positive turn-off threshold to accommodate different SR MOSFET packages. UCC24624 has a built-in 475-ns on-time blanking and a fixed 650-ns off-time blanking to avoid SR false turn-on and turn-off. UCC24624 also integrates a two-channel interlock function that prevents the two SRs from being on at the same time. With 230-V voltage-sensing pins and 28-V ABS maximum VDD rating, it can be directly used in converters with output voltage up to 24.75 V. The internal clamp allows the controller to support 36-V output voltage easily by adding an external current limiting resistor on VDD.

space

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
10개 모두 보기
유형 직함 날짜
* Data sheet UCC24624 Dual-Channel Synchronous Rectifier Controller for LLC Resonant Converters datasheet (Rev. C) PDF | HTML 2022/02/28
Technical article 고주파 공진 컨버터 설계 고려 사항, 2부 PDF | HTML 2024/03/15
Application note Configs of Secondary Rectifier Circuit for LLC Resonant Converter Using UCC24624 PDF | HTML 2021/12/21
Application note Design Considerations With Dual-Channel SR Controller UCC24624 2020/06/04
Technical article How to reduce audible noise and power consumption at standby in your AC/DC design PDF | HTML 2020/04/22
EVM User's guide PFCLLCSREVM-034 User Guide 2019/07/26
Technical article Three considerations for achieving high efficiency and reliability in industrial A PDF | HTML 2019/04/04
EVM User's guide The UCC24624EVM-015 LLC Gate Driver Evaluation Module (Rev. A) 2018/12/04
Application note Improving ZVS and efficiency in LLC converters 2018/11/05
Application brief Boosting LLC Resonant Converter Efficiency by Using the UCC24624 2018/10/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

PFCLLCSREVM034 — UCC28056B, UCC256404 및 UCC24624를 지원하는 AC-절연 DC EVM

PFCLLCSREVM034 is a 168-W AC/DC supply with a transition-mode power-factor-correction front end and isolated half-bridge LLC resonant converter with synchronous rectification. This EVM accepts AC input from 90 Vrms to 264 Vrms and outputs 12-V DC with 168-W full-load output power.

사용 설명서: PDF
TI.com에서 구매 불가
도터 카드

UCC24624EVM — UCC24624 LLC 게이트 드라이버 평가 모듈

The UCC24624EVM-015 evaluation module (EVM) is used to convert the output rectifier of a LLC converter from diodes to synchronous rectifiers (SR) FETs to investigate and evaluate the efficiency benefits of using an SR over a rectifier diode.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

UCC24624 SIMPLIS Model (Rev. A)

SLUM645A.ZIP (1115 KB) - SIMPLIS Model
레퍼런스 디자인

TIDA-010080 — 5G 텔레콤 정류기를 위한 500W, >94.5% 효율성 아날로그 제어 AC/DC 레퍼런스 디자인

48V DC, 500W 출력을 갖춘 이 소형 고효율 레퍼런스 설계는 5G 텔레콤 전원 및 산업용 AC/DC 전원 공급 장치를 대상으로 합니다. 이 회로는 UCC28180 기반의 프론트 엔드 CCM(연속 전도 모드) PFC(역률 보정) 회로와 UCC256403을 기반으로 하는 절연 DC/DC 컨버터를 위한 견고한 LLC 스테이지로 구성됩니다. 고효율 요구 사항을 위해 UCC24624는 동기 정류를 처리합니다. 이 설계에서는 내부 고전압 MOSFET이 있는 UCC28911이 포함된 보조 전원 공급 장치 플라이백을 사용합니다. 이 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010081 — 5G 텔레콤 정류기를 위한 >95% 효율, 1kW 아날로그 제어 AC/DC 레퍼런스 설계

This compact, high efficiency reference design with a 54-V DC, 1000-W output targets 5G telecom power and industrial AC/DC power supplies. The circuit consists of a front-end continuous conduction mode (CCM) power factor correction (PFC) circuit based on the UCC28180, followed by a robust LLC (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

PMP21683 — 48V/550W 공진 컨버터 레퍼런스 설계

This resonant converter reference design takes a 380-V to 420-V DC input and generates a 48-V up to 550-W output. With the UCC256302 driver-integrated resonant converter controller and UCC24624, a two-channel synchronous rectifier (SR) driver, this design can achieve 97.95% peak efficiency.
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상