홈 전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)
홈
전원 관리
AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC25706-Q1

구형

차량용 8V~15V, 최대 4MHz 전압 모드 PWM 컨트롤러

지금 주문
데이터 시트

UCC25706-Q1

구형
데이터 시트 지금 주문

제품 상세 정보

Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward, Voltage Topology Boost, Flyback, Forward Rating Automotive Duty cycle (max) (%) 93
Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward, Voltage Topology Boost, Flyback, Forward Rating Automotive Duty cycle (max) (%) 93
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Qualified for Automotive Applications
  • Greater Than 4-MHz Operation
  • Integrated Oscillator / Voltage Feed Forward
    Compensation
  • >4:1 Input Voltage Range
  • 25-ns Current Limit Delay
  • Programmable Maximum Duty Cycle Clamp
  • Optocoupler Interface
  • 50-µA Start-Up Current
  • 4.2-mA Operating Current at 1 MHz
  • Latch-Up Exceeds 100mA per JESD78 Class I
  • Smallest Footprint of the 8-pin MSOP
    Package Minimizes Board Area and Height
  • Qualified for Automotive Applications
  • Greater Than 4-MHz Operation
  • Integrated Oscillator / Voltage Feed Forward
    Compensation
  • >4:1 Input Voltage Range
  • 25-ns Current Limit Delay
  • Programmable Maximum Duty Cycle Clamp
  • Optocoupler Interface
  • 50-µA Start-Up Current
  • 4.2-mA Operating Current at 1 MHz
  • Latch-Up Exceeds 100mA per JESD78 Class I
  • Smallest Footprint of the 8-pin MSOP
    Package Minimizes Board Area and Height

The UCC25705-Q1 and UCC25706-Q1 devices are 8-pin voltage mode primary side controllers with fast over-current protection. These devices are used as core high-speed building blocks in high performance isolated and non-isolated power converters.

UCC25705-Q1/UCC25706-Q1 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25 ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle.

Two UVLO options are offered. The UCC25705-Q1 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC25706-Q1 is better suited for offline applications.

The UCC2570x-Q1 family is offered in an 8-pin SOIC (D) package.

The UCC25705-Q1 and UCC25706-Q1 devices are 8-pin voltage mode primary side controllers with fast over-current protection. These devices are used as core high-speed building blocks in high performance isolated and non-isolated power converters.

UCC25705-Q1/UCC25706-Q1 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25 ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle.

Two UVLO options are offered. The UCC25705-Q1 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC25706-Q1 is better suited for offline applications.

The UCC2570x-Q1 family is offered in an 8-pin SOIC (D) package.
filter 기타 AC/DC 및 DC/DC 컨트롤러(외장 FET) 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet High-Speed Voltage Mode Pulse Width Modulator - datasheet 2011/05/05

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치