Home Interface USB ICs USB redrivers & multiplexers
Home
Interface
USB ICs
USB redrivers & multiplexers

SN65LVPE502A

NOT RECOMMENDED FOR NEW DESIGNS

1st generation dual channel USB 3.0 redriver

Order now
Data sheet
SN65LVPE502A is not recommended for new designs
This product continues to be available for existing customers. New designs should consider an alternate product.
open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TUSB522P ACTIVE Fourth generation dual-channel USB 3.0 redriver This product complies to newer USB specifications

SN65LVPE502A

NOT RECOMMENDED FOR NEW DESIGNS
Data sheet Order now

Product details

Type Redriver Function USB 3.0 USB speed (Mbps) 5000 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85
Type Redriver Function USB 3.0 USB speed (Mbps) 5000 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85
  • Single-Lane USB 3.0 Redriver and Equalizer
  • Selectable Equalization, De-Emphasis and Output Swing Control
  • Integrated Termination
  • Hot-Plug Capable
  • Low Active Power (U0 state):
    • 315 mW (Typical), VCC = 3.3 V
  • USB 3.0 Low Power Support:
    • 7 mW (Typical) When No Connection Detected
    • 70 mW (Typical) When Link in U2/U3 Mode
  • Excellent Jitter and Loss Compensation Capability:
    • >40 in of Total 4 mil Stripline on FR4
  • Small Footprint, 3 mm × 3 mm and 4 mm × 4 mm, 24-Pin VQFN Packages
  • High Protection Against ESD Transient:
    • HBM: 5,000 V
    • CDM: 1,500 V
    • MM: 200 V
  • Single-Lane USB 3.0 Redriver and Equalizer
  • Selectable Equalization, De-Emphasis and Output Swing Control
  • Integrated Termination
  • Hot-Plug Capable
  • Low Active Power (U0 state):
    • 315 mW (Typical), VCC = 3.3 V
  • USB 3.0 Low Power Support:
    • 7 mW (Typical) When No Connection Detected
    • 70 mW (Typical) When Link in U2/U3 Mode
  • Excellent Jitter and Loss Compensation Capability:
    • >40 in of Total 4 mil Stripline on FR4
  • Small Footprint, 3 mm × 3 mm and 4 mm × 4 mm, 24-Pin VQFN Packages
  • High Protection Against ESD Transient:
    • HBM: 5,000 V
    • CDM: 1,500 V
    • MM: 200 V

The SN65LVPE502x devices are dual-channel, single-lane USB 3.0 redriver and signal conditioners supporting data rates of 5 Gbps. The devices comply with USB 3.0 specification revision 1.0 supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.

The SN65LVPE502x devices are dual-channel, single-lane USB 3.0 redriver and signal conditioners supporting data rates of 5 Gbps. The devices comply with USB 3.0 specification revision 1.0 supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.
filter Find other USB redrivers & multiplexers
Download

Special Note

The SN65LVPE502A and SN65LVPE502B offer two different pinouts for layout flexibility. All errata for the previous part, SN65LVPE502CP, are fixed in these devices. Smaller 3mm x 3mm package option available.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet SN65LVPE502x Dual-Channel USB 3.0 Redriver and Equalizer datasheet (Rev. C) PDF | HTML 11 Nov 2016

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location