LMH6702QML-SP

現行

1.7 GHz、超低失真、寬頻運算放大器

產品詳細資料

Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1700 BW at Acl (MHz) 1700 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3100 Vn at flatband (typ) (nV√Hz) 1.83 Vn at 1 kHz (typ) (nV√Hz) 4.5 Iq per channel (typ) (mA) 12.5 Vos (offset voltage at 25°C) (max) (mV) 4.5 Rail-to-rail No Rating Space Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 48 Input bias current (max) (pA) 15000000 Offset drift (typ) (µV/°C) 13 Iout (typ) (mA) 80 2nd harmonic (dBc) 52 3rd harmonic (dBc) 62 Frequency of harmonic distortion measurement (MHz) 20 Radiation, TID (typ) (krad) 300 Radiation, SEL (MeV·cm2/mg) Bipolar
Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1700 BW at Acl (MHz) 1700 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3100 Vn at flatband (typ) (nV√Hz) 1.83 Vn at 1 kHz (typ) (nV√Hz) 4.5 Iq per channel (typ) (mA) 12.5 Vos (offset voltage at 25°C) (max) (mV) 4.5 Rail-to-rail No Rating Space Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 48 Input bias current (max) (pA) 15000000 Offset drift (typ) (µV/°C) 13 Iout (typ) (mA) 80 2nd harmonic (dBc) 52 3rd harmonic (dBc) 62 Frequency of harmonic distortion measurement (MHz) 20 Radiation, TID (typ) (krad) 300 Radiation, SEL (MeV·cm2/mg) Bipolar
CDIP (NAB) 8 79.9592 mm² 10.16 x 7.87 CFP (NAC) 10 62.9285 mm² 9.91 x 6.35
  • VS = ±5V, TA = 25°C, AV = +2V/V, RL = 100Ω, VOUT = 2VPP, typical unless noted otherwise
  • Available with radiation ensurance
    • High dose rate 300krad(Si)
    • ELDRS free 300krad(Si)
  • −3dB bandwidth (VOUT = 0.2VPP) 720MHz
  • Low noise 1.83nV/√Hz
  • Fast settling to 0.1% 13.4ns
  • Fast slew rate 3100V/µs
  • Supply current 12.5mA
  • Output current 80mA
  • Low intermodulation distortion (75MHz) −67dBc
  • Improved replacement for CLC409 and CLC449
  • VS = ±5V, TA = 25°C, AV = +2V/V, RL = 100Ω, VOUT = 2VPP, typical unless noted otherwise
  • Available with radiation ensurance
    • High dose rate 300krad(Si)
    • ELDRS free 300krad(Si)
  • −3dB bandwidth (VOUT = 0.2VPP) 720MHz
  • Low noise 1.83nV/√Hz
  • Fast settling to 0.1% 13.4ns
  • Fast slew rate 3100V/µs
  • Supply current 12.5mA
  • Output current 80mA
  • Low intermodulation distortion (75MHz) −67dBc
  • Improved replacement for CLC409 and CLC449

The LMH6702QML-SP is a very wideband, dc-coupled, monolithic operational amplifier designed specifically for wide-dynamic-range systems requiring exceptional signal fidelity. Benefiting from TI’s current-feedback architecture, the LMH6702QML-SP offers unity gain stability at exceptional speed without need for external compensation.

With a 720MHz bandwidth (AV = 2V/V, VO = 2VPP), 10-bit distortion levels through 60MHz (RL = 100Ω), 1.83nV/√Hz input-referred noise, and 12.5mA supply current, the LMH6702QML-SP is an excellent driver or buffer for high-speed flash analog-to-digital (A/D) and digital-to-analog (D/A) converters.

The LMH6702QML-SP benefits wide dynamic range systems, such as radar and communication receivers, that require a wideband amplifier offering exceptional signal purity. The low input-referred noise and low harmonic and intermodulation distortion make this device an excellent choice for high-speed applications.

The LMH6702QML-SP is constructed using TI’s VIP10 complimentary bipolar process and TI’s proven current-feedback architecture.

The LMH6702QML-SP is a very wideband, dc-coupled, monolithic operational amplifier designed specifically for wide-dynamic-range systems requiring exceptional signal fidelity. Benefiting from TI’s current-feedback architecture, the LMH6702QML-SP offers unity gain stability at exceptional speed without need for external compensation.

With a 720MHz bandwidth (AV = 2V/V, VO = 2VPP), 10-bit distortion levels through 60MHz (RL = 100Ω), 1.83nV/√Hz input-referred noise, and 12.5mA supply current, the LMH6702QML-SP is an excellent driver or buffer for high-speed flash analog-to-digital (A/D) and digital-to-analog (D/A) converters.

The LMH6702QML-SP benefits wide dynamic range systems, such as radar and communication receivers, that require a wideband amplifier offering exceptional signal purity. The low input-referred noise and low harmonic and intermodulation distortion make this device an excellent choice for high-speed applications.

The LMH6702QML-SP is constructed using TI’s VIP10 complimentary bipolar process and TI’s proven current-feedback architecture.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 10
類型 標題 日期
* Data sheet LMH6702QML-SP 1.7GHz, Ultra-Low-Distortion, Wideband Op Amp datasheet (Rev. F) PDF | HTML 2024年 8月 22日
* SMD LMH6702QML-SP SMD 5962-02546 2016年 6月 21日
* Radiation & reliability report LMH6702xFQMLV ELDRS Report 2012年 5月 14日
Application brief DLA Approved Optimizations for QML Products (Rev. B) PDF | HTML 2024年 10月 23日
Selection guide TI Space Products (Rev. J) 2024年 2月 12日
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 2023年 8月 31日
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 2022年 11月 17日
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022年 10月 19日
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 2022年 3月 7日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
CDIP (NAB) 8 Ultra Librarian
CFP (NAC) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片