首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器
最新

MCT8316A-Q1

現行

車用 40V 最大值、8A 峰值、無感測梯形控制 3 相位 BLDC 馬達驅動器

立即訂購
產品規格表

MCT8316A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Architecture Integrated FET Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 120 or 150 degree modulation for improved acoustic performance, Active Demag to reduce power losses, Code-free high speed sensored trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Integrated FET Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 120 or 150 degree modulation for improved acoustic performance, Active Demag to reduce power losses, Code-free high speed sensored trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports upto 3kHz (electrical frequency)
    • Very fast startup time (<50ms)
    • Fast Deceleration (<150ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Active Demagnetization to reduce power losses
    • Configurable motor startup and stop options
    • Optional closed loop speed control
    • Anti-voltage surge protections prevents overvoltage
    • Variable monitoring through DACOUT
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • 95mΩ RDS(ON) (HS + LS) at TA = 25°C
  • Low power sleep mode
    • 3µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 100kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistor
  • Built-in 3.3V ±5%, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (5 different types)
    • Overcurrent protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports upto 3kHz (electrical frequency)
    • Very fast startup time (<50ms)
    • Fast Deceleration (<150ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Active Demagnetization to reduce power losses
    • Configurable motor startup and stop options
    • Optional closed loop speed control
    • Anti-voltage surge protections prevents overvoltage
    • Variable monitoring through DACOUT
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • 95mΩ RDS(ON) (HS + LS) at TA = 25°C
  • Low power sleep mode
    • 3µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 100kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistor
  • Built-in 3.3V ±5%, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (5 different types)
    • Overcurrent protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCT8316A-Q1 provides a single-chip, code-free sensorless trapezoidal device for customers requiring high speed operation (up to 3kHz electrical) or very fast startup time (<50ms) for 12 to 24V brushless-DC motors up to 8A peak current. The MCT8316A-Q1 integrates three 1/2-H bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side). Power management features of an adjustable buck regulator and LDO generate the 3.3V or 5.0V voltage rails for the device and can be used to power external circuits.

Sensorless trapezoidal control is highly configurable ranging from motor start-up behavior to closed loop operation through register settings. These settings can be saved in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8316A-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCT8316A-Q1 provides a single-chip, code-free sensorless trapezoidal device for customers requiring high speed operation (up to 3kHz electrical) or very fast startup time (<50ms) for 12 to 24V brushless-DC motors up to 8A peak current. The MCT8316A-Q1 integrates three 1/2-H bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side). Power management features of an adjustable buck regulator and LDO generate the 3.3V or 5.0V voltage rails for the device and can be used to power external circuits.

Sensorless trapezoidal control is highly configurable ranging from motor start-up behavior to closed loop operation through register settings. These settings can be saved in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8316A-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet MCT8316A-Q1 High Speed Sensorless Trapezoidal Control Integrated FET BLDC Driver datasheet PDF | HTML 2024年 5月 8日
Application brief MCx8316x for Vacuum Robot Applications PDF | HTML 2022年 9月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCT8316AEVM — 適用三相無感測器梯形 BLDC 馬達驅動器的 MCT8316A 評估模組

MCT8316A 為三個半全橋整合式 MOSFET 驅動器，適用 4.5-V 至 35-V、8-A 尖峰電流驅動之三相無刷 DC (BLDC) 馬達的無感測器梯形控制。MCT8316A 整合降壓穩壓器，可透過可編程穩壓電源支援 200-mA。EVM 包括板載 MSP430、MSP430FR2355，可用做與 MCT8316AEVM GUI 的介面。
使用指南: PDF | HTML
TI.com 無法提供
計算工具

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
支援產品和硬體

支援產品和硬體

產品
BLDC 驅動器
DRV8311 — 具有整合式 FET 的最大 24-V abs、3 至 20-V、三相無刷 DC 馬達驅動器 DRV8316 — 具整合式電流感測和整合式 FET 的 40-V 最大 8-A 峰值 3 相馬達驅動器 DRV8316-Q1 — 具有整合式電流感測的車用 40-V 最大值 8-A 峰值三相馬達驅動器 DRV8316C — 具整合式電流感測、FET 和強化 CSA 規格的 40-V 最大 8-A 峰值 3 相馬達驅動器 DRV8316C-Q1 — 具有整合式電流感測的車用 40-V 最大值 8-A 峰值三相馬達驅動器 DRV8317 — 具有整合式 FET 和電流感測的 24-V 最大值 5-A 峰值三相馬達驅動器
整合式控制 BLDC 驅動器
MCF8316A — 40-V 最大值、8-A 峰值無感測器 FOC 控制 3 相 BLDC 馬達驅動器 MCF8316C-Q1 — 車用、40-V 最大值、8-A 峰值、無感測器磁場定向控制 (FOC) 3 相 BLDC 馬達驅動器 MCT8316A — 40-V 最大值、8-A 峰值、無感測器梯形控制 3 相 BLDC 馬達驅動器 MCT8316A-Q1 — 車用 40V 最大值、8A 峰值、無感測梯形控制 3 相位 BLDC 馬達驅動器 MCT8316Z — 40-V 最大值、8-A 峰值、感測梯形波控制 3 相 BLDC 馬達驅動器 MCT8316Z-Q1 — 汽車 40-V 最大值、8-A 峰值、感測梯形控制 3 相 BLDC 馬達驅動器
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGF) 40 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片