SN55173

現行

四路差分線路接收器

立即訂購

產品規格表

document-pdfAcrobat SNx5173 Quadruple Differential Line Receivers datasheet (Rev. F) (英文) PDF | HTML

SN55173

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Military

Operating temperature range (°C)

-55 to 125

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Military

Operating temperature range (°C)

-55 to 125

CDIP (J)

16

135.3552 mm² 19.56 x 6.92

Meet or exceed the requirements of TIA/EIA-422-B, TIA/EIA-423-B, and TIA/EIA-485-A and ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-State outputs
Common-mode input voltage range of –12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50 mV typical
High Input Impedance : 12 kΩ minimum
Operate from single 5-V supply
Low power requirements
Pin-to-pin replacement for AM26LS32

Meet or exceed the requirements of TIA/EIA-422-B, TIA/EIA-423-B, and TIA/EIA-485-A and ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-State outputs
Common-mode input voltage range of –12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50 mV typical
High Input Impedance : 12 kΩ minimum
Operate from single 5-V supply
Low power requirements
Pin-to-pin replacement for AM26LS32

The SN55173 and SN75173 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. These devices feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common-mode input voltage range of – 12 V to 12 V. Fail-safe design specifies that if the inputs are open circuited, the outputs are always high. The SN65173 and SN75173 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers.

The SN55173 is characterized over the full military temperature range of – 55°C to 125°C. The SN75173 is characterized for operation from 0°C to 70°C.

The SN55173 and SN75173 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. These devices feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common-mode input voltage range of – 12 V to 12 V. Fail-safe design specifies that if the inputs are open circuited, the outputs are always high. The SN65173 and SN75173 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers.

The SN55173 is characterized over the full military temperature range of – 55°C to 125°C. The SN75173 is characterized for operation from 0°C to 70°C.

filter

尋找其它 RS-485 & RS-422 收發器

下載