首頁 感測器 溫度感測器 數位溫度感測器
首頁
感測器
溫度感測器
數位溫度感測器

TMP451-Q1

現行

具有 N 係數、濾波及串聯 R 校正功能的汽車 1.7V 遠端與本機溫度感測器

立即訂購
產品規格表

TMP451-Q1

現行
產品規格表 立即訂購

產品詳細資料

Local sensor accuracy (max) 1 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 40 Temp resolution (max) (Bits) 12 Remote channels (#) 1 Addresses 1 Rating Automotive TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 1 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 40 Temp resolution (max) (Bits) 12 Remote channels (#) 1 Addresses 1 Rating Automotive TI functional safety category Functional Safety-Capable
WSON (DQF) 8 4 mm² 2 x 2 WSON (DQW) 8 5 mm² 2.5 x 2
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • ±1°C accuracy for local and remote diode sensors
  • 0.0625°C resolution for local and remote channels
  • 1.7-V to 3.6-V supply and logic voltage range
  • 27-µA operating current, 3-µA shutdown current
  • Series resistance cancellation
  • η-factor and offset correction
  • Programmable digital filter
  • Diode fault detection
  • Two-wire and SMBus™ serial interface
  • 8-pin WSON (WDFN) packages
    • 2.50-mm × 2.50-mm with Wettable Flanks (DQW)
    • 2.00-mm × 2.00-mm (DQF)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • ±1°C accuracy for local and remote diode sensors
  • 0.0625°C resolution for local and remote channels
  • 1.7-V to 3.6-V supply and logic voltage range
  • 27-µA operating current, 3-µA shutdown current
  • Series resistance cancellation
  • η-factor and offset correction
  • Programmable digital filter
  • Diode fault detection
  • Two-wire and SMBus™ serial interface
  • 8-pin WSON (WDFN) packages
    • 2.50-mm × 2.50-mm with Wettable Flanks (DQW)
    • 2.00-mm × 2.00-mm (DQF)

The TMP451-Q1 device is a high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of microprocessors, microcontrollers, or FPGAs. The temperature is represented as a 12-bit digital code for both the local and the remote sensors, giving a resolution of 0.0625°C. The temperature accuracy is ±1°C (maximum) in the typical operating range for the local and the remote temperature sensors. The two-wire serial interface accepts the SMBus communication protocol.

Advanced features such as series resistance cancellation, programmable nonideality factor (η-factor), programmable offset, programmable temperature limits, and a programmable digital filter are combined to provide a robust thermal monitoring solution with improved accuracy and noise immunity.

The TMP451-Q1 device is ideal for multi-location, high-accuracy temperature measurements in a variety of automotive sub-systems. The TMP451-Q1 is available in a Wettable Flanks WSON package that provides a visual indicator of solderability to lower automatic visual inspection (AVI) time. The device is specified for operation over a supply voltage range of 1.7 V to 3.6 V and a temperature range of –40°C to 125°C.

The TMP451-Q1 device is a high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of microprocessors, microcontrollers, or FPGAs. The temperature is represented as a 12-bit digital code for both the local and the remote sensors, giving a resolution of 0.0625°C. The temperature accuracy is ±1°C (maximum) in the typical operating range for the local and the remote temperature sensors. The two-wire serial interface accepts the SMBus communication protocol.

Advanced features such as series resistance cancellation, programmable nonideality factor (η-factor), programmable offset, programmable temperature limits, and a programmable digital filter are combined to provide a robust thermal monitoring solution with improved accuracy and noise immunity.

The TMP451-Q1 device is ideal for multi-location, high-accuracy temperature measurements in a variety of automotive sub-systems. The TMP451-Q1 is available in a Wettable Flanks WSON package that provides a visual indicator of solderability to lower automatic visual inspection (AVI) time. The device is specified for operation over a supply voltage range of 1.7 V to 3.6 V and a temperature range of –40°C to 125°C.
filter 尋找其它 數位溫度感測器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TMP451-Q1 ±1°C Remote and Local Temperature Sensor With η-Factor and Offset Correction, Series-Resistance Cancellation, and Programmable Digital Filter datasheet (Rev. C) PDF | HTML 2021年 4月 15日
Functional safety information TMP451-Q1 Functional Safety FIT Rate and FMD (Rev. A) PDF | HTML 2024年 6月 4日
Application brief Improving System Reliability in Auto and Ind. Cameras w/ AccurateTemp. Sensing PDF | HTML 2022年 1月 3日
Application note Meeting ASIL Requirements for LIDAR Systems Using Remote Temperature Sensors PDF | HTML 2021年 11月 16日
Technical article How to maximize powertrain efficiency and reliability with high-accuracy temperatu PDF | HTML 2021年 5月 10日
Technical article How to enable thermal safety for automotive infotainment and cluster systems PDF | HTML 2019年 10月 15日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMP451EVM — TMP451 1.7-V 遠端與本機溫度感測器評估模組

The TMP451EVM is an evaluation module that is used to fully evaluate the TMP451, a 1.8V remote temperature sensor. The TMP451 has the capability of measuring remote temperatures and on-chip temperatures. The TMP451 is an integrated circuit that provides 1˚C accuracy temperature measurement with (...)
使用指南: PDF
View Options
支援軟體

SBOC436 — TMP451EVM Software

支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
TMP451 — 具 N-Factor 和串聯 R 校正的 1.7-V 遠端和本機溫度感測器 TMP451-Q1 — 具有 N 係數、濾波及串聯 R 校正功能的汽車 1.7V 遠端與本機溫度感測器
硬體開發
開發板
TMP451EVM — TMP451 1.7-V 遠端與本機溫度感測器評估模組
下載
支援軟體

SBOC437 — TMP451EVM Source Code

支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
TMP451 — 具 N-Factor 和串聯 R 校正的 1.7-V 遠端和本機溫度感測器 TMP451-Q1 — 具有 N 係數、濾波及串聯 R 校正功能的汽車 1.7V 遠端與本機溫度感測器
硬體開發
開發板
TMP451EVM — TMP451 1.7-V 遠端與本機溫度感測器評估模組
下載
模擬型號

TMP451 IBIS Model

SBOM836.ZIP (59 KB) - IBIS Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DQF) 8 Ultra Librarian
WSON (DQW) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片